Most of asm-i386/bugs.h is code which should be in a C file, so put it there.
Signed-off-by: Jeremy Fitzhardinge <[email protected]>
Cc: Linus Torvalds <[email protected]>
---
arch/i386/kernel/cpu/Makefile | 2
arch/i386/kernel/cpu/bugs.c | 191 +++++++++++++++++++++++++++++++++++++++
include/asm-i386/alternative.h | 1
include/asm-i386/bugs.h | 194 ----------------------------------------
4 files changed, 197 insertions(+), 191 deletions(-)
===================================================================
--- a/arch/i386/kernel/cpu/Makefile
+++ b/arch/i386/kernel/cpu/Makefile
@@ -2,7 +2,7 @@
# Makefile for x86-compatible CPU details and quirks
#
-obj-y := common.o proc.o
+obj-y := common.o proc.o bugs.o
obj-y += amd.o
obj-y += cyrix.o
===================================================================
--- /dev/null
+++ b/arch/i386/kernel/cpu/bugs.c
@@ -0,0 +1,191 @@
+/*
+ * arch/i386/cpu/bugs.c
+ *
+ * Copyright (C) 1994 Linus Torvalds
+ *
+ * Cyrix stuff, June 1998 by:
+ * - Rafael R. Reilova (moved everything from head.S),
+ * <[email protected]>
+ * - Channing Corn (tests & fixes),
+ * - Andrew D. Balsa (code cleanup).
+ */
+#include <linux/init.h>
+#include <linux/utsname.h>
+#include <asm/processor.h>
+#include <asm/i387.h>
+#include <asm/msr.h>
+#include <asm/paravirt.h>
+#include <asm/alternative.h>
+
+static int __init no_halt(char *s)
+{
+ boot_cpu_data.hlt_works_ok = 0;
+ return 1;
+}
+
+__setup("no-hlt", no_halt);
+
+static int __init mca_pentium(char *s)
+{
+ mca_pentium_flag = 1;
+ return 1;
+}
+
+__setup("mca-pentium", mca_pentium);
+
+static int __init no_387(char *s)
+{
+ boot_cpu_data.hard_math = 0;
+ write_cr0(0xE | read_cr0());
+ return 1;
+}
+
+__setup("no387", no_387);
+
+static double __initdata x = 4195835.0;
+static double __initdata y = 3145727.0;
+
+/*
+ * This used to check for exceptions..
+ * However, it turns out that to support that,
+ * the XMM trap handlers basically had to
+ * be buggy. So let's have a correct XMM trap
+ * handler, and forget about printing out
+ * some status at boot.
+ *
+ * We should really only care about bugs here
+ * anyway. Not features.
+ */
+static void __init check_fpu(void)
+{
+ if (!boot_cpu_data.hard_math) {
+#ifndef CONFIG_MATH_EMULATION
+ printk(KERN_EMERG "No coprocessor found and no math emulation present.\n");
+ printk(KERN_EMERG "Giving up.\n");
+ for (;;) ;
+#endif
+ return;
+ }
+
+/* trap_init() enabled FXSR and company _before_ testing for FP problems here. */
+ /* Test for the divl bug.. */
+ __asm__("fninit\n\t"
+ "fldl %1\n\t"
+ "fdivl %2\n\t"
+ "fmull %2\n\t"
+ "fldl %1\n\t"
+ "fsubp %%st,%%st(1)\n\t"
+ "fistpl %0\n\t"
+ "fwait\n\t"
+ "fninit"
+ : "=m" (*&boot_cpu_data.fdiv_bug)
+ : "m" (*&x), "m" (*&y));
+ if (boot_cpu_data.fdiv_bug)
+ printk("Hmm, FPU with FDIV bug.\n");
+}
+
+static void __init check_hlt(void)
+{
+ if (paravirt_enabled())
+ return;
+
+ printk(KERN_INFO "Checking 'hlt' instruction... ");
+ if (!boot_cpu_data.hlt_works_ok) {
+ printk("disabled\n");
+ return;
+ }
+ halt();
+ halt();
+ halt();
+ halt();
+ printk("OK.\n");
+}
+
+/*
+ * Most 386 processors have a bug where a POPAD can lock the
+ * machine even from user space.
+ */
+
+static void __init check_popad(void)
+{
+#ifndef CONFIG_X86_POPAD_OK
+ int res, inp = (int) &res;
+
+ printk(KERN_INFO "Checking for popad bug... ");
+ __asm__ __volatile__(
+ "movl $12345678,%%eax; movl $0,%%edi; pusha; popa; movl (%%edx,%%edi),%%ecx "
+ : "=&a" (res)
+ : "d" (inp)
+ : "ecx", "edi" );
+ /* If this fails, it means that any user program may lock the CPU hard. Too bad. */
+ if (res != 12345678) printk( "Buggy.\n" );
+ else printk( "OK.\n" );
+#endif
+}
+
+/*
+ * Check whether we are able to run this kernel safely on SMP.
