[patch i2o 6/6] i2o debug output cleanup

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



fixed output of i2o debug messages, extra KERN_ are removed

Signed-off-by:	Vasily Averin <[email protected]>

--- lk2.6/drivers/message/i2o/debug.c
+++ lk2.6/drivers/message/i2o/debug.c
@@ -24,7 +24,7 @@ void i2o_report_status(const char *sever
 	if (cmd == I2O_CMD_UTIL_EVT_REGISTER)
 		return;		// No status in this reply

-	printk(KERN_DEBUG "%s%s: ", severity, str);
+	printk("%s%s: ", severity, str);

 	if (cmd < 0x1F)		// Utility cmd
 		i2o_report_util_cmd(cmd);
@@ -32,7 +32,7 @@ void i2o_report_status(const char *sever
 	else if (cmd >= 0xA0 && cmd <= 0xEF)	// Executive cmd
 		i2o_report_exec_cmd(cmd);
 	else
-		printk(KERN_DEBUG "Cmd = %0#2x, ", cmd);	// Other cmds
+		printk("Cmd = %0#2x, ", cmd);	// Other cmds

 	if (msg[0] & MSG_FAIL) {
 		i2o_report_fail_status(req_status, msg);
@@ -44,7 +44,7 @@ void i2o_report_status(const char *sever
 	if (cmd < 0x1F || (cmd >= 0xA0 && cmd <= 0xEF))
 		i2o_report_common_dsc(detailed_status);
 	else
-		printk(KERN_DEBUG " / DetailedStatus = %0#4x.\n",
+		printk(" / DetailedStatus = %0#4x.\n",
 		       detailed_status);
 }

@@ -89,10 +89,10 @@ static void i2o_report_fail_status(u8 re
 	};

 	if (req_status == I2O_FSC_TRANSPORT_UNKNOWN_FAILURE)
-		printk(KERN_DEBUG "TRANSPORT_UNKNOWN_FAILURE (%0#2x).\n",
+		printk("TRANSPORT_UNKNOWN_FAILURE (%0#2x).\n",
 		       req_status);
 	else
-		printk(KERN_DEBUG "TRANSPORT_%s.\n",
+		printk("TRANSPORT_%s.\n",
 		       FAIL_STATUS[req_status & 0x0F]);

 	/* Dump some details */
@@ -104,7 +104,7 @@ static void i2o_report_fail_status(u8 re
 	printk(KERN_ERR "  FailingHostUnit = 0x%04X,  FailingIOP = 0x%03X\n",
 	       msg[5] >> 16, msg[5] & 0xFFF);

-	printk(KERN_ERR "  Severity:  0x%02X ", (msg[4] >> 16) & 0xFF);
+	printk(KERN_ERR "  Severity:  0x%02X\n", (msg[4] >> 16) & 0xFF);
 	if (msg[4] & (1 << 16))
 		printk(KERN_DEBUG "(FormatError), "
 		       "this msg can never be delivered/processed.\n");
@@ -142,9 +142,9 @@ static void i2o_report_common_status(u8
 	};

 	if (req_status >= ARRAY_SIZE(REPLY_STATUS))
-		printk(KERN_DEBUG "RequestStatus = %0#2x", req_status);
+		printk("RequestStatus = %0#2x", req_status);
 	else
-		printk(KERN_DEBUG "%s", REPLY_STATUS[req_status]);
+		printk("%s", REPLY_STATUS[req_status]);
 }

 /*
@@ -187,10 +187,10 @@ static void i2o_report_common_dsc(u16 de
 	};

 	if (detailed_status > I2O_DSC_DEVICE_NOT_AVAILABLE)
-		printk(KERN_DEBUG " / DetailedStatus = %0#4x.\n",
+		printk(" / DetailedStatus = %0#4x.\n",
 		       detailed_status);
 	else
-		printk(KERN_DEBUG " / %s.\n", COMMON_DSC[detailed_status]);
+		printk(" / %s.\n", COMMON_DSC[detailed_status]);
 }

