Re: SATA resume slowness, e1000 MSI warning

["Michael S. Tsirkin" <mst@dev.mellanox.co.il>]

> > > Hmm. pci_save_pcix_state/pci_restore_pcix_state seem to only handle
> > > regular devices and seem to ignore the fact that for bridge PCI-X
> > > capability has a different structure.
> > >
> > > Is this intentional? 
> > 
> > Probably not a such.  I don't think we have any drivers for bridge
> > devices so I don't think it matters.  It likely wouldn't hurt to fix
> > it just in case though.
> > 
> > Do any of the mellanox cards do anything with the bridge on the card?
> 
> Yes but they do their own thing wrt saving/restoring registers.
> Look at drivers/infiniband/hw/mthca/mthca_reset.c
> 
> > > If not, here's a patch to fix this. Warning: completely untested.
> > 
> > If you fix the offsets and diff this against my last fix (to never
> > free the buffer) I think your patch makes sense.
> 
> Let's agree what the correct offsets are.
> 
> > > PCI: restore bridge PCI-X capability registers after PM event
> > >
> > > Restore PCI-X bridge up/downstream capability registers
> > > after PM event.  This includes maxumum split transaction
> > > commitment limit which might be vital for PCI X.
> > >
> > > Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
> > >
> > > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> > > index df49530..4b788ef 100644
> > > --- a/drivers/pci/pci.c
> > > +++ b/drivers/pci/pci.c
> > > @@ -597,14 +597,19 @@ static int pci_save_pcix_state(struct pci_dev *dev)
> > >  	if (pos <= 0)
> > >  		return 0;
> > >  
> > > -	save_state = kzalloc(sizeof(*save_state) + sizeof(u16), GFP_KERNEL);
> > > + save_state = kzalloc(sizeof(*save_state) + sizeof(u16) * 2, GFP_KERNEL);
> > >  	if (!save_state) {
> > > -		dev_err(&dev->dev, "Out of memory in pci_save_pcie_state\n");
> > > +		dev_err(&dev->dev, "Out of memory in pci_save_pcix_state\n");
> > >  		return -ENOMEM;
> > >  	}
> > >  	cap = (u16 *)&save_state->data[0];
> > >  
> > > -	pci_read_config_word(dev, pos + PCI_X_CMD, &cap[i++]);
> > > +	if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
> > 
> > This appears to be the proper test.
> > 
> > > + pci_read_config_word(dev, pos + PCI_X_BRIDGE_UP_SPL_CTL, &cap[i++]);
> > > + pci_read_config_word(dev, pos + PCI_X_BRIDGE_DN_SPL_CTL, &cap[i++]);
> > > +	} else
> > > +		pci_read_config_word(dev, pos + PCI_X_CMD, &cap[i++]);
> > > +
> > >  	pci_add_saved_cap(dev, save_state);
> > >  	return 0;
> > >  }
> > > @@ -621,7 +626,11 @@ static void pci_restore_pcix_state(struct pci_dev *dev)
> > >  		return;
> > >  	cap = (u16 *)&save_state->data[0];
> > >  
> > > -	pci_write_config_word(dev, pos + PCI_X_CMD, cap[i++]);
> > > +	if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
> > > + pci_write_config_word(dev, pos + PCI_X_BRIDGE_UP_SPL_CTL, cap[i++]);
> > > + pci_write_config_word(dev, pos + PCI_X_BRIDGE_DN_SPL_CTL, cap[i++]);
> > 
> > These look like the proper two registers to save.
> > 
> > > +	} else
> > > +		pci_write_config_word(dev, pos + PCI_X_CMD, cap[i++]);
> > >  	pci_remove_saved_cap(save_state);
> > >  	kfree(save_state);
> > >  }
> > > diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h
> > > index f09cce2..fb7eefd 100644
> > > --- a/include/linux/pci_regs.h
> > > +++ b/include/linux/pci_regs.h
> > > @@ -332,6 +332,8 @@
> > >  #define PCI_X_STATUS_SPL_ERR 0x20000000 /* Rcvd Split Completion Error Msg */
> > >  #define  PCI_X_STATUS_266MHZ	0x40000000	/* 266 MHz capable */
> > >  #define  PCI_X_STATUS_533MHZ	0x80000000	/* 533 MHz capable */
> > > +#define PCI_X_BRIDGE_UP_SPL_CTL 10 /* PCI-X upstream split transaction limit */
> > > +#define PCI_X_BRIDGE_DN_SPL_CTL 14 /* PCI-X downstream split transaction limit */
> > 
> > Unless I am completely misreading the spec. While you have picked the
> > right register to save the offsets should be 0x08 and 0x0c or 8 and 12....
> 
> No, the spec is written in terms of dwords (32 bit), we are storing words (16 bits).
> The data at offsets 8 and 12 is read-only split transaction capacity.
> Split transaction limit starts at bit 16 so you need to add 2 to byte offset.

So, Eric, what are your thoughts on this patch (probably wrt 2.6.22)?
Since the rest of the save/restore code uses 16 bit transactions,
it should be safe here too?

-- 
MST
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/