Re: [PATCH] dvb_en_50221: Convert to kthread API

[Christoph Hellwig <hch@infradead.org>]

On Thu, Apr 19, 2007 at 03:34:13PM -0700, Andrew Morton wrote:
> On Thu, 19 Apr 2007 01:59:04 -0600
> "Eric W. Biederman" <ebiederm@xmission.com> wrote:
> 
> > This patch is a minimal transformation to use the kthread API
> > doing it's best to preserve the existing logic.
> > 
> > Instead of starting kdvb-ca by calling kernel_thread,
> > daemonize and sigfillset we kthread_run is used.
> > 
> > Instead of tracking the pid of the running thread we instead
> > simply keep a flag to indicate that the current thread is
> > running, as that is all the pid is really used for.
> > 
> > And finally the kill_proc sending signal 0 to the kernel thread to
> > ensure it is alive before we wait for it to shutdown is removed.
> > The kthread API does not provide the pid so we don't have that
> > information readily available and the test is just silly.  If there
> > is no shutdown race the test is a useless confirmation of that the
> > thread is running.  If there is a race the test doesn't fix it and
> > we should fix the race properly.
> 
> urgh, yes, this is just sad.  We should convert this driver fully to
> the kthread API - it will end up much better.
> 
> I'll queue this up as a -mm-only thing as a gentle reminder that
> we should do it properly.

Here's an attempted update to the full kthread API + wake_up_process:


Index: linux-2.6/drivers/media/dvb/dvb-core/dvb_ca_en50221.c
===================================================================
--- linux-2.6.orig/drivers/media/dvb/dvb-core/dvb_ca_en50221.c	2007-04-20 07:25:07.000000000 +0200
+++ linux-2.6/drivers/media/dvb/dvb-core/dvb_ca_en50221.c	2007-04-20 07:35:54.000000000 +0200
@@ -37,6 +37,7 @@
 #include <linux/delay.h>
 #include <linux/spinlock.h>
 #include <linux/sched.h>
+#include <linux/kthread.h>
 
 #include "dvb_ca_en50221.h"
 #include "dvb_ringbuffer.h"
@@ -140,13 +141,7 @@ struct dvb_ca_private {
 	wait_queue_head_t wait_queue;
 
 	/* PID of the monitoring thread */
-	pid_t thread_pid;
-
-	/* Wait queue used when shutting thread down */
-	wait_queue_head_t thread_queue;
-
-	/* Flag indicating when thread should exit */
-	unsigned int exit:1;
+	struct task_struct *thread;
 
 	/* Flag indicating if the CA device is open */
 	unsigned int open:1;
@@ -902,28 +897,10 @@ static void dvb_ca_en50221_thread_wakeup
 
 	ca->wakeup = 1;
 	mb();
-	wake_up_interruptible(&ca->thread_queue);
+	wake_up_process(ca->thread);
 }
 
 /**
- * Used by the CA thread to determine if an early wakeup is necessary
- *
- * @param ca CA instance.
- */
-static int dvb_ca_en50221_thread_should_wakeup(struct dvb_ca_private *ca)
-{
-	if (ca->wakeup) {
-		ca->wakeup = 0;
-		return 1;
-	}
-	if (ca->exit)
-		return 1;
-
-	return 0;
-}
-
-
-/**
  * Update the delay used by the thread.
  *
  * @param ca CA instance.
@@ -982,7 +959,6 @@ static void dvb_ca_en50221_thread_update
 static int dvb_ca_en50221_thread(void *data)
 {
 	struct dvb_ca_private *ca = data;
-	char name[15];
 	int slot;
 	int flags;
 	int status;
@@ -991,28 +967,17 @@ static int dvb_ca_en50221_thread(void *d
 
 	dprintk("%s\n", __FUNCTION__);
 
-	/* setup kernel thread */
-	snprintf(name, sizeof(name), "kdvb-ca-%i:%i", ca->dvbdev->adapter->num, ca->dvbdev->id);
-
-	lock_kernel();
-	daemonize(name);
-	sigfillset(&current->blocked);
-	unlock_kernel();
-
 	/* choose the correct initial delay */
 	dvb_ca_en50221_thread_update_delay(ca);
 
 	/* main loop */
-	while (!ca->exit) {
+	while (!kthread_should_stop()) {
 		/* sleep for a bit */
-		if (!ca->wakeup) {
-			flags = wait_event_interruptible_timeout(ca->thread_queue,
-								 dvb_ca_en50221_thread_should_wakeup(ca),
-								 ca->delay);
-			if ((flags == -ERESTARTSYS) || ca->exit) {
-				/* got signal or quitting */
-				break;
-			}
+		while (!ca->wakeup) {
+			set_current_state(TASK_INTERRUPTIBLE);
+			schedule_timeout(ca->delay);
+			if (kthread_should_stop())
+				return 0;
 		}
 		ca->wakeup = 0;
 
@@ -1181,10 +1146,6 @@ static int dvb_ca_en50221_thread(void *d
 		}
 	}
 
-	/* completed */
-	ca->thread_pid = 0;
-	mb();
-	wake_up_interruptible(&ca->thread_queue);
 	return 0;
 }
 
@@ -1682,9 +1643,6 @@ int dvb_ca_en50221_init(struct dvb_adapt
 		goto error;
 	}
 	init_waitqueue_head(&ca->wait_queue);
-	ca->thread_pid = 0;
-	init_waitqueue_head(&ca->thread_queue);
-	ca->exit = 0;
 	ca->open = 0;
 	ca->wakeup = 0;
 	ca->next_read_slot = 0;
@@ -1710,14 +1668,14 @@ int dvb_ca_en50221_init(struct dvb_adapt
 	mb();
 
 	/* create a kthread for monitoring this CA device */
-
-	ret = kernel_thread(dvb_ca_en50221_thread, ca, 0);
-
-	if (ret < 0) {
-		printk("dvb_ca_init: failed to start kernel_thread (%d)\n", ret);
+	ca->thread = kthread_run(dvb_ca_en50221_thread, ca, "kdvb-ca-%i:%i",
+				 ca->dvbdev->adapter->num, ca->dvbdev->id);
+	if (IS_ERR(ca->thread)) {
+		ret = PTR_ERR(ca->thread);
+		printk("dvb_ca_init: failed to start kernel_thread (%d)\n",
+			ret);
 		goto error;
 	}
-	ca->thread_pid = ret;
 	return 0;
 
 error:
@@ -1748,17 +1706,7 @@ void dvb_ca_en50221_release(struct dvb_c
 	dprintk("%s\n", __FUNCTION__);
 
 	/* shutdown the thread if there was one */
-	if (ca->thread_pid) {
-		if (kill_proc(ca->thread_pid, 0, 1) == -ESRCH) {
-			printk("dvb_ca_release adapter %d: thread PID %d already died\n",
-			       ca->dvbdev->adapter->num, ca->thread_pid);
-		} else {
-			ca->exit = 1;
-			mb();
-			dvb_ca_en50221_thread_wakeup(ca);
-			wait_event_interruptible(ca->thread_queue, ca->thread_pid == 0);
-		}
-	}
+	kthread_stop(ca->thread);
 
 	for (i = 0; i < ca->slot_count; i++) {
 		dvb_ca_en50221_slot_shutdown(ca, i);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/