Remove everything related to legacy power management.
Signed-off-by: Robert P. J. Day <[email protected]>
---
OK, this is an official patch submission which extends the previous
unofficial one since it also removes the vestiges of legacy PM for the
FR-V and MIPS architectures, although it has been compile-tested only
on x86.
Documentation/pm.txt | 123 -----------------
arch/frv/kernel/pm.c | 8 -
arch/i386/kernel/apm.c | 27 ---
arch/mips/au1000/common/power.c | 4
drivers/acpi/bus.c | 14 --
drivers/net/3c509.c | 1
drivers/serial/68328serial.c | 59 --------
include/linux/pm.h | 70 ----------
include/linux/pm_legacy.h | 41 -----
kernel/power/Kconfig | 10 -
kernel/power/Makefile | 1
kernel/power/pm.c | 209 ------------------------------
12 files changed, 1 insertion(+), 566 deletions(-)
diff --git a/Documentation/pm.txt b/Documentation/pm.txt
index da8589a..d0fcfe2 100644
--- a/Documentation/pm.txt
+++ b/Documentation/pm.txt
@@ -36,93 +36,6 @@ system the associated daemon will exit gracefully.
apmd: http://worldvisions.ca/~apenwarr/apmd/
acpid: http://acpid.sf.net/
-Driver Interface -- OBSOLETE, DO NOT USE!
-----------------*************************
-
-Note: pm_register(), pm_access(), pm_dev_idle() and friends are
-obsolete. Please do not use them. Instead you should properly hook
-your driver into the driver model, and use its suspend()/resume()
-callbacks to do this kind of stuff.
-
-If you are writing a new driver or maintaining an old driver, it
-should include power management support. Without power management
-support, a single driver may prevent a system with power management
-capabilities from ever being able to suspend (safely).
-
-Overview:
-1) Register each instance of a device with "pm_register"
-2) Call "pm_access" before accessing the hardware.
- (this will ensure that the hardware is awake and ready)
-3) Your "pm_callback" is called before going into a
- suspend state (ACPI D1-D3) or after resuming (ACPI D0)
- from a suspend.
-4) Call "pm_dev_idle" when the device is not being used
- (optional but will improve device idle detection)
-5) When unloaded, unregister the device with "pm_unregister"
-
-/*
- * Description: Register a device with the power-management subsystem
- *
- * Parameters:
- * type - device type (PCI device, system device, ...)
- * id - instance number or unique identifier
- * cback - request handler callback (suspend, resume, ...)
- *
- * Returns: Registered PM device or NULL on error
- *
- * Examples:
- * dev = pm_register(PM_SYS_DEV, PM_SYS_VGA, vga_callback);
- *
- * struct pci_dev *pci_dev = pci_find_dev(...);
- * dev = pm_register(PM_PCI_DEV, PM_PCI_ID(pci_dev), callback);
- */
-struct pm_dev *pm_register(pm_dev_t type, unsigned long id, pm_callback cback);
-
-/*
- * Description: Unregister a device with the power management subsystem
- *
- * Parameters:
- * dev - PM device previously returned from pm_register
- */
-void pm_unregister(struct pm_dev *dev);
-
-/*
- * Description: Unregister all devices with a matching callback function
- *
- * Parameters:
- * cback - previously registered request callback
- *
- * Notes: Provided for easier porting from old APM interface
- */
-void pm_unregister_all(pm_callback cback);
-
-/*
- * Power management request callback
- *
- * Parameters:
- * dev - PM device previously returned from pm_register
- * rqst - request type
- * data - data, if any, associated with the request
- *
- * Returns: 0 if the request is successful
- * EINVAL if the request is not supported
- * EBUSY if the device is now busy and cannot handle the request
- * ENOMEM if the device was unable to handle the request due to memory
- *
- * Details: The device request callback will be called before the
- * device/system enters a suspend state (ACPI D1-D3) or
- * or after the device/system resumes from suspend (ACPI D0).
- * For PM_SUSPEND, the ACPI D-state being entered is passed
- * as the "data" argument to the callback. The device
- * driver should save (PM_SUSPEND) or restore (PM_RESUME)
- * device context when the request callback is called.
- *
- * Once a driver returns 0 (success) from a suspend
- * request, it should not process any further requests or
- * access the device hardware until a call to "pm_access" is made.
