[PATCH 4/8] Force detect and enable HPET on ICH

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Force detect and/or enable HPET on ICH chipsets. This patch just handles the
detection part and following patches use this information.

Signed-off-by: Venkatesh Pallipadi <[email protected]>

Index: linux-2.6.21-rc-mm-hpet/arch/i386/kernel/quirks.c
===================================================================
--- linux-2.6.21-rc-mm-hpet.orig/arch/i386/kernel/quirks.c	2007-02-04 10:44:54.000000000 -0800
+++ linux-2.6.21-rc-mm-hpet/arch/i386/kernel/quirks.c	2007-04-18 11:08:43.000000000 -0700
@@ -6,6 +6,7 @@
 #include <asm/pci-direct.h>
 #include <asm/genapic.h>
 #include <asm/cpu.h>
+#include <asm/hpet.h>
 
 #if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_SMP) && defined(CONFIG_PCI)
 static void __devinit verify_quirk_intel_irqbalance(struct pci_dev *dev)
@@ -97,3 +98,125 @@
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,   PCI_DEVICE_ID_INTEL_E7520_MCH,  verify_quirk_intel_irqbalance);
 
 #endif
+
+#if defined(CONFIG_HPET_TIMER)
+unsigned long force_hpet_address;
+
+static void __iomem *rcba_base;
+
+#ifdef CONFIG_PM
+static int force_hpet_resume(struct sys_device *sys_device)
+{
+	u32 val;
+
+	if (!force_hpet_address)
+		return 0;
+
+	if (rcba_base == NULL)
+		BUG();
+
+	/* read the Function Disable register, dword mode only */
+	val = readl(rcba_base + 0x3404);
+	if (!(val & 0x80)) {
+		/* HPET disabled in HPTC. Trying to enable */
+		writel(val | 0x80, rcba_base + 0x3404);
+	}
+
+	val = readl(rcba_base + 0x3404);
+	if (!(val & 0x80))
+		BUG();
+	else
+		printk(KERN_DEBUG "Force enabled HPET at resume\n");
+
+	return 0;
+}
+
+static struct sysdev_class force_hpet_class = {
+	set_kset_name("force_hpet"),
+	.resume		= force_hpet_resume,
+};
+
+static struct sys_device force_hpet_device = {
+	.id		= 0,
+	.cls		= &force_hpet_class,
+};
+#endif
+
+static void ich_force_enable_hpet(struct pci_dev *dev)
+{
+	u32 val, rcba;
+	int err = 0;
+
+	if (hpet_address || force_hpet_address)
+		return;
+
+	pci_read_config_dword(dev, 0xF0, &rcba);
+	rcba &= 0xFFFFC000;
+	if (rcba == 0) {
+		printk(KERN_DEBUG "RCBA disabled. Cannot force enable HPET\n");
+		return;
+	}
+
+	/* use bits 31:14, 16 kB aligned */
+	rcba_base = ioremap_nocache(rcba, 0x4000);
+	if (rcba_base == NULL) {
+		printk(KERN_DEBUG "ioremap failed. Cannot force enable HPET\n");
+		return;
+	}
+
+	/* read the Function Disable register, dword mode only */
+	val = readl(rcba_base + 0x3404);
+
+	if (val & 0x80) {
+		/* HPET is enabled in HPTC. Just not reported by BIOS */
+		val = val & 0x3;
+		force_hpet_address = 0xFED00000 | (val << 12);
+		printk(KERN_DEBUG "Force enabled HPET at base address 0x%lx\n",
+			       force_hpet_address);
+		iounmap(rcba_base);
+		return;
+	}
+
+	/* HPET disabled in HPTC. Trying to enable */
+	writel(val | 0x80, rcba_base + 0x3404);
+
+	val = readl(rcba_base + 0x3404);
+	if (!(val & 0x80)) {
+		err = 1;
+	} else {
+		val = val & 0x3;
+		force_hpet_address = 0xFED00000 | (val << 12);
+
+#ifdef CONFIG_PM
+		/* We need to rewrite the PCI space on S3 resume */
+		err = sysdev_class_register(&force_hpet_class);
+		if (!err) {
+			err = sysdev_register(&force_hpet_device);
+			if (err) {
+				sysdev_class_unregister(&force_hpet_class);
+			}
+		}
+#endif
+	}
+
+	if (err) {
+		force_hpet_address = 0;
+		iounmap(rcba_base);
+		printk(KERN_DEBUG "Failed to force enable HPET\n");
+	} else {
+		printk(KERN_DEBUG "Force enabled HPET at base address 0x%lx\n",
+			       force_hpet_address);
+	}
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0,
+                         ich_force_enable_hpet);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1,
+                         ich_force_enable_hpet);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1,
+                         ich_force_enable_hpet);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_31,
+                         ich_force_enable_hpet);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_1,
+                         ich_force_enable_hpet);
+#endif
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux