Re: [PATCH, try2] Add support for picopower irq router

[Randy Dunlap <randy.dunlap@oracle.com>]

Thomas Backlund wrote:
>

Sorry, I don't see any changes.  Did you send the wrong patch file?

> ------------------------------------------------------------------------
>
>
> This patch adds support for PicoPower PT86C523 IRQ router to be used 
> with the in-kernel yenta driver for CardBus.
> With this patch cardbus works on e.g. Dell Latitude XPi P150CD. 
>
> Initial patch for kernel 2.4 series by Sune Mølgaard
> http://molgaard.org/code/linux-2.4.31-picopower.patch
>
> Ported to 2.6.20 by Chmouel Boudjnah (http://www.chmouel.com)
>
> Tested and confirmed that it works by Austin Acton.
>
> Cleaned up a little for inclusion in a 2.6.21-rc7 & 2.6.21.1 based kernel.
>
> Signed-Off-By: Thomas Backlund <tmb@mandriva.org>
>
>  arch/i386/pci/irq.c     |   38 ++++++++++++++++++++++++++++++++++++++
>  include/linux/pci_ids.h |    3 +++
>  2 files changed, 41 insertions(+)
>
> diff -Nurp 2.6.21-rc7/arch/i386/pci/irq.c 2.6.21-rc7.picopower/arch/i386/pci/irq.c
> --- 2.6.21-rc7/arch/i386/pci/irq.c	2007-02-04 20:44:54.000000000 +0200
> +++ 2.6.21-rc7.picopower/arch/i386/pci/irq.c	2007-04-24 15:26:21.000000000 +0300
> @@ -491,6 +491,24 @@ static int pirq_amd756_set(struct pci_de
>  	return 1;
>  }
>  
> +/*
> + * PicoPower PT86C523
> + */
> +static int pirq_pico_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
> +{
> +	outb(0x10+((pirq-1)>>1), 0x24);
> +	return ((pirq-1)&1) ? (inb(0x26)>>4) : (inb(0x26)&0xf);
> +}
> +
> +static int pirq_pico_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
> +{
> +	outb(0x10+((pirq-1)>>1), 0x24);
> +	unsigned int x;
> +	x = inb(0x26);
> +	x = ((pirq-1)&1) ? ((x&0x0f)|(irq<<4)) : ((x&0xf0)|(irq));
> +	outb(x,0x26);
> +}
> +
>  #ifdef CONFIG_PCI_BIOS
>  
>  static int pirq_bios_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
> @@ -719,6 +737,25 @@ static __init int amd_router_probe(struc
>  	return 1;
>  }
>  		
> +static __init int pico_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
> +{
> +	switch(device)
> +	{
> +	        case PCI_DEVICE_ID_PICOPOWER_PT86C523:
> +			r->name = "PicoPower PT86C523";
> +			r->get = pirq_pico_get;
> +			r->set = pirq_pico_set;
> +			return 1;
> +
> +		case PCI_DEVICE_ID_PICOPOWER_PT86C523BBP:
> +			r->name = "PicoPower PT86C523 rev. BB+";
> +			r->get = pirq_pico_get;
> +			r->set = pirq_pico_set;
> +			return 1;
> +	}
> +	return 0;
> +}
> +
>  static __initdata struct irq_router_handler pirq_routers[] = {
>  	{ PCI_VENDOR_ID_INTEL, intel_router_probe },
>  	{ PCI_VENDOR_ID_AL, ali_router_probe },
> @@ -730,6 +767,7 @@ static __initdata struct irq_router_hand
>  	{ PCI_VENDOR_ID_VLSI, vlsi_router_probe },
>  	{ PCI_VENDOR_ID_SERVERWORKS, serverworks_router_probe },
>  	{ PCI_VENDOR_ID_AMD, amd_router_probe },
> +	{ PCI_VENDOR_ID_PICOPOWER, pico_router_probe },
>  	/* Someone with docs needs to add the ATI Radeon IGP */
>  	{ 0, NULL }
>  };
> diff -Nurp 2.6.21-rc7/include/linux/pci_ids.h 2.6.21-rc7.picopower/include/linux/pci_ids.h
> --- 2.6.21-rc7/include/linux/pci_ids.h	2007-04-24 14:37:59.000000000 +0300
> +++ 2.6.21-rc7.picopower/include/linux/pci_ids.h	2007-04-24 15:26:21.000000000 +0300
> @@ -819,6 +819,9 @@
>  #define PCI_DEVICE_ID_UMC_UM8886BF	0x673a
>  #define PCI_DEVICE_ID_UMC_UM8886A	0x886a
>  
> +#define PCI_VENDOR_ID_PICOPOWER		0x1066
> +#define PCI_DEVICE_ID_PICOPOWER_PT86C523	0x0002
> +#define PCI_DEVICE_ID_PICOPOWER_PT86C523BBP	0x8002
>  
>  #define PCI_VENDOR_ID_MYLEX		0x1069
>  #define PCI_DEVICE_ID_MYLEX_DAC960_P	0x0001


--
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/