From: Kyungmin Park <[email protected]>
Add some OMAP 24xx pin mux declarations to support:
- TUSB 6010 EVM (on H4)
- All three full speed USB ports
- GPIOs used with USB0 on Apollon and H4
For OMAP2, issue MUX_WARNINGS and debug messages correctly; and make the
message look more like the OMAP1 message.
Signed-off-by: Kyungmin Park <[email protected]>
Signed-off-by: David Brownell <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
---
arch/arm/mach-omap2/mux.c | 33 +++++++++++++++++++++++++++++++--
arch/arm/plat-omap/mux.c | 19 +++++++++++++++----
include/asm-arm/arch-omap/mux.h | 31 ++++++++++++++++++++++++++++++-
3 files changed, 76 insertions(+), 7 deletions(-)
Index: linux-2.6/arch/arm/mach-omap2/mux.c
===================================================================
--- linux-2.6.orig/arch/arm/mach-omap2/mux.c 2007-04-06 09:00:28.000000000 -0400
+++ linux-2.6/arch/arm/mach-omap2/mux.c 2007-04-09 15:23:42.000000000 -0400
@@ -43,7 +43,7 @@ struct pin_config __initdata_or_module o
/* 24xx I2C */
MUX_CFG_24XX("M19_24XX_I2C1_SCL", 0x111, 0, 0, 0, 1)
MUX_CFG_24XX("L15_24XX_I2C1_SDA", 0x112, 0, 0, 0, 1)
-MUX_CFG_24XX("J15_24XX_I2C2_SCL", 0x113, 0, 0, 0, 1)
+MUX_CFG_24XX("J15_24XX_I2C2_SCL", 0x113, 0, 0, 1, 1)
MUX_CFG_24XX("H19_24XX_I2C2_SDA", 0x114, 0, 0, 0, 1)
/* Menelaus interrupt */
@@ -52,7 +52,9 @@ MUX_CFG_24XX("W19_24XX_SYS_NIRQ", 0x12c,
/* 24xx clocks */
MUX_CFG_24XX("W14_24XX_SYS_CLKOUT", 0x137, 0, 1, 1, 1)
-/* 24xx GPMC wait pin monitoring */
+/* 24xx GPMC chipselects, wait pin monitoring */
+MUX_CFG_24XX("E2_GPMC_NCS2", 0x08e, 0, 1, 1, 1)
+MUX_CFG_24XX("L2_GPMC_NCS7", 0x093, 0, 1, 1, 1)
MUX_CFG_24XX("L3_GPMC_WAIT0", 0x09a, 0, 1, 1, 1)
MUX_CFG_24XX("N7_GPMC_WAIT1", 0x09b, 0, 1, 1, 1)
MUX_CFG_24XX("M1_GPMC_WAIT2", 0x09c, 0, 1, 1, 1)
@@ -66,6 +68,7 @@ MUX_CFG_24XX("V15_24XX_MCBSP2_DX", 0x127
/* 24xx GPIO */
MUX_CFG_24XX("M21_242X_GPIO11", 0x0c9, 3, 1, 1, 1)
+MUX_CFG_24XX("P21_242X_GPIO12", 0x0ca, 3, 0, 0, 1)
MUX_CFG_24XX("AA10_242X_GPIO13", 0x0e5, 3, 0, 0, 1)
MUX_CFG_24XX("AA6_242X_GPIO14", 0x0e6, 3, 0, 0, 1)
MUX_CFG_24XX("AA4_242X_GPIO15", 0x0e7, 3, 0, 0, 1)
@@ -75,7 +78,9 @@ MUX_CFG_24XX("AA8_242X_GPIO58", 0x0ea,
