Hi,
Excuse me if this has been covered or fixed, I couldn't find anything in
the archives.
I upgraded from 2.6.11.7 to 2.6.20.1 today and found all the drives
connected to 2 brands of sata_sil sata controllers not working. The
drives are also (now) of various brands, Maxtor 300GB and 500GB
Seagates.
On boot (or after modprobing sata_sil if not configured to load in my
initrd), I get the below messages in dmesg and no drives showing up
in /dev.
There's 4 drives total, and 6 BUGs so I'm a little confused. One of the
drive (old sdb, which happened to be the first drive on sata_sil
controllers) is known to have bad sectors, but I didn't think it could
cause this... I'm away from the machine currently, so I haven't tested a
single drive to see if it fails also.
I rebooted back into 2.6.11.7 and everything was peachy (minus the known
bad disk).
Any suggestions or hints to more data I could provide to be diagnosed?
Thanks,
Dale
***************
ata3: SATA max UDMA/100 cmd 0xF8848080 ctl 0xF884808A bmdma 0xF8848000
irq 18
ata4: SATA max UDMA/100 cmd 0xF88480C0 ctl 0xF88480CA bmdma 0xF8848008
irq 18
scsi2 : sata_sil
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
BUG: at drivers/ata/libata-core.c:4365 ata_hsm_move()
[<f882c9ae>] ata_hsm_move+0x1be/0x7d0 [libata]
[<c033eb42>] schedule_timeout+0x52/0xd0
[<c0130170>] process_timeout+0x0/0x10
[<f882fe97>] ata_pio_task+0x27/0x100 [libata]
[<c01378d3>] run_workqueue+0x93/0x140
[<f882fe70>] ata_pio_task+0x0/0x100 [libata]
[<c0138447>] worker_thread+0x147/0x170
[<c0121360>] default_wake_function+0x0/0x10
[<c0138300>] worker_thread+0x0/0x170
[<c013b2eb>] kthread+0xbb/0xf0
[<c013b230>] kthread+0x0/0xf0
[<c0103e4f>] kernel_thread_helper+0x7/0x18
=======================
ata3.00: zero err_mask for failed internal command, assuming
AC_ERR_OTHER
ata3.00: failed to IDENTIFY (I/O error, err_mask=0x100)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
BUG: at drivers/ata/libata-core.c:4365 ata_hsm_move()
[<f882c9ae>] ata_hsm_move+0x1be/0x7d0 [libata]
[<c033eb42>] schedule_timeout+0x52/0xd0
[<c011e519>] __wake_up_common+0x39/0x70
[<c0130170>] process_timeout+0x0/0x10
[<f882fe97>] ata_pio_task+0x27/0x100 [libata]
[<c01378d3>] run_workqueue+0x93/0x140
[<f882fe70>] ata_pio_task+0x0/0x100 [libata]
[<c0138447>] worker_thread+0x147/0x170
[<c0121360>] default_wake_function+0x0/0x10
[<c0138300>] worker_thread+0x0/0x170
[<c013b2eb>] kthread+0xbb/0xf0
[<c013b230>] kthread+0x0/0xf0
[<c0103e4f>] kernel_thread_helper+0x7/0x18
=======================
ata3.00: zero err_mask for failed internal command, assuming
AC_ERR_OTHER
ata3.00: failed to IDENTIFY (I/O error, err_mask=0x100)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
BUG: at drivers/ata/libata-core.c:4365 ata_hsm_move()
[<f882c9ae>] ata_hsm_move+0x1be/0x7d0 [libata]
[<c033eb42>] schedule_timeout+0x52/0xd0
[<c011e519>] __wake_up_common+0x39/0x70
[<c0130170>] process_timeout+0x0/0x10
[<f882fe97>] ata_pio_task+0x27/0x100 [libata]
