Re: [PATCH 1/2] leds:arch/sh/boards/landisk LEDs supports

["kogiidena" <kogiidena@eggplant.ddo.jp>]

> On Wed, 2007-05-09 at 23:26 +0900, kogiidena wrote:
>> Hi Richard-san
>> The following three points were corrected.
>> 1.
>> > You can't do this since the trigger will appear for all LEDs and it only
>> > applies to a single LED. There has been previous discussion of LED
>> > specific triggers and we'll need that support before you can make
>> > something like this work. Nobody has sent me a patch for that yet and I
>> > haven't had time to write one...
>> The trigger name past "disk" was changed to the name "hard".
>> This is to mean the hardware of LANDISK controls LED.
>> The problem of "LED specific triggers" is solved.
>
> No, its not solved.
>
> Imagine I connect some device with its own LEDs and LED drivers. I'll
> use "corgi:amber" as an example.
>
> I run:
>
> 'cat /sys/class/leds/corgi:amber/triggers'
>
> I see "hard" listed.
>
> 'echo "hard" > /sys/class/leds/corgi:amber/triggers'
>
> doesn't work though...
>
> If its not going to work, it shouldn't be listed.
>
> Regards,
>
> Richard
>

I think, "Solved it" because I changed the source code.

LANDISK have two LED.
One is power-led. The other is status-led.
Power-led and status-led can respectively set "hard", and it operates normally.

'echo "hard" >  /sys/class/leds/power/triggers'
It works. Power-led behaves as always lights.
Power-led is controlled with hardware based on specific logic (CPLD) in LANDISK.

'echo "hard" >  /sys/class/leds/status/triggers'
It works too. Status-LED behaves as HDD-access-LED.
Status-led is controlled with hardware based on specific logic (CPLD) in LANDISK too.

+/*
+ * LANDISK hardware controled LED trigger
+ *
+ *  bit[3:0] = x0xx : power-led  is allways ON.
+ *  bit[3:0] = x1x0 : power-led  is ON.
+ *  bit[3:0] = x1x1 : power-led  is OFF.
+ *  bit[3:0] = 0xxx : status-led is HDD access-LED.
+ *  bit[3:0] = 1x0x : status-led is ON
+ *  bit[3:0] = 1x1x : status-led is OFF
+ */
+static void landisk_hard_trig_activate(struct led_classdev *led_cdev)
+{
+        unsigned long flags;
+        int bitmask;
+
+        bitmask = 0x04 << (led_cdev - &landisk_leds[0]);
+
+        spin_lock_irqsave(&landisk_led_lock, flags);
+        ctrl_outb(ctrl_inb(PA_LED) & ~bitmask, PA_LED);
+        spin_unlock_irqrestore(&landisk_led_lock, flags);
+}
+
+static void landisk_hard_trig_deactivate(struct led_classdev *led_cdev)
+{
+        unsigned long flags;
+        int bitmask;
+
+        bitmask = 0x04 << (led_cdev - &landisk_leds[0]);
+
+        spin_lock_irqsave(&landisk_led_lock, flags);
+        ctrl_outb(ctrl_inb(PA_LED) | bitmask, PA_LED);
+        spin_unlock_irqrestore(&landisk_led_lock, flags);
+}
+

kogiidena



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/