Update the AFS fs documentation.
Signed-Off-By: David Howells <[email protected]>
---
Documentation/filesystems/afs.txt | 214 +++++++++++++++++++++++++++----------
1 files changed, 154 insertions(+), 60 deletions(-)
diff --git a/Documentation/filesystems/afs.txt b/Documentation/filesystems/afs.txt
index 2f4237d..12ad6c7 100644
--- a/Documentation/filesystems/afs.txt
+++ b/Documentation/filesystems/afs.txt
@@ -1,31 +1,82 @@
+ ====================
kAFS: AFS FILESYSTEM
====================
-ABOUT
-=====
+Contents:
+
+ - Overview.
+ - Usage.
+ - Mountpoints.
+ - Proc filesystem.
+ - The cell database.
+ - Security.
+ - Examples.
+
+
+========
+OVERVIEW
+========
-This filesystem provides a fairly simple AFS filesystem driver. It is under
-development and only provides very basic facilities. It does not yet support
-the following AFS features:
+This filesystem provides a fairly simple secure AFS filesystem driver. It is
+under development and does not yet provide the full feature set. The features
+it does support include:
- (*) Write support.
- (*) Communications security.
- (*) Local caching.
- (*) pioctl() system call.
- (*) Automatic mounting of embedded mountpoints.
+ (*) Security (currently only AFS kaserver and KerberosIV tickets).
+ (*) File reading.
+ (*) Automounting.
+
+It does not yet support the following AFS features:
+
+ (*) Write support.
+
+ (*) Local caching.
+
+ (*) pioctl() system call.
+
+
+===========
+COMPILATION
+===========
+
+The filesystem should be enabled by turning on the kernel configuration
+options:
+
+ CONFIG_AF_RXRPC - The RxRPC protocol transport
+ CONFIG_RXKAD - The RxRPC Kerberos security handler
+ CONFIG_AFS - The AFS filesystem
+
+Additionally, the following can be turned on to aid debugging:
+
+ CONFIG_AF_RXRPC_DEBUG - Permit AF_RXRPC debugging to be enabled
+ CONFIG_AFS_DEBUG - Permit AFS debugging to be enabled
+
+They permit the debugging messages to be turned on dynamically by manipulating
+the masks in the following files:
+
+ /sys/module/af_rxrpc/parameters/debug
+ /sys/module/afs/parameters/debug
+
+
+=====
USAGE
=====
When inserting the driver modules the root cell must be specified along with a
list of volume location server IP addresses:
- insmod rxrpc.o
+ insmod af_rxrpc.o
+ insmod rxkad.o
insmod kafs.o rootcell=cambridge.redhat.com:172.16.18.73:172.16.18.91
-The first module is a driver for the RxRPC remote operation protocol, and the
-second is the actual filesystem driver for the AFS filesystem.
+The first module is the AF_RXRPC network protocol driver. This provides the
+RxRPC remote operation protocol and may also be accessed from userspace. See:
+
+ Documentation/networking/rxrpc.txt
+
+The second module is the kerberos RxRPC security driver, and the third module
+is the actual filesystem driver for the AFS filesystem.
Once the module has been loaded, more modules can be added by the following
procedure:
@@ -33,7 +84,7 @@ procedure:
echo add grand.central.org 18.7.14.88:128.2.191.224 >/proc/fs/afs/cells
Where the parameters to the "add" command are the name of a cell and a list of
-volume location servers within that cell.
+volume location servers within that cell, with the latter separated by colons.
Filesystems can be mounted anywhere by commands similar to the following:
@@ -42,11 +93,6 @@ Filesystems can be mounted anywhere by commands similar to the following:
mount -t afs "#root.afs." /afs
mount -t afs "#root.cell." /afs/cambridge
- NB: When using this on Linux 2.4, the mount command has to be different,
- since the filesystem doesn't have access to the device name argument:
-
- mount -t afs none /afs -ovol="#root.afs."
-
Where the initial character is either a hash or a percent symbol depending on
whether you definitely want a R/W volume (hash) or whether you'd prefer a R/O
volume, but are willing to use a R/W volume instead (percent).
@@ -60,55 +106,66 @@ named volume will be looked up in the cell specified during insmod.
Additional cells can be added through /proc (see later section).
+===========
MOUNTPOINTS
===========
-AFS has a concept of mountpoints. These are specially formatted symbolic links
-(of the same form as the "device name" passed to mount). kAFS presents these
-to the user as directories that have special properties:
+AFS has a concept of mountpoints. In AFS terms, these are specially formatted
+symbolic links (of the same form as the "device name" passed to mount). kAFS
+presents these to the user as directories that have a follow-link capability
+(ie: symbolic link semantics). If anyone attempts to access them, they will
+automatically cause the target volume to be mounted (if possible) on that site.
- (*) They cannot be listed. Running a program like "ls" on them will incur an
- EREMOTE error (Object is remote).
+Automatically mounted filesystems will be automatically unmounted approximately
+twenty minutes after they were last used. Alternatively they can be unmounted
+directly with the umount() system call.
- (*) Other objects can't be looked up inside of them. This also incurs an
- EREMOTE error.
+Manually unmounting an AFS volume will cause any idle submounts upon it to be
+culled first. If all are culled, then the requested volume will also be
+unmounted, otherwise error EBUSY will be returned.
- (*) They can be queried with the readlink() system call, which will return
- the name of the mountpoint to which they point. The "readlink" program
- will also work.
+This can be used by the administrator to attempt to unmount the whole AFS tree
+mounted on /afs in one go by doing:
- (*) They can be mounted on (which symbolic links can't).