- */
-typedef int (*pm_callback)(struct pm_dev *dev, pm_request_t rqst, void *data);
-
Driver Details
--------------
This is just a quick Q&A as a stopgap until a real driver writers'
@@ -219,39 +132,3 @@ Q: Who do I contact for additional information about
enabling power management for my specific driver/device?
ACPI Development mailing list: [email protected]
-
-System Interface -- OBSOLETE, DO NOT USE!
-----------------*************************
-If you are providing new power management support to Linux (ie.
-adding support for something like APM or ACPI), you should
-communicate with drivers through the existing generic power
-management interface.
-
-/*
- * Send a request to all devices
- *
- * Parameters:
- * rqst - request type
- * data - data, if any, associated with the request
- *
- * Returns: 0 if the request is successful
- * See "pm_callback" return for errors
- *
- * Details: Walk list of registered devices and call pm_send
- * for each until complete or an error is encountered.
- * If an error is encountered for a suspend request,
- * return all devices to the state they were in before
- * the suspend request.
- */
-int pm_send_all(pm_request_t rqst, void *data);
-
-/*
- * Find a matching device
- *
- * Parameters:
- * type - device type (PCI device, system device, or 0 to match all devices)
- * from - previous match or NULL to start from the beginning
- *
- * Returns: Matching device or NULL if none found
- */
-struct pm_dev *pm_find(pm_dev_t type, struct pm_dev *from);
diff --git a/arch/frv/kernel/pm.c b/arch/frv/kernel/pm.c
index c57ce3f..73f3aee 100644
--- a/arch/frv/kernel/pm.c
+++ b/arch/frv/kernel/pm.c
@@ -163,14 +163,11 @@ static int sysctl_pm_do_suspend(ctl_table *ctl, int write, struct file *filp,
if ((mode != 1) && (mode != 5))
return -EINVAL;
- retval = pm_send_all(PM_SUSPEND, (void *)3);
-
if (retval == 0) {
if (mode == 5)
retval = pm_do_bus_sleep();
else
retval = pm_do_suspend();
- pm_send_all(PM_RESUME, (void *)0);
}
return retval;
@@ -183,9 +180,6 @@ static int try_set_cmode(int new_cmode)
if (!(clock_cmodes_permitted & (1<<new_cmode)))
return -EINVAL;
- /* tell all the drivers we're suspending */
- pm_send_all(PM_SUSPEND, (void *)3);
-
/* now change cmode */
local_irq_disable();
frv_dma_pause_all();
@@ -201,8 +195,6 @@ static int try_set_cmode(int new_cmode)
frv_dma_resume_all();
local_irq_enable();
- /* tell all the drivers we're resuming */
- pm_send_all(PM_RESUME, (void *)0);
return 0;
}
diff --git a/arch/i386/kernel/apm.c b/arch/i386/kernel/apm.c
index 064bbf2..46c3ee6 100644
--- a/arch/i386/kernel/apm.c
+++ b/arch/i386/kernel/apm.c
@@ -218,7 +218,6 @@
#include <linux/time.h>
#include <linux/sched.h>
#include <linux/pm.h>
-#include <linux/pm_legacy.h>
#include <linux/capability.h>
#include <linux/device.h>
#include <linux/kernel.h>
@@ -1197,19 +1196,6 @@ static int suspend(int vetoable)
int err;
struct apm_user *as;
- if (pm_send_all(PM_SUSPEND, (void *)3)) {
- /* Vetoed */
- if (vetoable) {
- if (apm_info.connection_version > 0x100)
- set_system_power_state(APM_STATE_REJECT);
- err = -EBUSY;
- ignore_sys_suspend = 0;
- printk(KERN_WARNING "apm: suspend was vetoed.\n");
- goto out;
- }
- printk(KERN_CRIT "apm: suspend was vetoed, but suspending anyway.\n");
- }
-
device_suspend(PMSG_SUSPEND);
local_irq_disable();
device_power_down(PMSG_SUSPEND);
@@ -1232,7 +1218,6 @@ static int suspend(int vetoable)
device_power_up();
local_irq_enable();