 /*
@@ -200,49 +200,49 @@ static void i2o_report_util_cmd(u8 cmd)
 {
 	switch (cmd) {
 	case I2O_CMD_UTIL_NOP:
-		printk(KERN_DEBUG "UTIL_NOP, ");
+		printk("UTIL_NOP, ");
 		break;
 	case I2O_CMD_UTIL_ABORT:
-		printk(KERN_DEBUG "UTIL_ABORT, ");
+		printk("UTIL_ABORT, ");
 		break;
 	case I2O_CMD_UTIL_CLAIM:
-		printk(KERN_DEBUG "UTIL_CLAIM, ");
+		printk("UTIL_CLAIM, ");
 		break;
 	case I2O_CMD_UTIL_RELEASE:
-		printk(KERN_DEBUG "UTIL_CLAIM_RELEASE, ");
+		printk("UTIL_CLAIM_RELEASE, ");
 		break;
 	case I2O_CMD_UTIL_CONFIG_DIALOG:
-		printk(KERN_DEBUG "UTIL_CONFIG_DIALOG, ");
+		printk("UTIL_CONFIG_DIALOG, ");
 		break;
 	case I2O_CMD_UTIL_DEVICE_RESERVE:
-		printk(KERN_DEBUG "UTIL_DEVICE_RESERVE, ");
+		printk("UTIL_DEVICE_RESERVE, ");
 		break;
 	case I2O_CMD_UTIL_DEVICE_RELEASE:
-		printk(KERN_DEBUG "UTIL_DEVICE_RELEASE, ");
+		printk("UTIL_DEVICE_RELEASE, ");
 		break;
 	case I2O_CMD_UTIL_EVT_ACK:
-		printk(KERN_DEBUG "UTIL_EVENT_ACKNOWLEDGE, ");
+		printk("UTIL_EVENT_ACKNOWLEDGE, ");
 		break;
 	case I2O_CMD_UTIL_EVT_REGISTER:
-		printk(KERN_DEBUG "UTIL_EVENT_REGISTER, ");
+		printk("UTIL_EVENT_REGISTER, ");
 		break;
 	case I2O_CMD_UTIL_LOCK:
-		printk(KERN_DEBUG "UTIL_LOCK, ");
+		printk("UTIL_LOCK, ");
 		break;
 	case I2O_CMD_UTIL_LOCK_RELEASE:
-		printk(KERN_DEBUG "UTIL_LOCK_RELEASE, ");
+		printk("UTIL_LOCK_RELEASE, ");
 		break;
 	case I2O_CMD_UTIL_PARAMS_GET:
-		printk(KERN_DEBUG "UTIL_PARAMS_GET, ");
+		printk("UTIL_PARAMS_GET, ");
 		break;
 	case I2O_CMD_UTIL_PARAMS_SET:
-		printk(KERN_DEBUG "UTIL_PARAMS_SET, ");
+		printk("UTIL_PARAMS_SET, ");
 		break;
 	case I2O_CMD_UTIL_REPLY_FAULT_NOTIFY:
-		printk(KERN_DEBUG "UTIL_REPLY_FAULT_NOTIFY, ");
+		printk("UTIL_REPLY_FAULT_NOTIFY, ");
 		break;
 	default:
-		printk(KERN_DEBUG "Cmd = %0#2x, ", cmd);
+		printk("Cmd = %0#2x, ", cmd);
 	}
 }

@@ -253,106 +253,106 @@ static void i2o_report_exec_cmd(u8 cmd)
 {
 	switch (cmd) {
 	case I2O_CMD_ADAPTER_ASSIGN:
-		printk(KERN_DEBUG "EXEC_ADAPTER_ASSIGN, ");
+		printk("EXEC_ADAPTER_ASSIGN, ");
 		break;
 	case I2O_CMD_ADAPTER_READ:
-		printk(KERN_DEBUG "EXEC_ADAPTER_READ, ");
+		printk("EXEC_ADAPTER_READ, ");
 		break;
 	case I2O_CMD_ADAPTER_RELEASE:
-		printk(KERN_DEBUG "EXEC_ADAPTER_RELEASE, ");
+		printk("EXEC_ADAPTER_RELEASE, ");
 		break;
 	case I2O_CMD_BIOS_INFO_SET:
-		printk(KERN_DEBUG "EXEC_BIOS_INFO_SET, ");
+		printk("EXEC_BIOS_INFO_SET, ");
 		break;
 	case I2O_CMD_BOOT_DEVICE_SET:
-		printk(KERN_DEBUG "EXEC_BOOT_DEVICE_SET, ");
+		printk("EXEC_BOOT_DEVICE_SET, ");
 		break;
 	case I2O_CMD_CONFIG_VALIDATE:
-		printk(KERN_DEBUG "EXEC_CONFIG_VALIDATE, ");
+		printk("EXEC_CONFIG_VALIDATE, ");
 		break;
 	case I2O_CMD_CONN_SETUP:
-		printk(KERN_DEBUG "EXEC_CONN_SETUP, ");
+		printk("EXEC_CONN_SETUP, ");
 		break;
 	case I2O_CMD_DDM_DESTROY:
-		printk(KERN_DEBUG "EXEC_DDM_DESTROY, ");
+		printk("EXEC_DDM_DESTROY, ");
 		break;
 	case I2O_CMD_DDM_ENABLE:
-		printk(KERN_DEBUG "EXEC_DDM_ENABLE, ");
+		printk("EXEC_DDM_ENABLE, ");
 		break;
 	case I2O_CMD_DDM_QUIESCE:
-		printk(KERN_DEBUG "EXEC_DDM_QUIESCE, ");
+		printk("EXEC_DDM_QUIESCE, ");
 		break;
 	case I2O_CMD_DDM_RESET:
-		printk(KERN_DEBUG "EXEC_DDM_RESET, ");
+		printk("EXEC_DDM_RESET, ");
 		break;
 	case I2O_CMD_DDM_SUSPEND:
-		printk(KERN_DEBUG "EXEC_DDM_SUSPEND, ");
+		printk("EXEC_DDM_SUSPEND, ");
 		break;
 	case I2O_CMD_DEVICE_ASSIGN:
-		printk(KERN_DEBUG "EXEC_DEVICE_ASSIGN, ");
+		printk("EXEC_DEVICE_ASSIGN, ");
 		break;
 	case I2O_CMD_DEVICE_RELEASE:
-		printk(KERN_DEBUG "EXEC_DEVICE_RELEASE, ");
+		printk("EXEC_DEVICE_RELEASE, ");
 		break;
 	case I2O_CMD_HRT_GET:
-		printk(KERN_DEBUG "EXEC_HRT_GET, ");
+		printk("EXEC_HRT_GET, ");
 		break;
 	case I2O_CMD_ADAPTER_CLEAR:
-		printk(KERN_DEBUG "EXEC_IOP_CLEAR, ");
+		printk("EXEC_IOP_CLEAR, ");
 		break;
 	case I2O_CMD_ADAPTER_CONNECT:
-		printk(KERN_DEBUG "EXEC_IOP_CONNECT, ");
+		printk("EXEC_IOP_CONNECT, ");
 		break;
 	case I2O_CMD_ADAPTER_RESET:
-		printk(KERN_DEBUG "EXEC_IOP_RESET, ");
+		printk("EXEC_IOP_RESET, ");
 		break;
 	case I2O_CMD_LCT_NOTIFY:
-		printk(KERN_DEBUG "EXEC_LCT_NOTIFY, ");
+		printk("EXEC_LCT_NOTIFY, ");
 		break;
 	case I2O_CMD_OUTBOUND_INIT:
-		printk(KERN_DEBUG "EXEC_OUTBOUND_INIT, ");
+		printk("EXEC_OUTBOUND_INIT, ");
 		break;
 	case I2O_CMD_PATH_ENABLE:
-		printk(KERN_DEBUG "EXEC_PATH_ENABLE, ");
+		printk("EXEC_PATH_ENABLE, ");
 		break;
 	case I2O_CMD_PATH_QUIESCE:
-		printk(KERN_DEBUG "EXEC_PATH_QUIESCE, ");
+		printk("EXEC_PATH_QUIESCE, ");
 		break;
 	case I2O_CMD_PATH_RESET:
-		printk(KERN_DEBUG "EXEC_PATH_RESET, ");
+		printk("EXEC_PATH_RESET, ");
 		break;
 	case I2O_CMD_STATIC_MF_CREATE:
-		printk(KERN_DEBUG "EXEC_STATIC_MF_CREATE, ");
+		printk("EXEC_STATIC_MF_CREATE, ");
 		break;
 	case I2O_CMD_STATIC_MF_RELEASE:
-		printk(KERN_DEBUG "EXEC_STATIC_MF_RELEASE, ");
+		printk("EXEC_STATIC_MF_RELEASE, ");
 		break;
 	case I2O_CMD_STATUS_GET:
-		printk(KERN_DEBUG "EXEC_STATUS_GET, ");
+		printk("EXEC_STATUS_GET, ");
 		break;
 	case I2O_CMD_SW_DOWNLOAD:
-		printk(KERN_DEBUG "EXEC_SW_DOWNLOAD, ");
+		printk("EXEC_SW_DOWNLOAD, ");
 		break;
 	case I2O_CMD_SW_UPLOAD:
-		printk(KERN_DEBUG "EXEC_SW_UPLOAD, ");
+		printk("EXEC_SW_UPLOAD, ");
 		break;
 	case I2O_CMD_SW_REMOVE:
-		printk(KERN_DEBUG "EXEC_SW_REMOVE, ");
+		printk("EXEC_SW_REMOVE, ");
 		break;
 	case I2O_CMD_SYS_ENABLE:
-		printk(KERN_DEBUG "EXEC_SYS_ENABLE, ");
+		printk("EXEC_SYS_ENABLE, ");
 		break;
 	case I2O_CMD_SYS_MODIFY:
-		printk(KERN_DEBUG "EXEC_SYS_MODIFY, ");
+		printk("EXEC_SYS_MODIFY, ");
 		break;
 	case I2O_CMD_SYS_QUIESCE:
-		printk(KERN_DEBUG "EXEC_SYS_QUIESCE, ");
+		printk("EXEC_SYS_QUIESCE, ");
 		break;
 	case I2O_CMD_SYS_TAB_SET:
-		printk(KERN_DEBUG "EXEC_SYS_TAB_SET, ");
+		printk("EXEC_SYS_TAB_SET, ");
 		break;
 	default:
-		printk(KERN_DEBUG "Cmd = %#02x, ", cmd);
+		printk("Cmd = %#02x, ", cmd);
 	}
 }

