This converts libata to using the sg helpers for looking up sg
elements, instead of doing it manually.
Signed-off-by: Jens Axboe <[email protected]>
---
drivers/ata/libata-core.c | 30 ++++++++++++++++--------------
include/linux/libata.h | 16 ++++++++++------
2 files changed, 26 insertions(+), 20 deletions(-)
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 4595d1f..fabb1f4 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -1370,7 +1370,7 @@ static void ata_qc_complete_internal(struct ata_queued_cmd *qc)
*/
unsigned ata_exec_internal_sg(struct ata_device *dev,
struct ata_taskfile *tf, const u8 *cdb,
- int dma_dir, struct scatterlist *sg,
+ int dma_dir, struct scatterlist *sgl,
unsigned int n_elem)
{
struct ata_port *ap = dev->ap;
@@ -1428,11 +1428,12 @@ unsigned ata_exec_internal_sg(struct ata_device *dev,
qc->dma_dir = dma_dir;
if (dma_dir != DMA_NONE) {
unsigned int i, buflen = 0;
+ struct scatterlist *sg;
- for (i = 0; i < n_elem; i++)
- buflen += sg[i].length;
+ for_each_sg(sgl, sg, n_elem, i)
+ buflen += sg->length;
- ata_sg_init(qc, sg, n_elem);
+ ata_sg_init(qc, sgl, n_elem);
qc->nbytes = buflen;
}
@@ -3982,7 +3983,7 @@ void ata_sg_clean(struct ata_queued_cmd *qc)
if (qc->n_elem)
dma_unmap_sg(ap->dev, sg, qc->n_elem, dir);
/* restore last sg */
- sg[qc->orig_n_elem - 1].length += qc->pad_len;
+ sg_last(sg, qc->orig_n_elem)->length += qc->pad_len;
if (pad_buf) {
struct scatterlist *psg = &qc->pad_sgent;
void *addr = kmap_atomic(psg->page, KM_IRQ0);
@@ -4141,6 +4142,7 @@ void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen)
qc->orig_n_elem = 1;
qc->buf_virt = buf;
qc->nbytes = buflen;
+ qc->cursg = qc->__sg;
sg_init_one(&qc->sgent, buf, buflen);
}
@@ -4166,6 +4168,7 @@ void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg,
qc->__sg = sg;
qc->n_elem = n_elem;
qc->orig_n_elem = n_elem;
+ qc->cursg = qc->__sg;
}
/**
@@ -4255,7 +4258,7 @@ static int ata_sg_setup(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct scatterlist *sg = qc->__sg;
- struct scatterlist *lsg = &sg[qc->n_elem - 1];
+ struct scatterlist *lsg = sg_last(qc->__sg, qc->n_elem);
int n_elem, pre_n_elem, dir, trim_sg = 0;
VPRINTK("ENTER, ata%u\n", ap->print_id);
@@ -4419,7 +4422,6 @@ void ata_data_xfer_noirq(struct ata_device *adev, unsigned char *buf,
static void ata_pio_sector(struct ata_queued_cmd *qc)
{
int do_write = (qc->tf.flags & ATA_TFLAG_WRITE);
- struct scatterlist *sg = qc->__sg;
struct ata_port *ap = qc->ap;
struct page *page;
unsigned int offset;
@@ -4428,8 +4430,8 @@ static void ata_pio_sector(struct ata_queued_cmd *qc)
if (qc->curbytes == qc->nbytes - qc->sect_size)
ap->hsm_task_state = HSM_ST_LAST;
- page = sg[qc->cursg].page;
- offset = sg[qc->cursg].offset + qc->cursg_ofs;
+ page = qc->cursg->page;
+ offset = qc->cursg->offset + qc->cursg_ofs;
/* get the current page and offset */