device_resume();
- pm_send_all(PM_RESUME, (void *)0);
queue_event(APM_NORMAL_RESUME, NULL);
out:
spin_lock(&user_list_lock);
@@ -1345,7 +1330,6 @@ static void check_events(void)
if ((event != APM_NORMAL_RESUME)
|| (ignore_normal_resume == 0)) {
device_resume();
- pm_send_all(PM_RESUME, (void *)0);
queue_event(event, NULL);
}
ignore_normal_resume = 0;
@@ -2264,14 +2248,6 @@ static int __init apm_init(void)
apm_info.disabled = 1;
return -ENODEV;
}
- if (PM_IS_ACTIVE()) {
- printk(KERN_NOTICE "apm: overridden by ACPI.\n");
- apm_info.disabled = 1;
- return -ENODEV;
- }
-#ifdef CONFIG_PM_LEGACY
- pm_active = 1;
-#endif
/*
* Set up a segment that references the real mode segment 0x40
@@ -2375,9 +2351,6 @@ static void __exit apm_exit(void)
kthread_stop(kapmd_task);
kapmd_task = NULL;
}
-#ifdef CONFIG_PM_LEGACY
- pm_active = 0;
-#endif
}
module_init(apm_init);
diff --git a/arch/mips/au1000/common/power.c b/arch/mips/au1000/common/power.c
index 3901e8e..f3685d6 100644
--- a/arch/mips/au1000/common/power.c
+++ b/arch/mips/au1000/common/power.c
@@ -278,13 +278,11 @@ static int pm_do_sleep(ctl_table * ctl, int write, struct file *file,
p = buf;
sleep_ticks = simple_strtoul(p, &p, 0);
#endif
- retval = pm_send_all(PM_SUSPEND, (void *) 2);
if (retval)
return retval;
au_sleep();
- retval = pm_send_all(PM_RESUME, (void *) 0);
}
return retval;
}
@@ -297,12 +295,10 @@ static int pm_do_suspend(ctl_table * ctl, int write, struct file *file,
if (!write) {
*len = 0;
} else {
- retval = pm_send_all(PM_SUSPEND, (void *) 2);
if (retval)
return retval;
suspend_mode = 1;
- retval = pm_send_all(PM_RESUME, (void *) 0);
}
return retval;
}
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index dd49ea0..b3e92b4 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -29,7 +29,6 @@
#include <linux/list.h>
#include <linux/sched.h>
#include <linux/pm.h>
-#include <linux/pm_legacy.h>
#include <linux/device.h>
#include <linux/proc_fs.h>
#ifdef CONFIG_X86
@@ -752,18 +751,7 @@ static int __init acpi_init(void)
result = acpi_bus_init();
- if (!result) {
-#ifdef CONFIG_PM_LEGACY
- if (!PM_IS_ACTIVE())
- pm_active = 1;
- else {
- printk(KERN_INFO PREFIX
- "APM is already active, exiting\n");
- disable_acpi();
- result = -ENODEV;
- }
-#endif
- } else
+ if (result)
disable_acpi();
return result;
diff --git a/drivers/net/3c509.c b/drivers/net/3c509.c
index f791bf0..a8ea346 100644
--- a/drivers/net/3c509.c
+++ b/drivers/net/3c509.c
@@ -83,7 +83,6 @@ static int max_interrupt_work = 10;
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/pm.h>
-#include <linux/pm_legacy.h>
#include <linux/skbuff.h>
#include <linux/delay.h> /* for udelay() */
#include <linux/spinlock.h>
diff --git a/drivers/serial/68328serial.c b/drivers/serial/68328serial.c
index cad426c..151bd9a 100644
--- a/drivers/serial/68328serial.c
+++ b/drivers/serial/68328serial.c
@@ -33,7 +33,6 @@
#include <linux/keyboard.h>
#include <linux/init.h>
#include <linux/pm.h>
-#include <linux/pm_legacy.h>
#include <linux/bitops.h>
#include <linux/delay.h>
@@ -1324,59 +1323,6 @@ static void show_serial_version(void)
printk("MC68328 serial driver version 1.00\n");
}
-#ifdef CONFIG_PM_LEGACY
-/* Serial Power management
- * The console (currently fixed at line 0) is a special case for power
- * management because the kernel is so chatty. The console will be
- * explicitly disabled my our power manager as the last minute, so we won't
- * mess with it here.
