>> eth0: Media selection timer tick.
>> eth0: possible phy reset: re-initializing
>
> This is why the reset is being triggered - it's a workaround for a hardware
> bug which checks to make sure the hardware is in the state that the
> kernel thinks it is is going off. The code has this explanatory comment:
>
> * 2) check for sudden death of the NIC:
> * It seems that a reference set for this chip went out with incorrect info,
> * and there exist boards that aren't quite right. An unexpected voltage
> * drop can cause the PHY to get itself in a weird state (basically reset).
> * NOTE: this only seems to affect revC chips.
Yes. I have revision C chip.
> I'd suggest checking your power supply as a first step.
5,25V when not connected. 5,04V when connected to Wyse. I don't have access to
osciloscope.
I will check if this code is nedded. If it is then I will try to get new power
supply.
> [BTW, as Andrew said please don't drop people from the CC.]
OK. Will not happen again.
Rafał
----------------------------------------------------------------------
Kasia Cichopek eksponuje biust
>>> http://link.interia.pl/f1a6f
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