[<c01378d3>] run_workqueue+0x93/0x140
[<f882fe70>] ata_pio_task+0x0/0x100 [libata]
[<c0138447>] worker_thread+0x147/0x170
[<c0121360>] default_wake_function+0x0/0x10
[<c0138300>] worker_thread+0x0/0x170
[<c013b2eb>] kthread+0xbb/0xf0
[<c013b230>] kthread+0x0/0xf0
[<c0103e4f>] kernel_thread_helper+0x7/0x18
=======================
ata3.00: zero err_mask for failed internal command, assuming
AC_ERR_OTHER
ata3.00: failed to IDENTIFY (I/O error, err_mask=0x100)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
scsi3 : sata_sil
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
BUG: at drivers/ata/libata-core.c:4365 ata_hsm_move()
[<f882c9ae>] ata_hsm_move+0x1be/0x7d0 [libata]
[<c033eb42>] schedule_timeout+0x52/0xd0
[<c011e519>] __wake_up_common+0x39/0x70
[<c0130170>] process_timeout+0x0/0x10
[<f882fe97>] ata_pio_task+0x27/0x100 [libata]
[<c01378d3>] run_workqueue+0x93/0x140
[<f882fe70>] ata_pio_task+0x0/0x100 [libata]
[<c0138447>] worker_thread+0x147/0x170
[<c0121360>] default_wake_function+0x0/0x10
[<c0138300>] worker_thread+0x0/0x170
[<c013b2eb>] kthread+0xbb/0xf0
[<c013b230>] kthread+0x0/0xf0
[<c0103e4f>] kernel_thread_helper+0x7/0x18
=======================
ata4.00: zero err_mask for failed internal command, assuming
AC_ERR_OTHER
ata4.00: failed to IDENTIFY (I/O error, err_mask=0x100)
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
BUG: at drivers/ata/libata-core.c:4365 ata_hsm_move()
[<f882c9ae>] ata_hsm_move+0x1be/0x7d0 [libata]
[<c033eb42>] schedule_timeout+0x52/0xd0
[<c011e519>] __wake_up_common+0x39/0x70
[<c0130170>] process_timeout+0x0/0x10
[<f882fe97>] ata_pio_task+0x27/0x100 [libata]
[<c01378d3>] run_workqueue+0x93/0x140
[<f882fe70>] ata_pio_task+0x0/0x100 [libata]
[<c0138447>] worker_thread+0x147/0x170
[<c0121360>] default_wake_function+0x0/0x10
[<c0138300>] worker_thread+0x0/0x170
[<c013b2eb>] kthread+0xbb/0xf0
[<c013b230>] kthread+0x0/0xf0
[<c0103e4f>] kernel_thread_helper+0x7/0x18
=======================
ata4.00: zero err_mask for failed internal command, assuming
AC_ERR_OTHER
ata4.00: failed to IDENTIFY (I/O error, err_mask=0x100)
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
BUG: at drivers/ata/libata-core.c:4365 ata_hsm_move()
[<f882c9ae>] ata_hsm_move+0x1be/0x7d0 [libata]
[<c033eb42>] schedule_timeout+0x52/0xd0
[<c011e519>] __wake_up_common+0x39/0x70
[<c0130170>] process_timeout+0x0/0x10
[<f882fe97>] ata_pio_task+0x27/0x100 [libata]
[<c01378d3>] run_workqueue+0x93/0x140
[<f882fe70>] ata_pio_task+0x0/0x100 [libata]
[<c0138447>] worker_thread+0x147/0x170
[<c0121360>] default_wake_function+0x0/0x10
[<c0138300>] worker_thread+0x0/0x170
[<c013b2eb>] kthread+0xbb/0xf0
[<c013b230>] kthread+0x0/0xf0
[<c0103e4f>] kernel_thread_helper+0x7/0x18
=======================
ata4.00: zero err_mask for failed internal command, assuming
AC_ERR_OTHER
ata4.00: failed to IDENTIFY (I/O error, err_mask=0x100)
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