page = nth_page(page, (offset >> PAGE_SHIFT));
@@ -4457,8 +4459,8 @@ static void ata_pio_sector(struct ata_queued_cmd *qc)
qc->curbytes += qc->sect_size;
qc->cursg_ofs += qc->sect_size;
- if (qc->cursg_ofs == (&sg[qc->cursg])->length) {
- qc->cursg++;
+ if (qc->cursg_ofs == qc->cursg->length) {
+ qc->cursg = sg_next(qc->cursg);
qc->cursg_ofs = 0;
}
}
@@ -4551,7 +4553,7 @@ static void __atapi_pio_bytes(struct ata_queued_cmd *qc, unsigned int bytes)
ap->hsm_task_state = HSM_ST_LAST;
next_sg:
- if (unlikely(qc->cursg >= qc->n_elem)) {
+ if (unlikely(qc->cursg == sg_last(qc->__sg, qc->n_elem))) {
/*
* The end of qc->sg is reached and the device expects
* more data to transfer. In order not to overrun qc->sg
@@ -4574,7 +4576,7 @@ next_sg:
return;
}
- sg = &qc->__sg[qc->cursg];
+ sg = qc->cursg;
page = sg->page;
offset = sg->offset + qc->cursg_ofs;
@@ -4613,7 +4615,7 @@ next_sg:
qc->cursg_ofs += count;
if (qc->cursg_ofs == sg->length) {
- qc->cursg++;
+ qc->cursg = sg_next(qc->cursg);
qc->cursg_ofs = 0;
}
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 7906d75..8fad10e 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -30,7 +30,7 @@
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
-#include <asm/scatterlist.h>
+#include <linux/scatterlist.h>
#include <linux/io.h>
#include <linux/ata.h>
#include <linux/workqueue.h>
@@ -388,6 +388,7 @@ struct ata_queued_cmd {
unsigned long flags; /* ATA_QCFLAG_xxx */
unsigned int tag;
unsigned int n_elem;
+ unsigned int n_iter;
unsigned int orig_n_elem;
int dma_dir;
@@ -398,7 +399,7 @@ struct ata_queued_cmd {
unsigned int nbytes;
unsigned int curbytes;
- unsigned int cursg;
+ struct scatterlist *cursg;
unsigned int cursg_ofs;
struct scatterlist sgent;
@@ -935,7 +936,7 @@ ata_sg_is_last(struct scatterlist *sg, struct ata_queued_cmd *qc)
return 1;
if (qc->pad_len)
return 0;
- if (((sg - qc->__sg) + 1) == qc->n_elem)
+ if (qc->n_iter == qc->n_elem)
return 1;
return 0;
}
@@ -943,6 +944,7 @@ ata_sg_is_last(struct scatterlist *sg, struct ata_queued_cmd *qc)
static inline struct scatterlist *
ata_qc_first_sg(struct ata_queued_cmd *qc)
{
+ qc->n_iter = 0;
if (qc->n_elem)
return qc->__sg;
if (qc->pad_len)
@@ -955,8 +957,8 @@ ata_qc_next_sg(struct scatterlist *sg, struct ata_queued_cmd *qc)
{
if (sg == &qc->pad_sgent)
return NULL;
- if (++sg - qc->__sg < qc->n_elem)
- return sg;
+ if (++qc->n_iter < qc->n_elem)
+ return sg_next(sg);
if (qc->pad_len)
return &qc->pad_sgent;
return NULL;
@@ -1157,9 +1159,11 @@ static inline void ata_qc_reinit(struct ata_queued_cmd *qc)
qc->dma_dir = DMA_NONE;
qc->__sg = NULL;
qc->flags = 0;
- qc->cursg = qc->cursg_ofs = 0;
+ qc->cursg = NULL;
+ qc->cursg_ofs = 0;
qc->nbytes = qc->curbytes = 0;
qc->n_elem = 0;
+ qc->n_iter = 0;
qc->err_mask = 0;
qc->pad_len = 0;
qc->sect_size = ATA_SECT_SIZE;
--
1.5.2.rc1
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]