Re: [PATCH] [1/1] CPU-i386-Geode: Chipset access macros do not work as expected (2nd try)

[Juergen Beisert <juergen127@kreuzholzen.de>]

Hi Andrew,

On Wednesday 02 May 2007 02:48, Andrew Morton wrote:
> On Mon, 30 Apr 2007 17:33:41 +0200
>
> Juergen Beisert <juergen127@kreuzholzen.de> wrote:
> > From: Juergen Beisert <juergen.beisert@weihenstephan.org>
> >
> > Replace NSC/Cyrix specific chipset access macros by inlined functions.
> > With the macros a line like this fails (and does nothing):
> > 	setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x88);
> > With inlined functions this line will work as expected.
> >
> > Note about a side effect: Seems on Geode GX1 based systems the
> > "suspend on halt power saving feature" was never enabled due to this
> > wrong macro expansion. With inlined functions it will be enabled, but
> > this will stop the TSC when the CPU runs into a HLT instruction.
> > Kernel outputs something like this:
> > 	Clocksource tsc unstable (delta = -472746897 ns)
> > Tested on a Geode GX1 system.
> >
> > This is the second version with some modifications suggested by
> > Mikael Pettersson
> >
> > Signed-off-by: Juergen Beisert <juergen.beisert@weihenstephan.org>
> >
> > Index: linux-2.6.21/include/asm-i386/processor.h
> > ===================================================================
> > --- linux-2.6.21.orig/include/asm-i386/processor.h
> > +++ linux-2.6.21/include/asm-i386/processor.h
> > @@ -202,37 +202,6 @@ static inline void clear_in_cr4 (unsigne
> >  	write_cr4(cr4);
> >  }
> >
> > -/*
> > - *      NSC/Cyrix CPU configuration register indexes
> > - */
> > -
> > -#define CX86_PCR0 0x20
> > -#define CX86_GCR  0xb8
> > -#define CX86_CCR0 0xc0
> > -#define CX86_CCR1 0xc1
> > -#define CX86_CCR2 0xc2
> > -#define CX86_CCR3 0xc3
> > -#define CX86_CCR4 0xe8
> > -#define CX86_CCR5 0xe9
> > -#define CX86_CCR6 0xea
> > -#define CX86_CCR7 0xeb
> > -#define CX86_PCR1 0xf0
> > -#define CX86_DIR0 0xfe
> > -#define CX86_DIR1 0xff
> > -#define CX86_ARR_BASE 0xc4
> > -#define CX86_RCR_BASE 0xdc
>
> This clashes with Andi's "msr-index" patch:
>
> ftp://ftp.firstfloor.org/pub/ak/x86_64/quilt/patches/msr-index

I see. He also moves these defines to another file. Not problem where they 
are. But it isn't possible to replace the macros by the inlined functions in 
processor.h. The used outb/inb macros fail for various other files.

> Perhaps it'd be best to wait until msr-index goes upstream and to raise a
> patch then.  Or to redo and retest against 2.6.21-rc7-mm2, which includes
> msr-index.

All right. To wait is no problem for me (my system works with my 
patch.... ;-) )

> Also, include/asm-x86_64/processor.h has a getCx86(), too.  Does it also
> need fixing?

As I can see the macros are used in:
 - i386/kernel/cpu/cpufreq/gx-suspmod.c (ups, its not in my patch, so it is
   currently no complete)
 - i386/kernel/cpu/mtrr/state.c (also not part of my patch yet)
 - i386/kernel/cpu/cyrix.c
 - i386/kernel/cpu/mtrr/cyrix.c

Most comments states Cyrix CPUs when they are using the macros. Is anything 
with Cyrix 64 bit relevant? Maybe "include/asm-x86_64/processor.h" is a 
simple copy of "include/asm-i386/processor.h" and nobody delete the unused 
macros?

Please keep me informed and I will resend the patch.

Juergen
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/