Really Cc: [email protected]
Richard A Nelson napsal(a):
> My son has an earlier version of the M2V & BIOS (0901) and his gets full
> 6ch
> sound.
>
> The 1.01G, and related BIOS (1304 or 1701) do not properly handle the
> onboard sound:
> hda_codec: Unknown model for ALC660VD/ALC861VD, trying auto-probe from
> BIOS...
What does your /proc/asound/version say?
> it seems to truely be a BIOS issue, as I don't see a difference in lspci
> -vvxxx between our systems:
>
> 80:01.0 Audio device: VIA Technologies, Inc. VIA High Definition Audio
> Controller (rev 10)
> Subsystem: ASUSTeK Computer Inc. Unknown device 81e7
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Step ping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 17
> Region 0: Memory at fbffc000 (64-bit, non-prefetchable) [size=16K]
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
> PME(D0+,D1-,D2-,D3ho t+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+
> Queue=0/0 Enable-
> Address: 0000000000000000 Data: 0000
> Capabilities: [70] Express Unknown type IRQ 0
> Device: Supported: MaxPayload 128 bytes, PhantFunc 0,
> ExtTag-
> Device: Latency L0s <64ns, L1 <1us
> Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
> Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
> Link: Supported Speed unknown, Width x0, ASPM unknown,
> Port 0
> Link: Latency L0s <64ns, L1 <1us
> Link: ASPM Disabled CommClk- ExtSynch-
> Link: Speed unknown, Width x0
> 00: 06 11 88 32 06 00 10 00 10 00 03 04 10 00 00 00
> 10: 04 c0 ff fb 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 e7 81
> 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 00 00
> 40: 00 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 50: 01 60 42 c8 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 05 70 80 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 10 00 91 00 00 00 00 00 00 00 30 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> ALSA, instead of seeing ALC660, on my box sees ALC660-VD, with very
> little in the way of devices (only front output) - which does not work
> either :(
>
> Stumped on where to go from here...
regards,
--
http://www.fi.muni.cz/~xslaby/ Jiri Slaby
faculty of informatics, masaryk university, brno, cz
e-mail: jirislaby gmail com, gpg pubkey fingerprint:
B674 9967 0407 CE62 ACC8 22A0 32CC 55C3 39D4 7A7E
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