MUX_CFG_24XX("Y20_24XX_GPIO60", 0x12c, 3, 0, 0, 1)
MUX_CFG_24XX("W4__24XX_GPIO74", 0x0f2, 3, 0, 0, 1)
MUX_CFG_24XX("M15_24XX_GPIO92", 0x10a, 3, 0, 0, 1)
+MUX_CFG_24XX("J15_24XX_GPIO99", 0x113, 3, 1, 1, 1)
MUX_CFG_24XX("V14_24XX_GPIO117", 0x128, 3, 1, 0, 1)
+MUX_CFG_24XX("P14_24XX_GPIO125", 0x140, 3, 1, 1, 1)
/* 242x DBG GPIO */
MUX_CFG_24XX("V4_242X_GPIO49", 0xd3, 3, 0, 0, 1)
@@ -118,6 +123,30 @@ MUX_CFG_24XX("E18_24XX_MMC_DAT_DIR3", 0x
MUX_CFG_24XX("G18_24XX_MMC_CMD_DIR", 0x0fd, 0, 0, 0, 1)
MUX_CFG_24XX("H15_24XX_MMC_CLKI", 0x0fe, 0, 0, 0, 1)
+/* Full speed USB */
+MUX_CFG_24XX("J20_24XX_USB0_PUEN", 0x11d, 0, 0, 0, 1)
+MUX_CFG_24XX("J19_24XX_USB0_VP", 0x11e, 0, 0, 0, 1)
+MUX_CFG_24XX("K20_24XX_USB0_VM", 0x11f, 0, 0, 0, 1)
+MUX_CFG_24XX("J18_24XX_USB0_RCV", 0x120, 0, 0, 0, 1)
+MUX_CFG_24XX("K19_24XX_USB0_TXEN", 0x121, 0, 0, 0, 1)
+MUX_CFG_24XX("J14_24XX_USB0_SE0", 0x122, 0, 0, 0, 1)
+MUX_CFG_24XX("K18_24XX_USB0_DAT", 0x123, 0, 0, 0, 1)
+
+MUX_CFG_24XX("N14_24XX_USB1_SE0", 0x0ed, 2, 0, 0, 1)
+MUX_CFG_24XX("W12_24XX_USB1_SE0", 0x0dd, 3, 0, 0, 1)
+MUX_CFG_24XX("P15_24XX_USB1_DAT", 0x0ee, 2, 0, 0, 1)
+MUX_CFG_24XX("R13_24XX_USB1_DAT", 0x0e0, 3, 0, 0, 1)
+MUX_CFG_24XX("W20_24XX_USB1_TXEN", 0x0ec, 2, 0, 0, 1)
+MUX_CFG_24XX("P13_24XX_USB1_TXEN", 0x0df, 3, 0, 0, 1)
+MUX_CFG_24XX("V19_24XX_USB1_RCV", 0x0eb, 2, 0, 0, 1)
+MUX_CFG_24XX("V12_24XX_USB1_RCV", 0x0de, 3, 0, 0, 1)
+
+MUX_CFG_24XX("AA10_24XX_USB2_SE0", 0x0e5, 2, 0, 0, 1)
+MUX_CFG_24XX("Y11_24XX_USB2_DAT", 0x0e8, 2, 0, 0, 1)
+MUX_CFG_24XX("AA12_24XX_USB2_TXEN", 0x0e9, 2, 0, 0, 1)
+MUX_CFG_24XX("AA6_24XX_USB2_RCV", 0x0e6, 2, 0, 0, 1)
+MUX_CFG_24XX("AA4_24XX_USB2_TLLSE0", 0x0e7, 2, 0, 0, 1)
+
/* Keypad GPIO*/
MUX_CFG_24XX("T19_24XX_KBR0", 0x106, 3, 1, 1, 1)
MUX_CFG_24XX("R19_24XX_KBR1", 0x107, 3, 1, 1, 1)
Index: linux-2.6/arch/arm/plat-omap/mux.c
===================================================================
--- linux-2.6.orig/arch/arm/plat-omap/mux.c 2007-04-06 09:00:28.000000000 -0400
+++ linux-2.6/arch/arm/plat-omap/mux.c 2007-04-09 15:23:42.000000000 -0400
@@ -83,10 +83,21 @@ int __init_or_module omap_cfg_reg(const
reg |= OMAP24XX_PULL_ENA;
