Hi Justin,
I'm not a RAID or kernel developer, but .. do you have enough RAM to
support a 32mb stripe_cache_size?! Here on my 7*250Gb SW RAID5 array,
decreasing a stripe_cache_size of 8192 to 4096 frees up no less than
120mb of RAM. Using that as a calculation tool, a 32mb stripe_cache_size
would require approximately 960mb of RAM! My RAID box only has 1Gb of
RAM, so I'm not game to test such a thing. Others on these lists would
definitely have a good idea on what's happening :-)
Cheers,
Jason
On Fri, 2007-02-23 at 06:41 -0500, Justin Piszcz wrote:
> Each of these are averaged over three runs with 6 SATA disks in a SW RAID
> 5 configuration:
>
> (dd if=/dev/zero of=file_1 bs=1M count=2000)
>
> 128k_stripe: 69.2MB/s
> 256k_stripe: 105.3MB/s
> 512k_stripe: 142.0MB/s
> 1024k_stripe: 144.6MB/s
> 2048k_stripe: 208.3MB/s
> 4096k_stripe: 223.6MB/s
> 8192k_stripe: 226.0MB/s
> 16384k_stripe: 215.0MB/s
>
> When I tried a 32768k stripe, this happened:
> p34:~# echo 32768 > /sys/block/md4/md/stripe_cache_size
> Connection to p34 closed
>
> I was able to Alt-SysRQ+b but I could not access the console/X/etc, it
> appeared to be frozen.
>
> FYI.
>
> Justin.
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-raid" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]