- */
-static struct pm_dev *serial_pm[NR_PORTS];
-
-static int serial_pm_callback(struct pm_dev *dev, pm_request_t request, void *data)
-{
- struct m68k_serial *info = (struct m68k_serial *)dev->data;
-
- if(info == NULL)
- return -1;
-
- /* special case for line 0 - pm restores it */
- if(info->line == 0)
- return 0;
-
- switch (request) {
- case PM_SUSPEND:
- shutdown(info);
- break;
-
- case PM_RESUME:
- startup(info);
- break;
- }
- return 0;
-}
-
-void shutdown_console(void)
-{
- struct m68k_serial *info = &m68k_soft[0];
-
- /* HACK: wait a bit for any pending printk's to be dumped */
- {
- int i = 10000;
- while(i--);
- }
-
- shutdown(info);
-}
-
-void startup_console(void)
-{
- struct m68k_serial *info = &m68k_soft[0];
- startup(info);
-}
-#endif /* CONFIG_PM_LEGACY */
-
-
static const struct tty_operations rs_ops = {
.open = rs_open,
.close = rs_close,
@@ -1467,11 +1413,6 @@ rs68328_init(void)
IRQ_FLG_STD,
"M68328_UART", NULL))
panic("Unable to attach 68328 serial interrupt\n");
-#ifdef CONFIG_PM_LEGACY
- serial_pm[i] = pm_register(PM_SYS_DEV, PM_SYS_COM, serial_pm_callback);
- if (serial_pm[i])
- serial_pm[i]->data = info;
-#endif
}
local_irq_restore(flags);
return 0;
diff --git a/include/linux/pm.h b/include/linux/pm.h
index 21db05a..c505f89 100644
--- a/include/linux/pm.h
+++ b/include/linux/pm.h
@@ -27,76 +27,6 @@
#include <asm/atomic.h>
/*
- * Power management requests... these are passed to pm_send_all() and friends.
- *
- * these functions are old and deprecated, see below.
- */
-typedef int __bitwise pm_request_t;
-
-#define PM_SUSPEND ((__force pm_request_t) 1) /* enter D1-D3 */
-#define PM_RESUME ((__force pm_request_t) 2) /* enter D0 */
-
-
-/*
- * Device types... these are passed to pm_register
- */
-typedef int __bitwise pm_dev_t;
-
-#define PM_UNKNOWN_DEV ((__force pm_dev_t) 0) /* generic */
-#define PM_SYS_DEV ((__force pm_dev_t) 1) /* system device (fan, KB controller, ...) */
-#define PM_PCI_DEV ((__force pm_dev_t) 2) /* PCI device */
-#define PM_USB_DEV ((__force pm_dev_t) 3) /* USB device */
-#define PM_SCSI_DEV ((__force pm_dev_t) 4) /* SCSI device */
-#define PM_ISA_DEV ((__force pm_dev_t) 5) /* ISA device */
-#define PM_MTD_DEV ((__force pm_dev_t) 6) /* Memory Technology Device */
-
-/*
- * System device hardware ID (PnP) values
- */
-enum
-{
- PM_SYS_UNKNOWN = 0x00000000, /* generic */
- PM_SYS_KBC = 0x41d00303, /* keyboard controller */
- PM_SYS_COM = 0x41d00500, /* serial port */
- PM_SYS_IRDA = 0x41d00510, /* IRDA controller */
- PM_SYS_FDC = 0x41d00700, /* floppy controller */
- PM_SYS_VGA = 0x41d00900, /* VGA controller */
- PM_SYS_PCMCIA = 0x41d00e00, /* PCMCIA controller */
-};
-
-/*
- * Device identifier
- */
-#define PM_PCI_ID(dev) ((dev)->bus->number << 16 | (dev)->devfn)
-
-/*
- * Request handler callback
- */
-struct pm_dev;
-
-typedef int (*pm_callback)(struct pm_dev *dev, pm_request_t rqst, void *data);
-
-/*
- * Dynamic device information
- */
-struct pm_dev
-{
- pm_dev_t type;
- unsigned long id;
- pm_callback callback;
- void *data;
-
- unsigned long flags;
- unsigned long state;
- unsigned long prev_state;
-
- struct list_head entry;
-};
-
-/* Functions above this comment are list-based old-style power
- * managment. Please avoid using them. */
-
-/*
* Callbacks for platform drivers to implement.
*/
extern void (*pm_idle)(void);
diff --git a/include/linux/pm_legacy.h b/include/linux/pm_legacy.h
deleted file mode 100644
index 514729a..0000000
--- a/include/linux/pm_legacy.h
+++ /dev/null
@@ -1,41 +0,0 @@
-#ifndef __LINUX_PM_LEGACY_H__
-#define __LINUX_PM_LEGACY_H__
-
-
-#ifdef CONFIG_PM_LEGACY
-
-extern int pm_active;
-
-#define PM_IS_ACTIVE() (pm_active != 0)
-
-/*
- * Register a device with power management
- */
-struct pm_dev __deprecated *
-pm_register(pm_dev_t type, unsigned long id, pm_callback callback);
-
-/*
- * Send a request to all devices
- */
-int __deprecated pm_send_all(pm_request_t rqst, void *data);
-
-#else /* CONFIG_PM_LEGACY */
-
-#define PM_IS_ACTIVE() 0
-
-static inline struct pm_dev *pm_register(pm_dev_t type,
- unsigned long id,
- pm_callback callback)
-{
- return NULL;
-}
-
-static inline int pm_send_all(pm_request_t rqst, void *data)
-{
- return 0;
-}
-
-#endif /* CONFIG_PM_LEGACY */
-
-#endif /* __LINUX_PM_LEGACY_H__ */
-
diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig
index 51a4dd0..7ade6eb 100644
--- a/kernel/power/Kconfig
+++ b/kernel/power/Kconfig
@@ -19,16 +19,6 @@ config PM
will issue the hlt instruction if nothing is to be done, thereby
sending the processor to sleep and saving power.
-config PM_LEGACY
- bool "Legacy Power Management API (DEPRECATED)"
- depends on PM
- default n
- ---help---
- Support for pm_register() and friends. This old API is obsoleted
- by the driver model.
-
- If unsure, say N.
-
config PM_DEBUG
bool "Power Management Debug Support"
depends on PM
diff --git a/kernel/power/Makefile b/kernel/power/Makefile
index 38725f5..846b303 100644
--- a/kernel/power/Makefile
+++ b/kernel/power/Makefile
@@ -4,7 +4,6 @@ EXTRA_CFLAGS += -DDEBUG
endif
obj-y := main.o process.o console.o
-obj-$(CONFIG_PM_LEGACY) += pm.o
obj-$(CONFIG_SOFTWARE_SUSPEND) += swsusp.o disk.o snapshot.o swap.o user.o
obj-$(CONFIG_MAGIC_SYSRQ) += poweroff.o
diff --git a/kernel/power/pm.c b/kernel/power/pm.c
deleted file mode 100644
index c50d152..0000000
--- a/kernel/power/pm.c
+++ /dev/null
@@ -1,209 +0,0 @@
-/*
- * pm.c - Power management interface
- *
- * Copyright (C) 2000 Andrew Henroid
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/pm.h>
-#include <linux/pm_legacy.h>
-#include <linux/interrupt.h>
-#include <linux/mutex.h>
-
-int pm_active;
-
-/*
- * Locking notes:
- * pm_devs_lock can be a semaphore providing pm ops are not called
- * from an interrupt handler (already a bad idea so no change here). Each
- * change must be protected so that an unlink of an entry doesn't clash
- * with a pm send - which is permitted to sleep in the current architecture
- *
- * Module unloads clashing with pm events now work out safely, the module
- * unload path will block until the event has been sent. It may well block
- * until a resume but that will be fine.
- */
-
-static DEFINE_MUTEX(pm_devs_lock);
-static LIST_HEAD(pm_devs);
-
-/**
- * pm_register - register a device with power management
- * @type: device type
- * @id: device ID
- * @callback: callback function
- *
- * Add a device to the list of devices that wish to be notified about
- * power management events. A &pm_dev structure is returned on success,
- * on failure the return is %NULL.
- *
- * The callback function will be called in process context and
- * it may sleep.
- */
-
-struct pm_dev *pm_register(pm_dev_t type,
- unsigned long id,
- pm_callback callback)
-{
- struct pm_dev *dev = kzalloc(sizeof(struct pm_dev), GFP_KERNEL);
- if (dev) {
- dev->type = type;
- dev->id = id;
- dev->callback = callback;
-
- mutex_lock(&pm_devs_lock);
- list_add(&dev->entry, &pm_devs);
- mutex_unlock(&pm_devs_lock);
- }
- return dev;
-}
-
-/**
- * pm_send - send request to a single device
- * @dev: device to send to
- * @rqst: power management request
- * @data: data for the callback
- *
- * Issue a power management request to a given device. The
- * %PM_SUSPEND and %PM_RESUME events are handled specially. The
- * data field must hold the intended next state. No call is made
- * if the state matches.
