Re: [2/2] Driver for the Maxim DS1WM, a 1-wire bus master ASIC core.

[Matt Reimer <mreimer@vpop.net>]

On Apr 25, 2007, at 5:46 PM, Andrew Morton wrote:

> On Tue, 24 Apr 2007 14:02:03 +0400 Evgeniy Polyakov  
> <johnpol@2ka.mipt.ru> wrote:
>
> > +#define DS1WM_CMD_1W_RESET  1 << 0	/* force reset on 1-wire bus */
> > +#define DS1WM_CMD_SRA	    1 << 1	/* enable Search ROM accelerator  
> > mode */
> > +#define DS1WM_CMD_DQ_OUTPUT 1 << 2	/* write only - forces bus low */
> > +#define DS1WM_CMD_DQ_INPUT  1 << 3	/* read only - reflects state  
> > of bus */
> > +
> > +#define DS1WM_INT_PD	    1 << 0	/* presence detect */
> > +#define DS1WM_INT_PDR	    1 << 1	/* presence detect result */
> > +#define DS1WM_INT_TBE	    1 << 2	/* tx buffer empty */
> > +#define DS1WM_INT_TSRE	    1 << 3	/* tx shift register empty */
> > +#define DS1WM_INT_RBF	    1 << 4	/* rx buffer full */
> > +#define DS1WM_INT_RSRF	    1 << 5	/* rx shift register full */
> > +
> > +#define DS1WM_INTEN_EPD	    1 << 0	/* enable presence detect int */
> > +#define DS1WM_INTEN_IAS	    1 << 1	/* INTR active state */
> > +#define DS1WM_INTEN_ETBE    1 << 2	/* enable tx buffer empty int */
> > +#define DS1WM_INTEN_ETMT    1 << 3	/* enable tx shift register  
> > empty int */
> > +#define DS1WM_INTEN_ERBF    1 << 4	/* enable rx buffer full int */
> > +#define DS1WM_INTEN_ERSRF   1 << 5	/* enable rx shift register  
> > full int */
> > +#define DS1WM_INTEN_DQO	    1 << 6	/* enable direct bus driving ops
> > +					   (undocumented), Szabolcs Gyurko */
>
> These macros are very dangerous - please parenthesise them all.

(and several other helpful suggestions...)

Thanks for your review Andrew. I made all the code changes you  
suggested in the attached patch.

Matt

Attachment: 0001-w1-driver-for-Maxim-DS1WM.patch
Description: Binary data