+ umount /afs
+===============
PROC FILESYSTEM
===============
-The rxrpc module creates a number of files in various places in the /proc
-filesystem:
-
- (*) Firstly, some information files are made available in a directory called
- "/proc/net/rxrpc/". These list the extant transport endpoint, peer,
- connection and call records.
-
- (*) Secondly, some control files are made available in a directory called
- "/proc/sys/rxrpc/". Currently, all these files can be used for is to
- turn on various levels of tracing.
-
The AFS modules creates a "/proc/fs/afs/" directory and populates it:
- (*) A "cells" file that lists cells currently known to the afs module.
+ (*) A "cells" file that lists cells currently known to the afs module and
+ their usage counts:
+
+ [root@andromeda ~]# cat /proc/fs/afs/cells
+ USE NAME
+ 3 cambridge.redhat.com
(*) A directory per cell that contains files that list volume location
servers, volumes, and active servers known within that cell.
+ [root@andromeda ~]# cat /proc/fs/afs/cambridge.redhat.com/servers
+ USE ADDR STATE
+ 4 172.16.18.91 0
+ [root@andromeda ~]# cat /proc/fs/afs/cambridge.redhat.com/vlservers
+ ADDRESS
+ 172.16.18.91
+ [root@andromeda ~]# cat /proc/fs/afs/cambridge.redhat.com/volumes
+ USE STT VLID[0] VLID[1] VLID[2] NAME
+ 1 Val 20000000 20000001 20000002 root.afs
+
+=================
THE CELL DATABASE
=================
-The filesystem maintains an internal database of all the cells it knows and
-the IP addresses of the volume location servers for those cells. The cell to
-which the computer belongs is added to the database when insmod is performed
-by the "rootcell=" argument.
+The filesystem maintains an internal database of all the cells it knows and the
+IP addresses of the volume location servers for those cells. The cell to which
+the system belongs is added to the database when insmod is performed by the
+"rootcell=" argument or, if compiled in, using a "kafs.rootcell=" argument on
+the kernel command line.
Further cells can be added by commands similar to the following:
@@ -118,20 +175,65 @@ Further cells can be added by commands similar to the following:
No other cell database operations are available at this time.
+========
+SECURITY
+========
+
+Secure operations are initiated by acquiring a key using the klog program. A
+very primitive klog program is available at:
+
+ http://people.redhat.com/~dhowells/rxrpc/klog.c
+
+This should be compiled by:
+
+ make klog LDLIBS="-lcrypto -lcrypt -lkrb4 -lkeyutils"
+
+And then run as:
+
+ ./klog
+
+Assuming it's successful, this adds a key of type RxRPC, named for the service
+and cell, eg: "afs@<cellname>". This can be viewed with the keyctl program or
+by cat'ing /proc/keys:
+
+ [root@andromeda ~]# keyctl show
+ Session Keyring
+ -3 --alswrv 0 0 keyring: _ses.3268
+ 2 --alswrv 0 0 \_ keyring: _uid.0
+ 111416553 --als--v 0 0 \_ rxrpc: [email protected]
+
+Currently the username, realm, password and proposed ticket lifetime are
+compiled in to the program.
+
+It is not required to acquire a key before using AFS facilities, but if one is
+not acquired then all operations will be governed by the anonymous user parts
+of the ACLs.
+
+If a key is acquired, then all AFS operations, including mounts and automounts,
+made by a possessor of that key will be secured with that key.
+
+If a file is opened with a particular key and then the file descriptor is
+passed to a process that doesn't have that key (perhaps over an AF_UNIX
+socket), then the operations on the file will be made with key that was used to
+open the file.
+
+
+========
EXAMPLES
========
-Here's what I use to test this. Some of the names and IP addresses are local
-to my internal DNS. My "root.afs" partition has a mount point within it for
+Here's what I use to test this. Some of the names and IP addresses are local
+to my internal DNS. My "root.afs" partition has a mount point within it for
some public volumes volumes.
-insmod -S /tmp/rxrpc.o
-insmod -S /tmp/kafs.o rootcell=cambridge.redhat.com:172.16.18.73:172.16.18.91
+insmod /tmp/rxrpc.o
+insmod /tmp/rxkad.o
+insmod /tmp/kafs.o rootcell=cambridge.redhat.com:172.16.18.91
mount -t afs \%root.afs. /afs
mount -t afs \%cambridge.redhat.com:root.cell. /afs/cambridge.redhat.com/
-echo add grand.central.org 18.7.14.88:128.2.191.224 > /proc/fs/afs/cells
+echo add grand.central.org 18.7.14.88:128.2.191.224 > /proc/fs/afs/cells
mount -t afs "#grand.central.org:root.cell." /afs/grand.central.org/
mount -t afs "#grand.central.org:root.archive." /afs/grand.central.org/archive
mount -t afs "#grand.central.org:root.contrib." /afs/grand.central.org/contrib
@@ -141,15 +243,7 @@ mount -t afs "#grand.central.org:root.service." /afs/grand.central.org/service
mount -t afs "#grand.central.org:root.software." /afs/grand.central.org/software
mount -t afs "#grand.central.org:root.user." /afs/grand.central.org/user
-umount /afs/grand.central.org/user
-umount /afs/grand.central.org/software
-umount /afs/grand.central.org/service
-umount /afs/grand.central.org/project
-umount /afs/grand.central.org/doc
-umount /afs/grand.central.org/contrib
-umount /afs/grand.central.org/archive
-umount /afs/grand.central.org
-umount /afs/cambridge.redhat.com
umount /afs
rmmod kafs
+rmmod rxkad
rmmod rxrpc
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
