Wolfgang Erig wrote:
> Sorry
> for detecting this 2 year old regression so late.
>
> 2.6.13 or later is bad.
> 2.6.12 is good,
>
> "git bisect" worked fine and points to the attached patch.
> The patch is pretty small. The problem seemed to be dependant
> on the PCI-architecture of these particular systems.
> Tried this on two machines with the same behaviour.
>
> Wolfgang
>
>
> $ git bisect bad
> 299de0343c7d18448a69c635378342e9214b14af is first bad commit
> commit 299de0343c7d18448a69c635378342e9214b14af
> Author: Ivan Kokshaysky <[email protected]>
> Date: Wed Jun 15 18:59:27 2005 +0400
>
> [PATCH] PCI: pci_assign_unassigned_resources() on x86
>
> - Add sanity check for io[port,mem]_resource in setup-bus.c. These
> resources look like "free" as they have no parents, but obviously
> we must not touch them.
> - In i386.c:pci_allocate_bus_resources(), if a bridge resource cannot be
> allocated for some reason, then clear its flags. This prevents any child
> allocations in this range, so the setup-bus code will work with a clean
> resource sub-tree.
> - i386.c:pcibios_enable_resources() doesn't enable bridges, as it checks
> only resources 0-5, which looks like a clear bug to me. I suspect it
> might break hotplug as well in some cases.
>
> From: Ivan Kokshaysky <[email protected]>
> Signed-off-by: Greg Kroah-Hartman <[email protected]>
>
> :040000 040000 ecab084beb95987f3e4ead8b61ce19cc052a5fa3 4c1364a6fd511b6dc6ddec06d787bcf105687835 M arch
> :040000 040000 0956f28cde32bd7494d7a87e2814bcd726547a32 0d2e2b611b007085e5a0994a66fd9c0a873ac8f8 M drivers
>
> ====== on console =======
> sym0: <875> rev 0x26 at pci 0000:01:02.0 irq 30
> sym0: Symbios NVRAM, ID 7, Fast-20, SE, parity checking
> sym0: open drain IRQ line driver, using on-chip SRAM
> sym0: using LOAD/STORE-based firmware.
> sym0: SCSI BUS has been reset.
> scsi0 : sym-2.2.0
> scsi 0:0:0:0 ABORT operation started.
> scsi 0:0:0:0 ABORT operation timed-out.
> scsi 0:0:0:0 DEVICE RESET operation started.
> scsi 0:0:0:0 DEVICE RESET operation timed-out.
> scsi 0:0:0:0 BUS RESET operation started.
> scsi 0:0:0:0 BUS RESET operation timed-out.
> ....
Output from kernel with CONFIG_PCI_DEBUG could be useful.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
