On Thu, 10 May 2007 15:05:25 +0200
Remi Colinet <[email protected]> wrote:
> My D610 ALPS Glide Point is unresponsive with 2.6.21-mm1 patch.
> No problem noticed with 2.6.21.
>
> The culprit seems to be git-input. I have applied 2.6.21-mm1 on top of 2.6.21
> and then removed git-input patch. It is ok since then.
>
> >From what i can see, no interrupt is raised from the GlidePoint with git-input
> applied. IRQ count 12 does not increase. It is when using the touchpad.
>
> CPU0
> 0: 160 IO-APIC-edge timer
> 1: 935 IO-APIC-edge i8042
> 7: 0 IO-APIC-edge parport0
> 8: 1 IO-APIC-edge rtc
> 9: 2 IO-APIC-fasteoi acpi
> => 12: 114 IO-APIC-edge i8042 <=
> 14: 3223 IO-APIC-edge libata
> 15: 5 IO-APIC-edge libata
> 16: 0 IO-APIC-fasteoi uhci_hcd:usb1, ehci_hcd:usb5, Intel ICH6
> 17: 1 IO-APIC-fasteoi uhci_hcd:usb2, ipw2200, Intel ICH6 Modem
> 18: 0 IO-APIC-fasteoi uhci_hcd:usb3
> 19: 1 IO-APIC-fasteoi uhci_hcd:usb4, yenta
> NMI: 0
> LOC: 4051
> ERR: 0
> MIS: 0
>
> I have also tried to disable the ALPS driver in the .config file. IRQ 12 are
> then raised when using the Glide Point. X refuses to start.
>
Are you able to test 2.6.21-mm2?
Thanks.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
