Re: [ALSA] 2.6.21 loading of module snd_ymfpci takes 2 minutes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



At Thu, 26 Apr 2007 12:12:48 +0200,
Santiago Garcia Mantinan wrote:
> 
> I have just upgraded from 2.6.20 to 2.6.21, when I rebooted I thought the
> computer had halted after loading snd_ymfpci, but what happens is that it
> takes 2 minutes (120 seconds mesured with time) for the driver to load, but
> then works as expected.
> 
> After making a diff between the 2.6.20 and 2.6.21 versions of the ymfpci
> driver I decided to replace the ymfpci_main.c from 2.6.21 with the one from
> 2.6.20, it compiled with a few warnings and then worked ok, like it used to
> work, without the two minutes delay.

It's because the recent ymfpci driver tries to request_firmware() at
first.  And since no files are found, it just waits for certain time.
A workaround is to install the firmware files from alsa-firmware
1.0.14rc* package.

I'll fix the codes on 2.6.22 not to make external firmwares
mandatory via Kconfig option.


Takashi

> These are the messages I get from the kernel when I load the driver:
> PCI: Enabling device 0000:00:0a.0 (0000 -> 0002)
> ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9
> 
> This is the info I got for the sound card, which is integrated on the
> motherboard:
> 
> Card: Yamaha DS-1L (YMF740C)
> Chip: Asahi Kasei AK4543
> 
> lspci:
> 00:0a.0 0401: 1073:000c (rev 03)
>         Subsystem: 1033:804b
>         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+
>         Latency: 64 (1250ns min, 6250ns max)
>         Interrupt: pin A routed to IRQ 9
>         Region 0: Memory at e8108000 (32-bit, non-prefetchable) [size=32K]
>         Capabilities: <access denied>
> 
> /proc/asound/cards:
>  0 [YMF740C        ]: YMF740C - Yamaha DS-1L (YMF740C)
>                       Yamaha DS-1L (YMF740C) at 0xe8108000, irq 9
> 
> Hope that helps to diagnose the problem, if you need any other info don't
> hesitate to contact me.
> 
> Regards...
> -- 
> Santiago García Mantiñán
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
> 
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux