Re: 2.6.21-rc5 from fc7-rc2 problems

[Len Brown <lenb@kernel.org>]

< Linux version 2.6.20-1.2933.fc6
< (brewbuilder@hs20-bc2-4.build.redhat.com) (gcc version 4.1.1 20070105
< (Red Hat 4.1.1-51)) #1 SMP Mon Mar 19 11:38:26 EDT 2007
---
> Linux version 2.6.20-1.3023.fc7
> (brewbuilder@ls20-bc1-13.build.redhat.com) (gcc version 4.1.2 20070317
> (Red Hat 4.1.2-5)) #1 SMP Sun Mar 25 22:12:02 EDT 2007

I agree that the fc7 version string looks strange, because
there are other things in the fc7 dmesg which are clearly from 2.6.21,
such as this:

< ACPI: Core revision 20060707
---
> ACPI: Core revision 20070126

Perhaps you can try building a kernel.org 2.6.21 kernel and running
it on your FC6 install?

The ALI15X3 stuff exists only in the working FC6 dmesg:

< Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
< ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
< ALI15X3: IDE controller at PCI slot 0000:00:0f.0
< ACPI: Unable to derive IRQ for device 0000:00:0f.0
< ACPI: PCI Interrupt 0000:00:0f.0[A]: no GSI
< ALI15X3: chipset revision 195
< ALI15X3: not 100% native mode: will probe irqs later
<     ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:DMA, hdb:pio
<     ide1: BM-DMA at 0x1008-0x100f, BIOS settings: hdc:DMA, hdd:pio
< Probing IDE interface ide0...
< hda: HITACHI_DK23CA-20, ATA DISK drive
< ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
< Probing IDE interface ide1...
< hdc: MATSHITADVD-ROM SR-8175, ATAPI CD/DVD-ROM drive
< ide1 at 0x170-0x177,0x376 on irq 15
< Probing IDE interface ide2...
< Probing IDE interface ide3...
< Probing IDE interface ide4...
< Probing IDE interface ide5...
< hda: max request size: 128KiB
< hda: 39070080 sectors (20003 MB) w/2048KiB Cache, CHS=38760/16/63, UDMA(66)
< hda: cache flushes not supported
<  hda: hda1 hda2
< ide-floppy driver 0.99.newide

FC7 looks like it is using libata instead:
-Len

> SCSI subsystem initialized
> libata version 2.20 loaded.
> ACPI: Unable to derive IRQ for device 0000:00:0f.0
> ACPI: PCI Interrupt 0000:00:0f.0[A]: no GSI
> ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011000
> irq 14
> ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011008
> irq 15
> scsi0 : pata_ali
> PM: Adding info for No Bus:host0
> ata1.00: ATA-5: HITACHI_DK23CA-20, 00H1A0A3, max UDMA/100   <========
> drive can do 100
> ata1.00: 39070080 sectors, multi 16: LBA
> ata1.00: configured for UDMA/33    <=============== configured as 33
> scsi1 : pata_ali
> PM: Adding info for No Bus:host1
> ata2.00: ATAPI, max UDMA/33   <=== cd can't be read now
> ata2.00: configured for UDMA/33
> PM: Adding info for No Bus:target0:0:0
> scsi 0:0:0:0: Direct-Access     ATA      HITACHI_DK23CA-2 00H1 PQ: 0 ANSI: 5
> PM: Adding info for scsi:0:0:0:0
> PM: Adding info for No Bus:target1:0:0
> ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
> ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x12 data 36 in
>          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> ata2: soft resetting port
> ATA: abnormal status 0xD0 on port 0x00010177
> ata2.00: failed to IDENTIFY (I/O error, err_mask=0x2)
> ata2.00: revalidation failed (errno=-5)
> ata2: failed to recover some devices, retrying in 5 secs
> ata2: port is slow to respond, please be patient (Status 0xd0)
> ata2: port failed to respond (30 secs, Status 0xd0)
> ata2: soft resetting port
> ATA: abnormal status 0xD0 on port 0x00010177
> ata2.00: failed to IDENTIFY (I/O error, err_mask=0x2)
> ata2.00: revalidation failed (errno=-5)
> ata2.00: limiting speed to UDMA/33:PIO3
> ata2: failed to recover some devices, retrying in 5 secs
> ata2: port is slow to respond, please be patient (Status 0xd0)
> ata2: port failed to respond (30 secs, Status 0xd0)
> ata2: soft resetting port
> ATA: abnormal status 0xD0 on port 0x00010177
> ata2.00: failed to IDENTIFY (I/O error, err_mask=0x2)
> ata2.00: revalidation failed (errno=-5)
> ata2.00: disabled
> ata2: EH complete

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/