On Wednesday 18 April 2007, Tejun Heo wrote:
> Mark Lord wrote:
> > Chuck Ebbert wrote:
> >> Mark Lord wrote:
> >>> I'll patch it locally on my own machines, but what about the tens
> >>> of thousands of other Seagate notebook drive owners out there?
> >>>
> >>
> >> This is a problem with Seagate specifically, spinning back up
> >> on receipt of some command after spindown?
> >
> > No, they just seem to be affected worse by it than some other brands.
> > The bug is that libata/SCSI now spin-down the drive before the distro's
> > scripts are done with it, so it spins down, and then gets spun up again
> > by the distro, and then spun down again by the distro.
> >
> > And along the way, one/both of the two causes a full mechanism "park",
> > which is hard on things if abused (like this).
> >
> > Or at least that's what I recall for it. Tejun?
>
> This really isn't a regression. It's been always like that with libata.
Tejun, it is a regression over IDE subsystem
(so all PATA and some SATA also).
Dave/Chuck, this also seems like a FC7 regression
(because of the libata PATA switch).
> libata doesn't make devices go into standby mode and shutdown(8) does
> it for libata. The problem here is that libata does issue
> SYNCHRONIZE_CACHE on shutdown. So, the sequence of event is...
>
> 1. shutdown(8) issues SYNCHRONIZE_CACHE followed by STANDBY_NOW
> 2. kernel shutdown starts
> 3. libata shutdown issues SYNCHRONIZE_CACHE
> 4. power goes off
>
> Some drives seem to spin up at step #3 even when its cache is clean and
> power goes off right after the disk finishes the command. So, it's
> really bad when it happens - spin down, spin up followed by immediate
> power off.
>
> SCSI part of the fix is queued in scsi-misc-2.6 tree and libata-dev part
> is acked and waiting to be merged, so the fix will be available in
> 2.6.22. However, it's disabled by default to remain compatible with the
> current behavior and requires userland change to fully fix the problem.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]