- *
- * BUGS: what stops two power management requests occurring in parallel
- * and conflicting.
- *
- * WARNING: Calling pm_send directly is not generally recommended, in
- * particular there is no locking against the pm_dev going away. The
- * caller must maintain all needed locking or have 'inside knowledge'
- * on the safety. Also remember that this function is not locked against
- * pm_unregister. This means that you must handle SMP races on callback
- * execution and unload yourself.
- */
-
-static int pm_send(struct pm_dev *dev, pm_request_t rqst, void *data)
-{
- int status = 0;
- unsigned long prev_state, next_state;
-
- if (in_interrupt())
- BUG();
-
- switch (rqst) {
- case PM_SUSPEND:
- case PM_RESUME:
- prev_state = dev->state;
- next_state = (unsigned long) data;
- if (prev_state != next_state) {
- if (dev->callback)
- status = (*dev->callback)(dev, rqst, data);
- if (!status) {
- dev->state = next_state;
- dev->prev_state = prev_state;
- }
- }
- else {
- dev->prev_state = prev_state;
- }
- break;
- default:
- if (dev->callback)
- status = (*dev->callback)(dev, rqst, data);
- break;
- }
- return status;
-}
-
-/*
- * Undo incomplete request
- */
-static void pm_undo_all(struct pm_dev *last)
-{
- struct list_head *entry = last->entry.prev;
- while (entry != &pm_devs) {
- struct pm_dev *dev = list_entry(entry, struct pm_dev, entry);
- if (dev->state != dev->prev_state) {
- /* previous state was zero (running) resume or
- * previous state was non-zero (suspended) suspend
- */
- pm_request_t undo = (dev->prev_state
- ? PM_SUSPEND:PM_RESUME);
- pm_send(dev, undo, (void*) dev->prev_state);
- }
- entry = entry->prev;
- }
-}
-
-/**
- * pm_send_all - send request to all managed devices
- * @rqst: power management request
- * @data: data for the callback
- *
- * Issue a power management request to a all devices. The
- * %PM_SUSPEND events are handled specially. Any device is
- * permitted to fail a suspend by returning a non zero (error)
- * value from its callback function. If any device vetoes a
- * suspend request then all other devices that have suspended
- * during the processing of this request are restored to their
- * previous state.
- *
- * WARNING: This function takes the pm_devs_lock. The lock is not dropped until
- * the callbacks have completed. This prevents races against pm locking
- * functions, races against module unload pm_unregister code. It does
- * mean however that you must not issue pm_ functions within the callback
- * or you will deadlock and users will hate you.
- *
- * Zero is returned on success. If a suspend fails then the status
- * from the device that vetoes the suspend is returned.
- *
- * BUGS: what stops two power management requests occurring in parallel
- * and conflicting.
- */
-
-int pm_send_all(pm_request_t rqst, void *data)
-{
- struct list_head *entry;
-
- mutex_lock(&pm_devs_lock);
- entry = pm_devs.next;
- while (entry != &pm_devs) {
- struct pm_dev *dev = list_entry(entry, struct pm_dev, entry);
- if (dev->callback) {
- int status = pm_send(dev, rqst, data);
- if (status) {
- /* return devices to previous state on
- * failed suspend request
- */
- if (rqst == PM_SUSPEND)
- pm_undo_all(dev);
- mutex_unlock(&pm_devs_lock);
- return status;
- }
- }
- entry = entry->next;
- }
- mutex_unlock(&pm_devs_lock);
- return 0;
-}
-
-EXPORT_SYMBOL(pm_register);
-EXPORT_SYMBOL(pm_send_all);
-EXPORT_SYMBOL(pm_active);
-
-
--
========================================================================
Robert P. J. Day
Linux Consulting, Training and Annoying Kernel Pedantry
Waterloo, Ontario, CANADA
http://fsdev.net/wiki/index.php?title=Main_Page
========================================================================
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
