[PATCH 6/6] [RFC]mlx4 build system stuff

[Roland Dreier <rolandd@cisco.com>]

Hook up mlx4_core and mlx4_ib drivers to Kconfig and Makefiles.

Signed-off-by: Roland Dreier <rolandd@cisco.com>

---

 infiniband/Kconfig          |    2 ++
 infiniband/Makefile         |    1 +
 infiniband/hw/mlx4/Kconfig  |    9 +++++++++
 infiniband/hw/mlx4/Makefile |    3 +++
 net/Kconfig                 |   14 ++++++++++++++
 net/Makefile                |    1 +
 net/mlx4/Makefile           |    4 ++++
 7 files changed, 34 insertions(+)

diff --git a/drivers/infiniband/Kconfig b/drivers/infiniband/Kconfig
index 82afba5..37deaae 100644
--- a/drivers/infiniband/Kconfig
+++ b/drivers/infiniband/Kconfig
@@ -45,6 +45,8 @@ source "drivers/infiniband/hw/ehca/Kconfig"
 source "drivers/infiniband/hw/amso1100/Kconfig"
 source "drivers/infiniband/hw/cxgb3/Kconfig"
 
+source "drivers/infiniband/hw/mlx4/Kconfig"
+
 source "drivers/infiniband/ulp/ipoib/Kconfig"
 
 source "drivers/infiniband/ulp/srp/Kconfig"
diff --git a/drivers/infiniband/Makefile b/drivers/infiniband/Makefile
index da2066c..75f325e 100644
--- a/drivers/infiniband/Makefile
+++ b/drivers/infiniband/Makefile
@@ -4,6 +4,7 @@ obj-$(CONFIG_INFINIBAND_IPATH)		+= hw/ipath/
 obj-$(CONFIG_INFINIBAND_EHCA)		+= hw/ehca/
 obj-$(CONFIG_INFINIBAND_AMSO1100)	+= hw/amso1100/
 obj-$(CONFIG_INFINIBAND_CXGB3)		+= hw/cxgb3/
+obj-$(CONFIG_MLX4_INFINIBAND)		+= hw/mlx4/
 obj-$(CONFIG_INFINIBAND_IPOIB)		+= ulp/ipoib/
 obj-$(CONFIG_INFINIBAND_SRP)		+= ulp/srp/
 obj-$(CONFIG_INFINIBAND_ISER)		+= ulp/iser/
diff --git a/drivers/infiniband/hw/mlx4/Kconfig b/drivers/infiniband/hw/mlx4/Kconfig
new file mode 100644
index 0000000..b8912cd
--- /dev/null
+++ b/drivers/infiniband/hw/mlx4/Kconfig
@@ -0,0 +1,9 @@
+config MLX4_INFINIBAND
+	tristate "Mellanox ConnectX HCA support"
+	depends on INFINIBAND
+	select MLX4_CORE
+	---help---
+	  This driver provides low-level InfiniBand support for
+	  Mellanox ConnectX PCI Express host channel adapters (HCAs).
+	  This is required to use InfiniBand protocols such as
+	  IP-over-IB or SRP with these devices.
diff --git a/drivers/infiniband/hw/mlx4/Makefile b/drivers/infiniband/hw/mlx4/Makefile
new file mode 100644
index 0000000..70f09c7
--- /dev/null
+++ b/drivers/infiniband/hw/mlx4/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_MLX4_INFINIBAND)	+= mlx4_ib.o
+
+mlx4_ib-y :=	ah.o cq.o doorbell.o mad.o main.o mr.o qp.o srq.o
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index c3f9f59..842f020 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2493,6 +2493,20 @@ config PASEMI_MAC
 	  This driver supports the on-chip 1/10Gbit Ethernet controller on
 	  PA Semi's PWRficient line of chips.
 
+config MLX4_CORE
+	tristate
+	depends on PCI
+	default n
+
+config MLX4_DEBUG
+	bool "Verbose debugging output" if (MLX4_CORE && EMBEDDED)
+	default y
+	---help---
+	  This option causes debugging code to be compiled into the
+	  mlx4_core driver.  The output can be turned on via the
+	  debug_level module parameter (which can also be set after
+	  the driver is loaded through sysfs).
+
 endmenu
 
 source "drivers/net/tokenring/Kconfig"
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 33af833..1604e1a 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -197,6 +197,7 @@ obj-$(CONFIG_SMC911X) += smc911x.o
 obj-$(CONFIG_DM9000) += dm9000.o
 obj-$(CONFIG_FEC_8XX) += fec_8xx/
 obj-$(CONFIG_PASEMI_MAC) += pasemi_mac.o
+obj-$(CONFIG_MLX4_CORE) += mlx4/
 
 obj-$(CONFIG_MACB) += macb.o
 
diff --git a/drivers/net/mlx4/Makefile b/drivers/net/mlx4/Makefile
new file mode 100644
index 0000000..4f18889
--- /dev/null
+++ b/drivers/net/mlx4/Makefile
@@ -0,0 +1,4 @@
+obj-$(CONFIG_MLX4_CORE)		+= mlx4_core.o
+
+mlx4_core-y :=	alloc.o cmd.o cq.o eq.o fw.o icm.o intf.o main.o mcg.o mr.o \
+		pd.o profile.o qp.o reset.o srq.o
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/