+ *
+ * - In order to run on a i386, we need to be compiled for i386
+ * (for due to lack of "invlpg" and working WP on a i386)
+ * - In order to run on anything without a TSC, we need to be
+ * compiled for a i486.
+ * - In order to support the local APIC on a buggy Pentium machine,
+ * we need to be compiled with CONFIG_X86_GOOD_APIC disabled,
+ * which happens implicitly if compiled for a Pentium or lower
+ * (unless an advanced selection of CPU features is used) as an
+ * otherwise config implies a properly working local APIC without
+ * the need to do extra reads from the APIC.
+*/
+
+static void __init check_config(void)
+{
+/*
+ * We'd better not be a i386 if we're configured to use some
+ * i486+ only features! (WP works in supervisor mode and the
+ * new "invlpg" and "bswap" instructions)
+ */
+#if defined(CONFIG_X86_WP_WORKS_OK) || defined(CONFIG_X86_INVLPG) || defined(CONFIG_X86_BSWAP)
+ if (boot_cpu_data.x86 == 3)
+ panic("Kernel requires i486+ for 'invlpg' and other features");
+#endif
+
+/*
+ * If we configured ourselves for a TSC, we'd better have one!
+ */
+#ifdef CONFIG_X86_TSC
+ if (!cpu_has_tsc && !tsc_disable)
+ panic("Kernel compiled for Pentium+, requires TSC feature!");
+#endif
+
+/*
+ * If we were told we had a good local APIC, check for buggy Pentia,
+ * i.e. all B steppings and the C2 stepping of P54C when using their
+ * integrated APIC (see 11AP erratum in "Pentium Processor
+ * Specification Update").
+ */
+#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_GOOD_APIC)
+ if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL
+ && cpu_has_apic
+ && boot_cpu_data.x86 == 5
+ && boot_cpu_data.x86_model == 2
+ && (boot_cpu_data.x86_mask < 6 || boot_cpu_data.x86_mask == 11))
+ panic("Kernel compiled for PMMX+, assumes a local APIC without the read-before-write bug!");
+#endif
+}
+
+
+void __init check_bugs(void)
+{
+ identify_boot_cpu();
+#ifndef CONFIG_SMP
+ printk("CPU: ");
+ print_cpu_info(&boot_cpu_data);
+#endif
+ check_config();
+ check_fpu();
+ check_hlt();
+ check_popad();
+ init_utsname()->machine[1] = '0' + (boot_cpu_data.x86 > 6 ? 6 : boot_cpu_data.x86);
+ alternative_instructions();
+}
===================================================================
--- a/include/asm-i386/alternative.h
+++ b/include/asm-i386/alternative.h
@@ -14,6 +14,7 @@ struct alt_instr {
u8 pad;
};
+extern void alternative_instructions(void);
extern void apply_alternatives(struct alt_instr *start, struct alt_instr *end);
struct module;
===================================================================
--- a/include/asm-i386/bugs.h
+++ b/include/asm-i386/bugs.h
@@ -1,198 +1,12 @@
-/*
- * include/asm-i386/bugs.h
- *
- * Copyright (C) 1994 Linus Torvalds
- *
- * Cyrix stuff, June 1998 by:
- * - Rafael R. Reilova (moved everything from head.S),
- * <[email protected]>
- * - Channing Corn (tests & fixes),
- * - Andrew D. Balsa (code cleanup).
- */
-
/*
* This is included by init/main.c to check for architecture-dependent bugs.
*
* Needs:
* void check_bugs(void);
*/
+#ifndef _ASM_I386_BUG_H
+#define _ASM_I386_BUG_H
-#include <linux/init.h>
-#include <asm/processor.h>
-#include <asm/i387.h>
-#include <asm/msr.h>
-#include <asm/paravirt.h>
+extern void __init check_bugs(void);
-static int __init no_halt(char *s)
-{
- boot_cpu_data.hlt_works_ok = 0;
- return 1;
-}
-
-__setup("no-hlt", no_halt);
-
-static int __init mca_pentium(char *s)
-{
- mca_pentium_flag = 1;
- return 1;
-}
-
-__setup("mca-pentium", mca_pentium);
-
-static int __init no_387(char *s)
-{
- boot_cpu_data.hard_math = 0;
- write_cr0(0xE | read_cr0());
- return 1;
-}
-
-__setup("no387", no_387);
-
-static double __initdata x = 4195835.0;
-static double __initdata y = 3145727.0;
-
-/*
- * This used to check for exceptions..
- * However, it turns out that to support that,
- * the XMM trap handlers basically had to
- * be buggy. So let's have a correct XMM trap
- * handler, and forget about printing out
- * some status at boot.
- *
- * We should really only care about bugs here
- * anyway. Not features.
- */
-static void __init check_fpu(void)
-{
- if (!boot_cpu_data.hard_math) {
-#ifndef CONFIG_MATH_EMULATION
- printk(KERN_EMERG "No coprocessor found and no math emulation present.\n");
- printk(KERN_EMERG "Giving up.\n");
- for (;;) ;
-#endif
- return;
- }
-
-/* trap_init() enabled FXSR and company _before_ testing for FP problems here. */
- /* Test for the divl bug.. */
- __asm__("fninit\n\t"
- "fldl %1\n\t"
- "fdivl %2\n\t"
- "fmull %2\n\t"
- "fldl %1\n\t"
- "fsubp %%st,%%st(1)\n\t"
- "fistpl %0\n\t"
- "fwait\n\t"
- "fninit"
- : "=m" (*&boot_cpu_data.fdiv_bug)
- : "m" (*&x), "m" (*&y));
- if (boot_cpu_data.fdiv_bug)
- printk("Hmm, FPU with FDIV bug.\n");
-}
-
-static void __init check_hlt(void)
-{
- if (paravirt_enabled())
- return;
-
- printk(KERN_INFO "Checking 'hlt' instruction... ");
- if (!boot_cpu_data.hlt_works_ok) {
- printk("disabled\n");
- return;
- }
- halt();
- halt();
- halt();
- halt();
- printk("OK.\n");
-}
-
-/*
- * Most 386 processors have a bug where a POPAD can lock the
- * machine even from user space.
- */
-
-static void __init check_popad(void)
-{
-#ifndef CONFIG_X86_POPAD_OK
- int res, inp = (int) &res;
-
- printk(KERN_INFO "Checking for popad bug... ");
- __asm__ __volatile__(
- "movl $12345678,%%eax; movl $0,%%edi; pusha; popa; movl (%%edx,%%edi),%%ecx "
- : "=&a" (res)
- : "d" (inp)
- : "ecx", "edi" );
- /* If this fails, it means that any user program may lock the CPU hard. Too bad. */
- if (res != 12345678) printk( "Buggy.\n" );
- else printk( "OK.\n" );
-#endif
-}
-
-/*
- * Check whether we are able to run this kernel safely on SMP.
- *
- * - In order to run on a i386, we need to be compiled for i386
- * (for due to lack of "invlpg" and working WP on a i386)
- * - In order to run on anything without a TSC, we need to be
- * compiled for a i486.
- * - In order to support the local APIC on a buggy Pentium machine,
- * we need to be compiled with CONFIG_X86_GOOD_APIC disabled,
- * which happens implicitly if compiled for a Pentium or lower
- * (unless an advanced selection of CPU features is used) as an
- * otherwise config implies a properly working local APIC without
- * the need to do extra reads from the APIC.
-*/
-
-static void __init check_config(void)
-{
-/*
- * We'd better not be a i386 if we're configured to use some
- * i486+ only features! (WP works in supervisor mode and the
- * new "invlpg" and "bswap" instructions)
- */
-#if defined(CONFIG_X86_WP_WORKS_OK) || defined(CONFIG_X86_INVLPG) || defined(CONFIG_X86_BSWAP)
- if (boot_cpu_data.x86 == 3)
- panic("Kernel requires i486+ for 'invlpg' and other features");
-#endif
-
-/*
- * If we configured ourselves for a TSC, we'd better have one!
- */
-#ifdef CONFIG_X86_TSC
- if (!cpu_has_tsc && !tsc_disable)
- panic("Kernel compiled for Pentium+, requires TSC feature!");
-#endif
-
-/*
- * If we were told we had a good local APIC, check for buggy Pentia,
- * i.e. all B steppings and the C2 stepping of P54C when using their
- * integrated APIC (see 11AP erratum in "Pentium Processor
- * Specification Update").
- */
-#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_GOOD_APIC)
- if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL
- && cpu_has_apic
- && boot_cpu_data.x86 == 5
- && boot_cpu_data.x86_model == 2
- && (boot_cpu_data.x86_mask < 6 || boot_cpu_data.x86_mask == 11))
- panic("Kernel compiled for PMMX+, assumes a local APIC without the read-before-write bug!");
-#endif
-}
-
-extern void alternative_instructions(void);
-
-static void __init check_bugs(void)
-{
- identify_cpu(&boot_cpu_data);
-#ifndef CONFIG_SMP
- printk("CPU: ");
- print_cpu_info(&boot_cpu_data);
-#endif
- check_config();
- check_fpu();
- check_hlt();
- check_popad();
- init_utsname()->machine[1] = '0' + (boot_cpu_data.x86 > 6 ? 6 : boot_cpu_data.x86);
- alternative_instructions();
-}
+#endif /* _ASM_I386_BUG_H */
--
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
