Re: SATA errors/messages after upgrade to 2.6.20.7

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



[email protected] wrote:

It is a Samsung HD501LJ SATA drive connected to 631xESB/632xESB controller.
Reading and writing every block of the drive does not generate any other
errors/failures. This is observed in 2.6.20.7 like a clockwork on any
badblocks -v run or rebuild of a MD raid1 array onto the disk.
It, however, was not observed on 2.6.18 in 182 badblocks -v runs followed by
rebuild of MD raid1 array.

Any idea what it might be?

Apr 23 14:45:34 stdsrv-x86-64bit kernel: ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
Apr 23 14:45:34 stdsrv-x86-64bit kernel: ata4.00: (irq_stat 0x40000008)
Apr 23 14:45:34 stdsrv-x86-64bit kernel: ata4.00: cmd 60/80:00:14:16:c4/00:00:05:00:00/40 tag 0 cdb 0x0 data 65536 in
Apr 23 14:45:34 stdsrv-x86-64bit kernel:          res 51/40:00:40:16:c4/6f:00:05:00:00/40 Emask 0x9 (media error)

Does 'smartctl -d ata -t long /dev/XXXXX' return errors?

Media error is typically just that...

	Jeff



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux