the hdaps driver uses a semaphore as mutex. use the mutex API
instead of the (binary) semaphore
Signed-off-by: Matthias Kaehlcke <[email protected]>
--
diff --git a/drivers/hwmon/hdaps.c b/drivers/hwmon/hdaps.c
index bf759ea..f8e4952 100644
--- a/drivers/hwmon/hdaps.c
+++ b/drivers/hwmon/hdaps.c
@@ -71,10 +71,10 @@ static u8 km_activity;
static int rest_x;
static int rest_y;
-static DECLARE_MUTEX(hdaps_sem);
+static DEFINE_MUTEX(hdaps_mtx);
/*
- * __get_latch - Get the value from a given port. Callers must hold hdaps_sem.
+ * __get_latch - Get the value from a given port. Callers must hold hdaps_mtx.
*/
static inline u8 __get_latch(u16 port)
{
@@ -83,7 +83,7 @@ static inline u8 __get_latch(u16 port)
/*
* __check_latch - Check a port latch for a given value. Returns zero if the
- * port contains the given value. Callers must hold hdaps_sem.
+ * port contains the given value. Callers must hold hdaps_mtx.
*/
static inline int __check_latch(u16 port, u8 val)
{
@@ -94,7 +94,7 @@ static inline int __check_latch(u16 port, u8 val)
/*
* __wait_latch - Wait up to 100us for a port latch to get a certain value,
- * returning zero if the value is obtained. Callers must hold hdaps_sem.
+ * returning zero if the value is obtained. Callers must hold hdaps_mtx.
*/
static int __wait_latch(u16 port, u8 val)
{
@@ -111,7 +111,7 @@ static int __wait_latch(u16 port, u8 val)
/*
* __device_refresh - request a refresh from the accelerometer. Does not wait
- * for refresh to complete. Callers must hold hdaps_sem.
+ * for refresh to complete. Callers must hold hdaps_mtx.
*/
static void __device_refresh(void)
{
@@ -125,7 +125,7 @@ static void __device_refresh(void)
/*
* __device_refresh_sync - request a synchronous refresh from the
* accelerometer. We wait for the refresh to complete. Returns zero if
- * successful and nonzero on error. Callers must hold hdaps_sem.
+ * successful and nonzero on error. Callers must hold hdaps_mtx.
*/
static int __device_refresh_sync(void)
{
@@ -135,7 +135,7 @@ static int __device_refresh_sync(void)
/*
* __device_complete - indicate to the accelerometer that we are done reading
- * data, and then initiate an async refresh. Callers must hold hdaps_sem.
+ * data, and then initiate an async refresh. Callers must hold hdaps_mtx.
*/
static inline void __device_complete(void)
{
@@ -153,7 +153,7 @@ static int hdaps_readb_one(unsigned int port, u8 *val)
{
int ret;
- down(&hdaps_sem);
+ mutex_lock(&hdaps_mtx);
/* do a sync refresh -- we need to be sure that we read fresh data */
ret = __device_refresh_sync();
@@ -164,7 +164,7 @@ static int hdaps_readb_one(unsigned int port, u8 *val)
__device_complete();
out:
- up(&hdaps_sem);
+ mutex_unlock(&hdaps_mtx);
return ret;
}
@@ -199,9 +199,9 @@ static int hdaps_read_pair(unsigned int port1, unsigned int port2,
{
int ret;
- down(&hdaps_sem);
+ mutex_lock(&hdaps_mtx);
ret = __hdaps_read_pair(port1, port2, val1, val2);
- up(&hdaps_sem);
+ mutex_unlock(&hdaps_mtx);
return ret;
}
@@ -214,7 +214,7 @@ static int hdaps_device_init(void)
{
int total, ret = -ENXIO;
- down(&hdaps_sem);
+ mutex_lock(&hdaps_mtx);
outb(0x13, 0x1610);
outb(0x01, 0x161f);
@@ -280,7 +280,7 @@ static int hdaps_device_init(void)
}
out:
- up(&hdaps_sem);
+ mutex_unlock(&hdaps_mtx);
return ret;
}
@@ -314,7 +314,7 @@ static struct platform_driver hdaps_driver = {
};
/*
- * hdaps_calibrate - Set our "resting" values. Callers must hold hdaps_sem.
+ * hdaps_calibrate - Set our "resting" values. Callers must hold hdaps_mtx.
*/
static void hdaps_calibrate(void)
{
@@ -326,7 +326,7 @@ static void hdaps_mousedev_poll(unsigned long unused)
int x, y;
/* Cannot sleep. Try nonblockingly. If we fail, try again later. */
- if (down_trylock(&hdaps_sem)) {
+ if (mutex_trylock(&hdaps_mtx)) {
mod_timer(&hdaps_timer,jiffies + HDAPS_POLL_PERIOD);
return;
}
@@ -341,7 +341,7 @@ static void hdaps_mousedev_poll(unsigned long unused)
mod_timer(&hdaps_timer, jiffies + HDAPS_POLL_PERIOD);
out:
- up(&hdaps_sem);
+ mutex_unlock(&hdaps_mtx);
}
@@ -421,9 +421,9 @@ static ssize_t hdaps_calibrate_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
- down(&hdaps_sem);
+ mutex_lock(&hdaps_mtx);
hdaps_calibrate();
- up(&hdaps_sem);
+ mutex_unlock(&hdaps_mtx);
return count;
}
--
Matthias Kaehlcke
Linux Application Developer
Barcelona
The salvation of mankind lies only in making everything the concern of all
(Alexander Solzhenitsyn)
.''`.
using free software / Debian GNU/Linux | http://debian.org : :' :
`. `'`
gpg --keyserver pgp.mit.edu --recv-keys 47D8E5D4 `-
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