if(cfg->pu_pd_val)
reg |= OMAP24XX_PULL_UP;
-#ifdef CONFIG_OMAP_MUX_DEBUG
- printk("Muxing %s (0x%08x): 0x%02x -> 0x%02x\n",
- cfg->name, OMAP24XX_L4_BASE + cfg->mux_reg,
- omap_readb(OMAP24XX_L4_BASE + cfg->mux_reg), reg);
+#if defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS)
+ {
+ u8 orig = omap_readb(OMAP24XX_L4_BASE + cfg->mux_reg);
+ u8 debug = 0;
+
+#ifdef CONFIG_OMAP_MUX_DEBUG
+ debug = cfg->debug;
+#endif
+ warn = (orig != reg);
+ if (debug || warn)
+ printk("MUX: setup %s (0x%08x): 0x%02x -> 0x%02x\n",
+ cfg->name,
+ OMAP24XX_L4_BASE + cfg->mux_reg,
+ orig, reg);
+ }
#endif
omap_writeb(reg, OMAP24XX_L4_BASE + cfg->mux_reg);
Index: linux-2.6/include/asm-arm/arch-omap/mux.h
===================================================================
--- linux-2.6.orig/include/asm-arm/arch-omap/mux.h 2007-04-09 15:12:08.000000000 -0400
+++ linux-2.6/include/asm-arm/arch-omap/mux.h 2007-04-09 15:23:42.000000000 -0400
@@ -444,7 +444,9 @@ enum omap24xx_index {
/* 24xx clock */
W14_24XX_SYS_CLKOUT,
- /* 24xx GPMC wait pin monitoring */
+ /* 24xx GPMC chipselects, wait pin monitoring */
+ E2_GPMC_NCS2,
+ L2_GPMC_NCS7,
L3_GPMC_WAIT0,
N7_GPMC_WAIT1,
M1_GPMC_WAIT2,
@@ -458,6 +460,7 @@ enum omap24xx_index {
/* 24xx GPIO */
M21_242X_GPIO11,
+ P21_242X_GPIO12,
AA10_242X_GPIO13,
AA6_242X_GPIO14,
AA4_242X_GPIO15,
@@ -467,7 +470,9 @@ enum omap24xx_index {
Y20_24XX_GPIO60,
W4__24XX_GPIO74,
M15_24XX_GPIO92,
+ J15_24XX_GPIO99,
V14_24XX_GPIO117,
+ P14_24XX_GPIO125,
/* 242x DBG GPIO */
V4_242X_GPIO49,
@@ -509,6 +514,30 @@ enum omap24xx_index {
G18_24XX_MMC_CMD_DIR,
H15_24XX_MMC_CLKI,
+ /* Full speed USB */
+ J20_24XX_USB0_PUEN,
+ J19_24XX_USB0_VP,
+ K20_24XX_USB0_VM,
+ J18_24XX_USB0_RCV,
+ K19_24XX_USB0_TXEN,
+ J14_24XX_USB0_SE0,
+ K18_24XX_USB0_DAT,
+
+ N14_24XX_USB1_SE0,
+ W12_24XX_USB1_SE0,
+ P15_24XX_USB1_DAT,
+ R13_24XX_USB1_DAT,
+ W20_24XX_USB1_TXEN,
+ P13_24XX_USB1_TXEN,
+ V19_24XX_USB1_RCV,
+ V12_24XX_USB1_RCV,
+
+ AA10_24XX_USB2_SE0,
+ Y11_24XX_USB2_DAT,
+ AA12_24XX_USB2_TXEN,
+ AA6_24XX_USB2_RCV,
+ AA4_24XX_USB2_TLLSE0,
+
/* Keypad GPIO*/
T19_24XX_KBR0,
R19_24XX_KBR1,
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]