Re: 2.6.21-rc6-mm1 USB related boot hang

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 12 Apr 2007, Jiri Kosina wrote:

> CONFIG_IPMI_SI=y
> hangs upon boot on the already mentioned printk from ipmi_si. With
> CONFIG_IPMI_SI=m
> the boot succeeds. When manually trying to modprobe ipmi_si after that, 
> the modprobe itself hangs, but the machine remains usable otherwise.

Actually, after approximately 6 minutes 30 seconds, the modprobe finishes 
with -ENODEV and the following is spitted into dmesg:

ipmi_si: There appears to be no BMC at this location
ACPI: PCI interrupt for device 0000:02:00.4 disabled
ipmi_si: Unable to find any System Interface(s)

Anyway I just checked that I get precisely the same behavior with plain 
2.6.21-rc6, so we can rule out -mm with this issue.

It's possible that this system has some broken KCS. I will try to narrow 
this down.

Anyway, the USB-related hang Helge is seeing is therefore a different 
story.

-- 
Jiri Kosina
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux