On Thu, Apr 19, 2007 at 10:02:36AM -0400, James Bottomley wrote:
> On Thu, 2007-04-19 at 09:25 -0400, Josef Bacik wrote:
> > Looking through everything I came to the conclusion that we don't really need
> > the scsi_sysfs_add_devices in scsi_finish_async_scan, which gets run everytime
> > we do a do_scan_async. In doing the scanning, if we come upon anything we will
> > already be registering the device with sysfs so the scsi_sysfs_add_devices step
> > is kind of useless.
>
> Unfortunately, it isn't. The registration step while scanning is at the
> end of scsi_add_lun():
>
>
> if (!async && scsi_sysfs_add_sdev(sdev) != 0)
> return SCSI_SCAN_NO_RESPONSE;
>
> return SCSI_SCAN_LUN_PRESENT;
>
> The !async should mean that the addition *only* occurs for the non async
> scan case ... if you remove the post async scan add, we'll lose devices.
>
> > I tested this and it worked fine on my UP box (where the
> > problem was happening) and my SMP box (where the problem wasn't happening). Now
> > I'm not entirely sure if this is correct, but I'm attaching the patch that I
> > used to fix it for me, please point out if I've done something wrong or if there
> > is a different way this needs to be fixed. Thank you,
>
> Could you add some debugging first to see if we're actually adding the
> device twice (and also, if we are, what the value of the async is).
>
Sorry I should have put that in the original post, I added debugging to
kobject_add to check to see if we were adding something twice, thats how I
figured out who was doing it
kobject rport-3:0-0: registering. parent: host3, set: devices
kobject rport-3:0-0: registering. parent: fc_remote_ports, set: class_obj
kobject target3:0:0: registering. parent: rport-3:0-0, set: devices
kobject rport-3:0-1: registering. parent: host3, set: devices
kobject rport-3:0-1: registering. parent: fc_remote_ports, set: class_obj
kobject target3:0:0: registering. parent: fc_transport, set: class_obj
kobject rport-3:0-2: registering. parent: host3, set: devices
kobject rport-3:0-2: registering. parent: fc_remote_ports, set: class_obj
kobject rport-3:0-3: registering. parent: host3, set: devices
kobject rport-3:0-3: registering. parent: fc_remote_ports, set: class_obj
kobject rport-3:0-4: registering. parent: host3, set: devices
kobject rport-3:0-4: registering. parent: fc_remote_ports, set: class_obj
kobject rport-3:0-5: registering. parent: host3, set: devices
kobject rport-3:0-5: registering. parent: fc_remote_ports, set: class_obj
kobject rport-3:0-6: registering. parent: host3, set: devices
kobject rport-3:0-6: registering. parent: fc_remote_ports, set: class_obj
kobject rport-3:0-7: registering. parent: host3, set: devices
kobject rport-3:0-7: registering. parent: fc_remote_ports, set: class_obj
>> kobject 3:0:0:0: registering. parent: target3:0:0, set: devices
kobject 3:0:0:0: registering. parent: scsi_device, set: class_obj
scsi 3:0:0:0: Direct-Access IBM 1742-900 0520 PQ: 0 ANSI: 3
>> kobject 3:0:0:0: registering. parent: target3:0:0, set: devices
kobject_add failed for 3:0:0:0 with -EEXIST, don't try to register things with
the same name in the same directory.
Async in the first case is set and in the second case it isn't set. Thank you,
Josef
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