@@ -361,28 +361,28 @@ void i2o_debug_state(struct i2o_controll
 	printk(KERN_INFO "%s: State = ", c->name);
 	switch (((i2o_status_block *) c->status_block.virt)->iop_state) {
 	case 0x01:
-		printk(KERN_DEBUG "INIT\n");
+		printk("INIT\n");
 		break;
 	case 0x02:
-		printk(KERN_DEBUG "RESET\n");
+		printk("RESET\n");
 		break;
 	case 0x04:
-		printk(KERN_DEBUG "HOLD\n");
+		printk("HOLD\n");
 		break;
 	case 0x05:
-		printk(KERN_DEBUG "READY\n");
+		printk("READY\n");
 		break;
 	case 0x08:
-		printk(KERN_DEBUG "OPERATIONAL\n");
+		printk("OPERATIONAL\n");
 		break;
 	case 0x10:
-		printk(KERN_DEBUG "FAILED\n");
+		printk("FAILED\n");
 		break;
 	case 0x11:
-		printk(KERN_DEBUG "FAULTED\n");
+		printk("FAULTED\n");
 		break;
 	default:
-		printk(KERN_DEBUG "%x (unknown !!)\n",
+		printk("%x (unknown !!)\n",
 		       ((i2o_status_block *) c->status_block.virt)->iop_state);
 	}
 };
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux