This is what is pending for upstream, when patch flow restarts.
The 'upstream-fixes' branch of
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev.git upstream-fixes
contains the following updates:
drivers/ata/Kconfig | 9 +
drivers/ata/Makefile | 1 +
drivers/ata/ahci.c | 28 +-
drivers/ata/ata_piix.c | 2 -
drivers/ata/libata-acpi.c | 20 +-
drivers/ata/libata-core.c | 200 ++++---
drivers/ata/libata-eh.c | 220 +++++---
drivers/ata/libata-scsi.c | 44 +-
drivers/ata/libata-sff.c | 2 +-
drivers/ata/libata.h | 13 +-
drivers/ata/pata_cs5520.c | 26 +-
drivers/ata/pata_ixp4xx_cf.c | 7 +-
drivers/ata/pata_oldpiix.c | 5 +-
drivers/ata/pata_pcmcia.c | 7 +-
drivers/ata/pata_platform.c | 1 +
drivers/ata/pata_rz1000.c | 1 +
drivers/ata/pata_scc.c | 1228 ++++++++++++++++++++++++++++++++++++++++++
drivers/ata/pata_sil680.c | 14 +-
drivers/ata/pata_sis.c | 7 +-
drivers/ata/pata_sl82c105.c | 39 +-
drivers/ata/pdc_adma.c | 2 +-
drivers/ata/sata_mv.c | 4 +-
drivers/ata/sata_nv.c | 226 ++++-----
drivers/ata/sata_qstor.c | 2 +-
drivers/ata/sata_sil.c | 2 +-
drivers/ata/sata_sis.c | 3 +-
drivers/ata/sata_sx4.c | 14 +-
drivers/ata/sata_via.c | 22 +-
drivers/ata/sis.h | 5 +
include/linux/ata.h | 8 +-
include/linux/libata.h | 25 +-
31 files changed, 1783 insertions(+), 404 deletions(-)
create mode 100644 drivers/ata/pata_scc.c
create mode 100644 drivers/ata/sis.h
Akira Iguchi (1):
libata: PATA driver for Celleb
Alan Cox (7):
SiS warning fixes
pata: Display Configuring .. lines for devices with private set_mode methods
pata_cs5520: suspend/resume
pata_ixp4xx: Fix up set_mode() function and display Configured for PIO info
pata_oldpiix: Call both PIO and DMA setup functions on switch as they are called on set up
pata_sil680: Assorted fixes
pata_sl82c105: remove un-needed code paths
Jeff Garzik (2):
libata: Fix Cell SATA driver dependencies
[libata] ata_piix: remove duplicate PCI IDs
Magnus Damm (2):
pata_pcmcia: Update device table
libata: Remove duplicate dma blacklist entry
Mark Lord (1):
libata bugfix: HDIO_DRIVE_TASK
Randy Dunlap (1):
SATA: use NULL for ptrs
Robert Hancock (9):
sata_nv: add back some verbosity into ADMA error_handler
sata_nv: delay on switching between NCQ and non-NCQ commands
sata_nv: Add CPB register info to error_handler output
sata_nv: cleanup CPB and APRD initialization
sata_nv: Cleanup taskfile setup
sata_nv: Use notifier for completion checks
sata_nv: enable hotplug interrupt and fix some readl/readw mismatches
sata_nv: kill old private BMDMA helper functions
sata_nv: complain on spurious completion notifiers
Tejun Heo (14):
libata: improve ata_down_xfermask_limit()
libata: improve probe failure handling
libata: put some intelligence into EH speed down sequence
libata: kill ATA_DNXFER_ANY
libata: fix probe_ent alloc/free bugs
libata: disable pdev on all suspend events
libata: separate out ata_ncq_enabled()
libata: fix ata_scmd_need_defer()
libata: fix ata_scsi_change_queue_depth()
sata_via: fix resource-managed iomap conversion
libata: s/ap->id/ap->print_id/g
ahci: consider SDB FIS containing spurious NCQ completions HSM violation (regenerated)
libata: fix remaining ap->id
libata: test major version in ata_id_is_sata()
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 4af0a4b..d16b5b0 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -562,6 +562,15 @@ config PATA_IXP4XX_CF
If unsure, say N.
+config PATA_SCC
+ tristate "Toshiba's Cell Reference Set IDE support"
+ depends on PCI && PPC_IBM_CELL_BLADE
+ help
+ This option enables support for the built-in IDE controller on
+ Toshiba Cell Reference Board.
+
+ If unsure, say N.
+
endif
endmenu
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 74298af..13d7397 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -59,6 +59,7 @@ obj-$(CONFIG_PATA_WINBOND_VLB) += pata_winbond.o
obj-$(CONFIG_PATA_SIS) += pata_sis.o
obj-$(CONFIG_PATA_TRIFLEX) += pata_triflex.o
obj-$(CONFIG_PATA_IXP4XX_CF) += pata_ixp4xx_cf.o
+obj-$(CONFIG_PATA_SCC) += pata_scc.o
obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o
# Should be last but one libata driver
obj-$(CONFIG_ATA_GENERIC) += ata_generic.o
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 6a3543e..334f54c 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -198,7 +198,6 @@ struct ahci_port_priv {
void *rx_fis;
dma_addr_t rx_fis_dma;
/* for NCQ spurious interrupt analysis */
- int ncq_saw_spurious_sdb_cnt;
unsigned int ncq_saw_d2h:1;
unsigned int ncq_saw_dmas:1;
};
@@ -1160,23 +1159,24 @@ static void ahci_host_intr(struct ata_port *ap)
known_irq = 1;
}
- if (status & PORT_IRQ_SDB_FIS &&
- pp->ncq_saw_spurious_sdb_cnt < 10) {
+ if (status & PORT_IRQ_SDB_FIS) {
/* SDB FIS containing spurious completions might be
- * dangerous, we need to know more about them. Print
- * more of it.
- */
+ * dangerous, whine and fail commands with HSM
+ * violation. EH will turn off NCQ after several such
+ * failures.
+ */
const __le32 *f = pp->rx_fis + RX_FIS_SDB;
- ata_port_printk(ap, KERN_INFO, "Spurious SDB FIS during NCQ "
- "issue=0x%x SAct=0x%x FIS=%08x:%08x%s\n",
- readl(port_mmio + PORT_CMD_ISSUE),
- readl(port_mmio + PORT_SCR_ACT),
- le32_to_cpu(f[0]), le32_to_cpu(f[1]),
- pp->ncq_saw_spurious_sdb_cnt < 10 ?
- "" : ", shutting up");
+ ata_ehi_push_desc(ehi, "spurious completion during NCQ "
+ "issue=0x%x SAct=0x%x FIS=%08x:%08x",
+ readl(port_mmio + PORT_CMD_ISSUE),
+ readl(port_mmio + PORT_SCR_ACT),
+ le32_to_cpu(f[0]), le32_to_cpu(f[1]));
+
+ ehi->err_mask |= AC_ERR_HSM;
+ ehi->action |= ATA_EH_SOFTRESET;
+ ata_port_freeze(ap);
- pp->ncq_saw_spurious_sdb_cnt++;
known_irq = 1;
}
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 4d716c7..97bad15 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -169,8 +169,6 @@ static const struct pci_device_id piix_pci_tbl[] = {
/* Intel PIIX4 for the 430TX/440BX/MX chipset: UDMA 33 */
/* Also PIIX4E (fn3 rev 2) and PIIX4M (fn3 rev 3) */
{ 0x8086, 0x7111, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix_pata_33 },
- { 0x8086, 0x24db, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
- { 0x8086, 0x25a2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
/* Intel PIIX4 */
{ 0x8086, 0x7199, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix_pata_33 },
/* Intel PIIX4 */
diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index b4e8be5..1bdf7a2 100644
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -294,9 +294,8 @@ static int do_drive_get_GTF(struct ata_port *ap, int ix,
return 0;
if (ata_msg_probe(ap))
- ata_dev_printk(atadev, KERN_DEBUG,
- "%s: ENTER: ap->id: %d, port#: %d\n",
- __FUNCTION__, ap->id, ap->port_no);
+ ata_dev_printk(atadev, KERN_DEBUG, "%s: ENTER: port#: %d\n",
+ __FUNCTION__, ap->port_no);
if (!ata_dev_enabled(atadev) || (ap->flags & ATA_FLAG_DISABLED)) {
if (ata_msg_probe(ap))
@@ -521,9 +520,8 @@ static int do_drive_set_taskfiles(struct ata_port *ap,
struct taskfile_array *gtf;
if (ata_msg_probe(ap))
- ata_dev_printk(atadev, KERN_DEBUG,
- "%s: ENTER: ap->id: %d, port#: %d\n",
- __FUNCTION__, ap->id, ap->port_no);
+ ata_dev_printk(atadev, KERN_DEBUG, "%s: ENTER: port#: %d\n",
+ __FUNCTION__, ap->port_no);
if (noacpi || !(ap->cbl == ATA_CBL_SATA))
return 0;
@@ -627,9 +625,8 @@ int ata_acpi_push_id(struct ata_port *ap, unsigned int ix)
return 0;
if (ata_msg_probe(ap))
- ata_dev_printk(atadev, KERN_DEBUG,
- "%s: ap->id: %d, ix = %d, port#: %d\n",
- __FUNCTION__, ap->id, ix, ap->port_no);
+ ata_dev_printk(atadev, KERN_DEBUG, "%s: ix = %d, port#: %d\n",
+ __FUNCTION__, ix, ap->port_no);
/* Don't continue if not a SATA device. */
if (!(ap->cbl == ATA_CBL_SATA)) {
@@ -685,9 +682,8 @@ int ata_acpi_push_id(struct ata_port *ap, unsigned int ix)
if (err < 0) {
if (ata_msg_probe(ap))
ata_dev_printk(atadev, KERN_DEBUG,
- "ata%u(%u): %s _SDD error: status = 0x%x\n",
- ap->id, ap->device->devno,
- __FUNCTION__, status);
+ "%s _SDD error: status = 0x%x\n",
+ __FUNCTION__, status);
}
/* always return success */
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index e900c5e..d3b4e25 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -72,7 +72,7 @@ static unsigned int ata_dev_init_params(struct ata_device *dev,
static unsigned int ata_dev_set_xfermode(struct ata_device *dev);
static void ata_dev_xfermask(struct ata_device *dev);
-static unsigned int ata_unique_id = 1;
+static unsigned int ata_print_id = 1;
static struct workqueue_struct *ata_wq;
struct workqueue_struct *ata_aux_wq;
@@ -315,9 +315,7 @@ int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev,
tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
tf->flags |= tf_flags;
- if ((dev->flags & (ATA_DFLAG_PIO | ATA_DFLAG_NCQ_OFF |
- ATA_DFLAG_NCQ)) == ATA_DFLAG_NCQ &&
- likely(tag != ATA_TAG_INTERNAL)) {
+ if (ata_ncq_enabled(dev) && likely(tag != ATA_TAG_INTERNAL)) {
/* yay, NCQ */
if (!lba_48_ok(block, n_block))
return -ERANGE;
@@ -600,6 +598,8 @@ void ata_dev_disable(struct ata_device *dev)
{
if (ata_dev_enabled(dev) && ata_msg_drv(dev->ap)) {
ata_dev_printk(dev, KERN_WARNING, "disabled\n");
+ ata_down_xfermask_limit(dev, ATA_DNXFER_FORCE_PIO0 |
+ ATA_DNXFER_QUIET);
dev->class++;
}
}
@@ -708,7 +708,7 @@ unsigned int ata_dev_classify(const struct ata_taskfile *tf)
* Device type - %ATA_DEV_ATA, %ATA_DEV_ATAPI or %ATA_DEV_NONE.
*/
-static unsigned int
+unsigned int
ata_dev_try_classify(struct ata_port *ap, unsigned int device, u8 *r_err)
{
struct ata_taskfile tf;
@@ -891,8 +891,8 @@ void ata_dev_select(struct ata_port *ap, unsigned int device,
unsigned int wait, unsigned int can_sleep)
{
if (ata_msg_probe(ap))
- ata_port_printk(ap, KERN_INFO, "ata_dev_select: ENTER, ata%u: "
- "device %u, wait %u\n", ap->id, device, wait);
+ ata_port_printk(ap, KERN_INFO, "ata_dev_select: ENTER, "
+ "device %u, wait %u\n", device, wait);
if (wait)
ata_wait_idle(ap);
@@ -1392,8 +1392,7 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
int rc;
if (ata_msg_ctl(ap))
- ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER, host %u, dev %u\n",
- __FUNCTION__, ap->id, dev->devno);
+ ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER\n", __FUNCTION__);
ata_dev_select(ap, dev->devno, 1, 1); /* select device 0/1 */
@@ -1430,7 +1429,7 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
if (err_mask) {
if (err_mask & AC_ERR_NODEV_HINT) {
DPRINTK("ata%u.%d: NODEV after polling detection\n",
- ap->id, dev->devno);
+ ap->print_id, dev->devno);
return -ENOENT;
}
@@ -1558,15 +1557,13 @@ int ata_dev_configure(struct ata_device *dev)
int rc;
if (!ata_dev_enabled(dev) && ata_msg_info(ap)) {
- ata_dev_printk(dev, KERN_INFO,
- "%s: ENTER/EXIT (host %u, dev %u) -- nodev\n",
- __FUNCTION__, ap->id, dev->devno);
+ ata_dev_printk(dev, KERN_INFO, "%s: ENTER/EXIT -- nodev\n",
+ __FUNCTION__);
return 0;
}
if (ata_msg_probe(ap))
- ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER, host %u, dev %u\n",
- __FUNCTION__, ap->id, dev->devno);
+ ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER\n", __FUNCTION__);
/* set _SDD */
rc = ata_acpi_push_id(ap, dev->devno);
@@ -1610,8 +1607,9 @@ int ata_dev_configure(struct ata_device *dev)
if (dev->class == ATA_DEV_ATA) {
if (ata_id_is_cfa(id)) {
if (id[162] & 1) /* CPRM may make this media unusable */
- ata_dev_printk(dev, KERN_WARNING, "ata%u: device %u supports DRM functions and may not be fully accessable.\n",
- ap->id, dev->devno);
+ ata_dev_printk(dev, KERN_WARNING,
+ "supports DRM functions and may "
+ "not be fully accessable.\n");
snprintf(revbuf, 7, "CFA");
}
else
@@ -1778,7 +1776,7 @@ int ata_bus_probe(struct ata_port *ap)
{
unsigned int classes[ATA_MAX_DEVICES];
int tries[ATA_MAX_DEVICES];
- int i, rc, down_xfermask;
+ int i, rc;
struct ata_device *dev;
ata_port_probe(ap);
@@ -1787,8 +1785,6 @@ int ata_bus_probe(struct ata_port *ap)
tries[i] = ATA_PROBE_MAX_TRIES;
retry:
- down_xfermask = 0;
-
/* reset and determine device classes */
ap->ops->phy_reset(ap);
@@ -1836,10 +1832,8 @@ int ata_bus_probe(struct ata_port *ap)
/* configure transfer mode */
rc = ata_set_mode(ap, &dev);
- if (rc) {
- down_xfermask = 1;
+ if (rc)
goto fail;
- }
for (i = 0; i < ATA_MAX_DEVICES; i++)
if (ata_dev_enabled(&ap->device[i]))
@@ -1851,25 +1845,29 @@ int ata_bus_probe(struct ata_port *ap)
return -ENODEV;
fail:
+ tries[dev->devno]--;
+
switch (rc) {
case -EINVAL:
- case -ENODEV:
+ /* eeek, something went very wrong, give up */
tries[dev->devno] = 0;
break;
+
+ case -ENODEV:
+ /* give it just one more chance */
+ tries[dev->devno] = min(tries[dev->devno], 1);
case -EIO:
- sata_down_spd_limit(ap);
- /* fall through */
- default:
- tries[dev->devno]--;
- if (down_xfermask &&
- ata_down_xfermask_limit(dev, tries[dev->devno] == 1))
- tries[dev->devno] = 0;
+ if (tries[dev->devno] == 1) {
+ /* This is the last chance, better to slow
+ * down than lose it.
+ */
+ sata_down_spd_limit(ap);
+ ata_down_xfermask_limit(dev, ATA_DNXFER_PIO);
+ }
}
- if (!tries[dev->devno]) {
- ata_down_xfermask_limit(dev, 1);
+ if (!tries[dev->devno])
ata_dev_disable(dev);
- }
goto retry;
}
@@ -2300,7 +2298,7 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed,
/**
* ata_down_xfermask_limit - adjust dev xfer masks downward
* @dev: Device to adjust xfer masks
- * @force_pio0: Force PIO0
+ * @sel: ATA_DNXFER_* selector
*
* Adjust xfer masks of @dev downward. Note that this function
* does not apply the change. Invoking ata_set_mode() afterwards
@@ -2312,37 +2310,78 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed,
* RETURNS:
* 0 on success, negative errno on failure
*/
-int ata_down_xfermask_limit(struct ata_device *dev, int force_pio0)
+int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel)
{
- unsigned long xfer_mask;
- int highbit;
+ char buf[32];
+ unsigned int orig_mask, xfer_mask;
+ unsigned int pio_mask, mwdma_mask, udma_mask;
+ int quiet, highbit;
- xfer_mask = ata_pack_xfermask(dev->pio_mask, dev->mwdma_mask,
- dev->udma_mask);
+ quiet = !!(sel & ATA_DNXFER_QUIET);
+ sel &= ~ATA_DNXFER_QUIET;
- if (!xfer_mask)
- goto fail;
- /* don't gear down to MWDMA from UDMA, go directly to PIO */
- if (xfer_mask & ATA_MASK_UDMA)
- xfer_mask &= ~ATA_MASK_MWDMA;
+ xfer_mask = orig_mask = ata_pack_xfermask(dev->pio_mask,
+ dev->mwdma_mask,
+ dev->udma_mask);
+ ata_unpack_xfermask(xfer_mask, &pio_mask, &mwdma_mask, &udma_mask);
- highbit = fls(xfer_mask) - 1;
- xfer_mask &= ~(1 << highbit);
- if (force_pio0)
- xfer_mask &= 1 << ATA_SHIFT_PIO;
- if (!xfer_mask)
- goto fail;
+ switch (sel) {
+ case ATA_DNXFER_PIO:
+ highbit = fls(pio_mask) - 1;
+ pio_mask &= ~(1 << highbit);
+ break;
+
+ case ATA_DNXFER_DMA:
+ if (udma_mask) {
+ highbit = fls(udma_mask) - 1;
+ udma_mask &= ~(1 << highbit);
+ if (!udma_mask)
+ return -ENOENT;
+ } else if (mwdma_mask) {
+ highbit = fls(mwdma_mask) - 1;
+ mwdma_mask &= ~(1 << highbit);
+ if (!mwdma_mask)
+ return -ENOENT;
+ }
+ break;
+
+ case ATA_DNXFER_40C:
+ udma_mask &= ATA_UDMA_MASK_40C;
+ break;
+
+ case ATA_DNXFER_FORCE_PIO0:
+ pio_mask &= 1;
+ case ATA_DNXFER_FORCE_PIO:
+ mwdma_mask = 0;
+ udma_mask = 0;
+ break;
+
+ default:
+ BUG();
+ }
+
+ xfer_mask &= ata_pack_xfermask(pio_mask, mwdma_mask, udma_mask);
+
+ if (!(xfer_mask & ATA_MASK_PIO) || xfer_mask == orig_mask)
+ return -ENOENT;
+
+ if (!quiet) {
+ if (xfer_mask & (ATA_MASK_MWDMA | ATA_MASK_UDMA))
+ snprintf(buf, sizeof(buf), "%s:%s",
+ ata_mode_string(xfer_mask),
+ ata_mode_string(xfer_mask & ATA_MASK_PIO));
+ else
+ snprintf(buf, sizeof(buf), "%s",
+ ata_mode_string(xfer_mask));
+
+ ata_dev_printk(dev, KERN_WARNING,
+ "limiting speed to %s\n", buf);
+ }
ata_unpack_xfermask(xfer_mask, &dev->pio_mask, &dev->mwdma_mask,
&dev->udma_mask);
- ata_dev_printk(dev, KERN_WARNING, "limiting speed to %s\n",
- ata_mode_string(xfer_mask));
-
return 0;
-
- fail:
- return -EINVAL;
}
static int ata_dev_set_mode(struct ata_device *dev)
@@ -2609,7 +2648,7 @@ static unsigned int ata_bus_softreset(struct ata_port *ap,
{
struct ata_ioports *ioaddr = &ap->ioaddr;
- DPRINTK("ata%u: bus reset via SRST\n", ap->id);
+ DPRINTK("ata%u: bus reset via SRST\n", ap->print_id);
/* software reset. causes dev0 to be selected */
iowrite8(ap->ctl, ioaddr->ctl_addr);
@@ -2669,7 +2708,7 @@ void ata_bus_reset(struct ata_port *ap)
u8 err;
unsigned int dev0, dev1 = 0, devmask = 0;
- DPRINTK("ENTER, host %u, port %u\n", ap->id, ap->port_no);
+ DPRINTK("ENTER, host %u, port %u\n", ap->print_id, ap->port_no);
/* determine if device 0/1 are present */
if (ap->flags & ATA_FLAG_SATA_RESET)
@@ -3256,7 +3295,6 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
{ "WPI CDD-820", NULL, ATA_HORKAGE_NODMA },
{ "SAMSUNG CD-ROM SC-148C", NULL, ATA_HORKAGE_NODMA },
{ "SAMSUNG CD-ROM SC", NULL, ATA_HORKAGE_NODMA },
- { "SanDisk SDP3B-64", NULL, ATA_HORKAGE_NODMA },
{ "ATAPI CD-ROM DRIVE 40X MAXIMUM",NULL,ATA_HORKAGE_NODMA },
{ "_NEC DV5800A", NULL, ATA_HORKAGE_NODMA },
{ "SAMSUNG CD-ROM SN-124","N001", ATA_HORKAGE_NODMA },
@@ -3739,7 +3777,7 @@ static int ata_sg_setup(struct ata_queued_cmd *qc)
struct scatterlist *lsg = &sg[qc->n_elem - 1];
int n_elem, pre_n_elem, dir, trim_sg = 0;
- VPRINTK("ENTER, ata%u\n", ap->id);
+ VPRINTK("ENTER, ata%u\n", ap->print_id);
WARN_ON(!(qc->flags & ATA_QCFLAG_SG));
/* we must lengthen transfers to end on a 32-bit boundary */
@@ -4140,7 +4178,7 @@ static void atapi_pio_bytes(struct ata_queued_cmd *qc)
if (do_write != i_write)
goto err_out;
- VPRINTK("ata%u: xfering %d bytes\n", ap->id, bytes);
+ VPRINTK("ata%u: xfering %d bytes\n", ap->print_id, bytes);
__atapi_pio_bytes(qc, bytes);
@@ -4257,7 +4295,7 @@ int ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc,
fsm_start:
DPRINTK("ata%u: protocol %d task_state %d (dev_stat 0x%X)\n",
- ap->id, qc->tf.protocol, ap->hsm_task_state, status);
+ ap->print_id, qc->tf.protocol, ap->hsm_task_state, status);
switch (ap->hsm_task_state) {
case HSM_ST_FIRST:
@@ -4290,8 +4328,8 @@ fsm_start:
* let the EH abort the command or reset the device.
*/
if (unlikely(status & (ATA_ERR | ATA_DF))) {
- printk(KERN_WARNING "ata%d: DRQ=1 with device error, dev_stat 0x%X\n",
- ap->id, status);
+ ata_port_printk(ap, KERN_WARNING, "DRQ=1 with device "
+ "error, dev_stat 0x%X\n", status);
qc->err_mask |= AC_ERR_HSM;
ap->hsm_task_state = HSM_ST_ERR;
goto fsm_start;
@@ -4348,8 +4386,9 @@ fsm_start:
* let the EH abort the command or reset the device.
*/
if (unlikely(status & (ATA_ERR | ATA_DF))) {
- printk(KERN_WARNING "ata%d: DRQ=1 with device error, dev_stat 0x%X\n",
- ap->id, status);
+ ata_port_printk(ap, KERN_WARNING, "DRQ=1 with "
+ "device error, dev_stat 0x%X\n",
+ status);
qc->err_mask |= AC_ERR_HSM;
ap->hsm_task_state = HSM_ST_ERR;
goto fsm_start;
@@ -4435,7 +4474,7 @@ fsm_start:
/* no more data to transfer */
DPRINTK("ata%u: dev %u command complete, drv_stat 0x%x\n",
- ap->id, qc->dev->devno, status);
+ ap->print_id, qc->dev->devno, status);
WARN_ON(qc->err_mask);
@@ -4977,7 +5016,7 @@ inline unsigned int ata_host_intr (struct ata_port *ap,
u8 status, host_stat = 0;
VPRINTK("ata%u: protocol %d task_state %d\n",
- ap->id, qc->tf.protocol, ap->hsm_task_state);
+ ap->print_id, qc->tf.protocol, ap->hsm_task_state);
/* Check whether we are expecting interrupt in this state */
switch (ap->hsm_task_state) {
@@ -4998,7 +5037,8 @@ inline unsigned int ata_host_intr (struct ata_port *ap,
qc->tf.protocol == ATA_PROT_ATAPI_DMA) {
/* check status of DMA engine */
host_stat = ap->ops->bmdma_status(ap);
- VPRINTK("ata%u: host_stat 0x%X\n", ap->id, host_stat);
+ VPRINTK("ata%u: host_stat 0x%X\n",
+ ap->print_id, host_stat);
/* if it's not our irq... */
if (!(host_stat & ATA_DMA_INTR))
@@ -5457,7 +5497,7 @@ void ata_port_init(struct ata_port *ap, struct ata_host *host,
ap->lock = &host->lock;
ap->flags = ATA_FLAG_DISABLED;
- ap->id = ata_unique_id++;
+ ap->print_id = ata_print_id++;
ap->ctl = ATA_DEVCTL_OBS;
ap->host = host;
ap->dev = ent->dev;
@@ -5528,7 +5568,7 @@ static void ata_port_init_shost(struct ata_port *ap, struct Scsi_Host *shost)
{
ap->scsi_host = shost;
- shost->unique_id = ap->id;
+ shost->unique_id = ap->print_id;
shost->max_id = 16;
shost->max_lun = 1;
shost->max_channel = 1;
@@ -5792,9 +5832,9 @@ int ata_device_add(const struct ata_probe_ent *ent)
/* wait for EH to finish */
ata_port_wait_eh(ap);
} else {
- DPRINTK("ata%u: bus probe begin\n", ap->id);
+ DPRINTK("ata%u: bus probe begin\n", ap->print_id);
rc = ata_bus_probe(ap);
- DPRINTK("ata%u: bus probe end\n", ap->id);
+ DPRINTK("ata%u: bus probe end\n", ap->print_id);
if (rc) {
/* FIXME: do something useful here?
@@ -5905,11 +5945,7 @@ ata_probe_ent_alloc(struct device *dev, const struct ata_port_info *port)
{
struct ata_probe_ent *probe_ent;
- /* XXX - the following if can go away once all LLDs are managed */
- if (!list_empty(&dev->devres_head))
- probe_ent = devm_kzalloc(dev, sizeof(*probe_ent), GFP_KERNEL);
- else
- probe_ent = kzalloc(sizeof(*probe_ent), GFP_KERNEL);
+ probe_ent = devm_kzalloc(dev, sizeof(*probe_ent), GFP_KERNEL);
if (!probe_ent) {
printk(KERN_ERR DRV_NAME "(%s): out of memory\n",
kobject_name(&(dev->kobj)));
@@ -6015,11 +6051,10 @@ int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits)
void ata_pci_device_do_suspend(struct pci_dev *pdev, pm_message_t mesg)
{
pci_save_state(pdev);
+ pci_disable_device(pdev);
- if (mesg.event == PM_EVENT_SUSPEND) {
- pci_disable_device(pdev);
+ if (mesg.event == PM_EVENT_SUSPEND)
pci_set_power_state(pdev, PCI_D3hot);
- }
}
int ata_pci_device_do_resume(struct pci_dev *pdev)
@@ -6311,3 +6346,4 @@ EXPORT_SYMBOL_GPL(ata_irq_on);
EXPORT_SYMBOL_GPL(ata_dummy_irq_on);
EXPORT_SYMBOL_GPL(ata_irq_ack);
EXPORT_SYMBOL_GPL(ata_dummy_irq_ack);
+EXPORT_SYMBOL_GPL(ata_dev_try_classify);
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 52c85af..cad0d6d 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -44,6 +44,12 @@
#include "libata.h"
+enum {
+ ATA_EH_SPDN_NCQ_OFF = (1 << 0),
+ ATA_EH_SPDN_SPEED_DOWN = (1 << 1),
+ ATA_EH_SPDN_FALLBACK_TO_PIO = (1 << 2),
+};
+
static void __ata_port_freeze(struct ata_port *ap);
static void ata_eh_finish(struct ata_port *ap);
static void ata_eh_handle_port_suspend(struct ata_port *ap);
@@ -65,12 +71,9 @@ static void ata_ering_record(struct ata_ering *ering, int is_io,
ent->timestamp = get_jiffies_64();
}
-static struct ata_ering_entry * ata_ering_top(struct ata_ering *ering)
+static void ata_ering_clear(struct ata_ering *ering)
{
- struct ata_ering_entry *ent = &ering->ring[ering->cursor];
- if (!ent->err_mask)
- return NULL;
- return ent;
+ memset(ering, 0, sizeof(*ering));
}
static int ata_ering_map(struct ata_ering *ering,
@@ -585,7 +588,7 @@ static void __ata_port_freeze(struct ata_port *ap)
ap->pflags |= ATA_PFLAG_FROZEN;
- DPRINTK("ata%u port frozen\n", ap->id);
+ DPRINTK("ata%u port frozen\n", ap->print_id);
}
/**
@@ -658,7 +661,7 @@ void ata_eh_thaw_port(struct ata_port *ap)
spin_unlock_irqrestore(ap->lock, flags);
- DPRINTK("ata%u port thawed\n", ap->id);
+ DPRINTK("ata%u port thawed\n", ap->print_id);
}
static void ata_eh_scsidone(struct scsi_cmnd *scmd)
@@ -1159,87 +1162,99 @@ static unsigned int ata_eh_analyze_tf(struct ata_queued_cmd *qc,
return action;
}
-static int ata_eh_categorize_ering_entry(struct ata_ering_entry *ent)
+static int ata_eh_categorize_error(int is_io, unsigned int err_mask)
{
- if (ent->err_mask & (AC_ERR_ATA_BUS | AC_ERR_TIMEOUT))
+ if (err_mask & AC_ERR_ATA_BUS)
return 1;
- if (ent->is_io) {
- if (ent->err_mask & AC_ERR_HSM)
- return 1;
- if ((ent->err_mask &
- (AC_ERR_DEV|AC_ERR_MEDIA|AC_ERR_INVALID)) == AC_ERR_DEV)
+ if (err_mask & AC_ERR_TIMEOUT)
+ return 2;
+
+ if (is_io) {
+ if (err_mask & AC_ERR_HSM)
return 2;
+ if ((err_mask &
+ (AC_ERR_DEV|AC_ERR_MEDIA|AC_ERR_INVALID)) == AC_ERR_DEV)
+ return 3;
}
return 0;
}
-struct speed_down_needed_arg {
+struct speed_down_verdict_arg {
u64 since;
- int nr_errors[3];
+ int nr_errors[4];
};
-static int speed_down_needed_cb(struct ata_ering_entry *ent, void *void_arg)
+static int speed_down_verdict_cb(struct ata_ering_entry *ent, void *void_arg)
{
- struct speed_down_needed_arg *arg = void_arg;
+ struct speed_down_verdict_arg *arg = void_arg;
+ int cat = ata_eh_categorize_error(ent->is_io, ent->err_mask);
if (ent->timestamp < arg->since)
return -1;
- arg->nr_errors[ata_eh_categorize_ering_entry(ent)]++;
+ arg->nr_errors[cat]++;
return 0;
}
/**
- * ata_eh_speed_down_needed - Determine wheter speed down is necessary
+ * ata_eh_speed_down_verdict - Determine speed down verdict
* @dev: Device of interest
*
* This function examines error ring of @dev and determines
- * whether speed down is necessary. Speed down is necessary if
- * there have been more than 3 of Cat-1 errors or 10 of Cat-2
- * errors during last 15 minutes.
+ * whether NCQ needs to be turned off, transfer speed should be
+ * stepped down, or falling back to PIO is necessary.
*
- * Cat-1 errors are ATA_BUS, TIMEOUT for any command and HSM
- * violation for known supported commands.
+ * Cat-1 is ATA_BUS error for any command.
*
- * Cat-2 errors are unclassified DEV error for known supported
+ * Cat-2 is TIMEOUT for any command or HSM violation for known
+ * supported commands.
+ *
+ * Cat-3 is is unclassified DEV error for known supported
* command.
*
+ * NCQ needs to be turned off if there have been more than 3
+ * Cat-2 + Cat-3 errors during last 10 minutes.
+ *
+ * Speed down is necessary if there have been more than 3 Cat-1 +
+ * Cat-2 errors or 10 Cat-3 errors during last 10 minutes.
+ *
+ * Falling back to PIO mode is necessary if there have been more
+ * than 10 Cat-1 + Cat-2 + Cat-3 errors during last 5 minutes.
+ *
* LOCKING:
* Inherited from caller.
*
* RETURNS:
- * 1 if speed down is necessary, 0 otherwise
+ * OR of ATA_EH_SPDN_* flags.
*/
-static int ata_eh_speed_down_needed(struct ata_device *dev)
+static unsigned int ata_eh_speed_down_verdict(struct ata_device *dev)
{
- const u64 interval = 15LLU * 60 * HZ;
- static const int err_limits[3] = { -1, 3, 10 };
- struct speed_down_needed_arg arg;
- struct ata_ering_entry *ent;
- int err_cat;
- u64 j64;
+ const u64 j5mins = 5LLU * 60 * HZ, j10mins = 10LLU * 60 * HZ;
+ u64 j64 = get_jiffies_64();
+ struct speed_down_verdict_arg arg;
+ unsigned int verdict = 0;
- ent = ata_ering_top(&dev->ering);
- if (!ent)
- return 0;
+ /* scan past 10 mins of error history */
+ memset(&arg, 0, sizeof(arg));
+ arg.since = j64 - min(j64, j10mins);
+ ata_ering_map(&dev->ering, speed_down_verdict_cb, &arg);
- err_cat = ata_eh_categorize_ering_entry(ent);
- if (err_cat == 0)
- return 0;
+ if (arg.nr_errors[2] + arg.nr_errors[3] > 3)
+ verdict |= ATA_EH_SPDN_NCQ_OFF;
+ if (arg.nr_errors[1] + arg.nr_errors[2] > 3 || arg.nr_errors[3] > 10)
+ verdict |= ATA_EH_SPDN_SPEED_DOWN;
+ /* scan past 3 mins of error history */
memset(&arg, 0, sizeof(arg));
+ arg.since = j64 - min(j64, j5mins);
+ ata_ering_map(&dev->ering, speed_down_verdict_cb, &arg);
- j64 = get_jiffies_64();
- if (j64 >= interval)
- arg.since = j64 - interval;
- else
- arg.since = 0;
-
- ata_ering_map(&dev->ering, speed_down_needed_cb, &arg);
+ if (arg.nr_errors[1] + arg.nr_errors[2] + arg.nr_errors[3] > 10)
+ verdict |= ATA_EH_SPDN_FALLBACK_TO_PIO;
- return arg.nr_errors[err_cat] > err_limits[err_cat];
+ return verdict;
}
/**
@@ -1257,31 +1272,80 @@ static int ata_eh_speed_down_needed(struct ata_device *dev)
* Kernel thread context (may sleep).
*
* RETURNS:
- * 0 on success, -errno otherwise
+ * Determined recovery action.
*/
-static int ata_eh_speed_down(struct ata_device *dev, int is_io,
- unsigned int err_mask)
+static unsigned int ata_eh_speed_down(struct ata_device *dev, int is_io,
+ unsigned int err_mask)
{
- if (!err_mask)
+ unsigned int verdict;
+ unsigned int action = 0;
+
+ /* don't bother if Cat-0 error */
+ if (ata_eh_categorize_error(is_io, err_mask) == 0)
return 0;
/* record error and determine whether speed down is necessary */
ata_ering_record(&dev->ering, is_io, err_mask);
+ verdict = ata_eh_speed_down_verdict(dev);
- if (!ata_eh_speed_down_needed(dev))
- return 0;
+ /* turn off NCQ? */
+ if ((verdict & ATA_EH_SPDN_NCQ_OFF) &&
+ (dev->flags & (ATA_DFLAG_PIO | ATA_DFLAG_NCQ |
+ ATA_DFLAG_NCQ_OFF)) == ATA_DFLAG_NCQ) {
+ dev->flags |= ATA_DFLAG_NCQ_OFF;
+ ata_dev_printk(dev, KERN_WARNING,
+ "NCQ disabled due to excessive errors\n");
+ goto done;
+ }
- /* speed down SATA link speed if possible */
- if (sata_down_spd_limit(dev->ap) == 0)
- return ATA_EH_HARDRESET;
+ /* speed down? */
+ if (verdict & ATA_EH_SPDN_SPEED_DOWN) {
+ /* speed down SATA link speed if possible */
+ if (sata_down_spd_limit(dev->ap) == 0) {
+ action |= ATA_EH_HARDRESET;
+ goto done;
+ }
- /* lower transfer mode */
- if (ata_down_xfermask_limit(dev, 0) == 0)
- return ATA_EH_SOFTRESET;
+ /* lower transfer mode */
+ if (dev->spdn_cnt < 2) {
+ static const int dma_dnxfer_sel[] =
+ { ATA_DNXFER_DMA, ATA_DNXFER_40C };
+ static const int pio_dnxfer_sel[] =
+ { ATA_DNXFER_PIO, ATA_DNXFER_FORCE_PIO0 };
+ int sel;
+
+ if (dev->xfer_shift != ATA_SHIFT_PIO)
+ sel = dma_dnxfer_sel[dev->spdn_cnt];
+ else
+ sel = pio_dnxfer_sel[dev->spdn_cnt];
+
+ dev->spdn_cnt++;
+
+ if (ata_down_xfermask_limit(dev, sel) == 0) {
+ action |= ATA_EH_SOFTRESET;
+ goto done;
+ }
+ }
+ }
+
+ /* Fall back to PIO? Slowing down to PIO is meaningless for
+ * SATA. Consider it only for PATA.
+ */
+ if ((verdict & ATA_EH_SPDN_FALLBACK_TO_PIO) && (dev->spdn_cnt >= 2) &&
+ (dev->ap->cbl != ATA_CBL_SATA) &&
+ (dev->xfer_shift != ATA_SHIFT_PIO)) {
+ if (ata_down_xfermask_limit(dev, ATA_DNXFER_FORCE_PIO) == 0) {
+ dev->spdn_cnt = 0;
+ action |= ATA_EH_SOFTRESET;
+ goto done;
+ }
+ }
- ata_dev_printk(dev, KERN_ERR,
- "speed down requested but no transfer mode left\n");
return 0;
+ done:
+ /* device has been slowed down, blow error history */
+ ata_ering_clear(&dev->ering);
+ return action;
}
/**
@@ -1964,7 +2028,7 @@ static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
{
struct ata_eh_context *ehc = &ap->eh_context;
struct ata_device *dev;
- int down_xfermask, i, rc;
+ int i, rc;
DPRINTK("ENTER\n");
@@ -1993,7 +2057,6 @@ static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
}
retry:
- down_xfermask = 0;
rc = 0;
/* if UNLOADING, finish immediately */
@@ -2038,10 +2101,8 @@ static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
/* configure transfer mode if necessary */
if (ehc->i.flags & ATA_EHI_SETMODE) {
rc = ata_set_mode(ap, &dev);
- if (rc) {
- down_xfermask = 1;
+ if (rc)
goto dev_fail;
- }
ehc->i.flags &= ~ATA_EHI_SETMODE;
}
@@ -2053,20 +2114,27 @@ static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
goto out;
dev_fail:
+ ehc->tries[dev->devno]--;
+
switch (rc) {
- case -ENODEV:
- /* device missing, schedule probing */
- ehc->i.probe_mask |= (1 << dev->devno);
case -EINVAL:
+ /* eeek, something went very wrong, give up */
ehc->tries[dev->devno] = 0;
break;
+
+ case -ENODEV:
+ /* device missing or wrong IDENTIFY data, schedule probing */
+ ehc->i.probe_mask |= (1 << dev->devno);
+ /* give it just one more chance */
+ ehc->tries[dev->devno] = min(ehc->tries[dev->devno], 1);
case -EIO:
- sata_down_spd_limit(ap);
- default:
- ehc->tries[dev->devno]--;
- if (down_xfermask &&
- ata_down_xfermask_limit(dev, ehc->tries[dev->devno] == 1))
- ehc->tries[dev->devno] = 0;
+ if (ehc->tries[dev->devno] == 1) {
+ /* This is the last chance, better to slow
+ * down than lose it.
+ */
+ sata_down_spd_limit(ap);
+ ata_down_xfermask_limit(dev, ATA_DNXFER_PIO);
+ }
}
if (ata_dev_enabled(dev) && !ehc->tries[dev->devno]) {
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 0009818..00a9a6c 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -333,6 +333,7 @@ int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg)
scsi_cmd[8] = args[3];
scsi_cmd[10] = args[4];
scsi_cmd[12] = args[5];
+ scsi_cmd[13] = args[6] & 0x0f;
scsi_cmd[14] = args[0];
/* Good values for timeout and retries? Values below
@@ -781,7 +782,7 @@ static void ata_gen_passthru_sense(struct ata_queued_cmd *qc)
*/
if (qc->err_mask ||
tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) {
- ata_to_sense_error(qc->ap->id, tf->command, tf->feature,
+ ata_to_sense_error(qc->ap->print_id, tf->command, tf->feature,
&sb[1], &sb[2], &sb[3], verbose);
sb[1] &= 0x0f;
}
@@ -854,7 +855,7 @@ static void ata_gen_ata_sense(struct ata_queued_cmd *qc)
*/
if (qc->err_mask ||
tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) {
- ata_to_sense_error(qc->ap->id, tf->command, tf->feature,
+ ata_to_sense_error(qc->ap->print_id, tf->command, tf->feature,
&sb[1], &sb[2], &sb[3], verbose);
sb[1] &= 0x0f;
}
@@ -986,29 +987,32 @@ int ata_scsi_change_queue_depth(struct scsi_device *sdev, int queue_depth)
struct ata_port *ap = ata_shost_to_port(sdev->host);
struct ata_device *dev;
unsigned long flags;
- int max_depth;
- if (queue_depth < 1)
+ if (queue_depth < 1 || queue_depth == sdev->queue_depth)
return sdev->queue_depth;
dev = ata_scsi_find_dev(ap, sdev);
if (!dev || !ata_dev_enabled(dev))
return sdev->queue_depth;
- max_depth = min(sdev->host->can_queue, ata_id_queue_depth(dev->id));
- max_depth = min(ATA_MAX_QUEUE - 1, max_depth);
- if (queue_depth > max_depth)
- queue_depth = max_depth;
-
- scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, queue_depth);
-
+ /* NCQ enabled? */
spin_lock_irqsave(ap->lock, flags);
- if (queue_depth > 1)
- dev->flags &= ~ATA_DFLAG_NCQ_OFF;
- else
+ dev->flags &= ~ATA_DFLAG_NCQ_OFF;
+ if (queue_depth == 1 || !ata_ncq_enabled(dev)) {
dev->flags |= ATA_DFLAG_NCQ_OFF;
+ queue_depth = 1;
+ }
spin_unlock_irqrestore(ap->lock, flags);
+ /* limit and apply queue depth */
+ queue_depth = min(queue_depth, sdev->host->can_queue);
+ queue_depth = min(queue_depth, ata_id_queue_depth(dev->id));
+ queue_depth = min(queue_depth, ATA_MAX_QUEUE - 1);
+
+ if (sdev->queue_depth == queue_depth)
+ return -EINVAL;
+
+ scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, queue_depth);
return queue_depth;
}
@@ -1469,7 +1473,7 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd *qc)
}
if (need_sense && !ap->ops->error_handler)
- ata_dump_status(ap->id, &qc->result_tf);
+ ata_dump_status(ap->print_id, &qc->result_tf);
qc->scsidone(cmd);
@@ -1495,11 +1499,9 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd *qc)
static int ata_scmd_need_defer(struct ata_device *dev, int is_io)
{
struct ata_port *ap = dev->ap;
+ int is_ncq = is_io && ata_ncq_enabled(dev);
- if (!(dev->flags & ATA_DFLAG_NCQ))
- return 0;
-
- if (is_io) {
+ if (is_ncq) {
if (!ata_tag_valid(ap->active_tag))
return 0;
} else {
@@ -2774,7 +2776,7 @@ static inline void ata_scsi_dump_cdb(struct ata_port *ap,
u8 *scsicmd = cmd->cmnd;
DPRINTK("CDB (%u:%d,%d,%d) %02x %02x %02x %02x %02x %02x %02x %02x %02x\n",
- ap->id,
+ ap->print_id,
scsidev->channel, scsidev->id, scsidev->lun,
scsicmd[0], scsicmd[1], scsicmd[2], scsicmd[3],
scsicmd[4], scsicmd[5], scsicmd[6], scsicmd[7],
@@ -3234,7 +3236,7 @@ struct ata_port *ata_sas_port_alloc(struct ata_host *host,
ata_port_init(ap, host, ent, 0);
ap->lock = shost->host_lock;
- kfree(ent);
+ devm_kfree(host->dev, ent);
return ap;
}
EXPORT_SYMBOL_GPL(ata_sas_port_alloc);
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 16bc3e3..7fea094 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -175,7 +175,7 @@ void ata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
*/
void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf)
{
- DPRINTK("ata%u: cmd 0x%X\n", ap->id, tf->command);
+ DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command);
iowrite8(tf->command, ap->ioaddr.command_addr);
ata_pause(ap);
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 0ad7781..c426714 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -41,6 +41,15 @@ struct ata_scsi_args {
enum {
/* flags for ata_dev_read_id() */
ATA_READID_POSTRESET = (1 << 0), /* reading ID after reset */
+
+ /* selector for ata_down_xfermask_limit() */
+ ATA_DNXFER_PIO = 0, /* speed down PIO */
+ ATA_DNXFER_DMA = 1, /* speed down DMA */
+ ATA_DNXFER_40C = 2, /* apply 40c cable limit */
+ ATA_DNXFER_FORCE_PIO = 3, /* force PIO */
+ ATA_DNXFER_FORCE_PIO0 = 4, /* force PIO0 */
+
+ ATA_DNXFER_QUIET = (1 << 31),
};
extern struct workqueue_struct *ata_aux_wq;
@@ -69,7 +78,7 @@ extern int ata_dev_revalidate(struct ata_device *dev, unsigned int flags);
extern int ata_dev_configure(struct ata_device *dev);
extern int sata_down_spd_limit(struct ata_port *ap);
extern int sata_set_spd_needed(struct ata_port *ap);
-extern int ata_down_xfermask_limit(struct ata_device *dev, int force_pio0);
+extern int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel);
extern int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev);
extern void ata_sg_clean(struct ata_queued_cmd *qc);
extern void ata_qc_free(struct ata_queued_cmd *qc);
@@ -150,7 +159,5 @@ extern void ata_qc_schedule_eh(struct ata_queued_cmd *qc);
/* libata-sff.c */
extern u8 ata_irq_on(struct ata_port *ap);
-/* pata_sis.c */
-extern struct ata_port_info sis_info133;
#endif /* __LIBATA_H__ */
diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c
index 1ce8fcf..b49d8b7 100644
--- a/drivers/ata/pata_cs5520.c
+++ b/drivers/ata/pata_cs5520.c
@@ -325,6 +325,30 @@ static int cs5520_reinit_one(struct pci_dev *pdev)
pci_write_config_byte(pdev, 0x60, pcicfg | 0x40);
return ata_pci_device_resume(pdev);
}
+
+/**
+ * cs5520_pci_device_suspend - device suspend
+ * @pdev: PCI device
+ *
+ * We have to cut and waste bits from the standard method because
+ * the 5520 is a bit odd and not just a pure ATA device. As a result
+ * we must not disable it. The needed code is short and this avoids
+ * chip specific mess in the core code.
+ */
+
+static int cs5520_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
+{
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ int rc = 0;
+
+ rc = ata_host_suspend(host, mesg);
+ if (rc)
+ return rc;
+
+ pci_save_state(pdev);
+ return 0;
+}
+
/* For now keep DMA off. We can set it for all but A rev CS5510 once the
core ATA code can handle it */
@@ -340,7 +364,7 @@ static struct pci_driver cs5520_pci_driver = {
.id_table = pata_cs5520,
.probe = cs5520_init_one,
.remove = cs5520_remove_one,
- .suspend = ata_pci_device_suspend,
+ .suspend = cs5520_pci_device_suspend,
.resume = cs5520_reinit_one,
};
diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c
index 3222ac7..bd8aaaf 100644
--- a/drivers/ata/pata_ixp4xx_cf.c
+++ b/drivers/ata/pata_ixp4xx_cf.c
@@ -23,15 +23,16 @@
#include <scsi/scsi_host.h>
#define DRV_NAME "pata_ixp4xx_cf"
-#define DRV_VERSION "0.1.1ac1"
+#define DRV_VERSION "0.1.1ac3"
-static int ixp4xx_set_mode(struct ata_port *ap, struct ata_device *adev)
+static int ixp4xx_set_mode(struct ata_port *ap, struct ata_device **error)
{
int i;
for (i = 0; i < ATA_MAX_DEVICES; i++) {
struct ata_device *dev = &ap->device[i];
- if (ata_dev_enabled(dev)) {
+ if (ata_dev_ready(dev)) {
+ ata_dev_printk(dev, KERN_INFO, "configured for PIO0\n");
dev->pio_mode = XFER_PIO_0;
dev->xfer_mode = XFER_PIO_0;
dev->xfer_shift = ATA_SHIFT_PIO;
diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c
index 45215aa..2389107 100644
--- a/drivers/ata/pata_oldpiix.c
+++ b/drivers/ata/pata_oldpiix.c
@@ -25,7 +25,7 @@
#include <linux/ata.h>
#define DRV_NAME "pata_oldpiix"
-#define DRV_VERSION "0.5.3"
+#define DRV_VERSION "0.5.4"
/**
* oldpiix_pre_reset - probe begin
@@ -209,10 +209,9 @@ static unsigned int oldpiix_qc_issue_prot(struct ata_queued_cmd *qc)
struct ata_device *adev = qc->dev;
if (adev != ap->private_data) {
+ oldpiix_set_piomode(ap, adev);
if (adev->dma_mode)
oldpiix_set_dmamode(ap, adev);
- else if (adev->pio_mode)
- oldpiix_set_piomode(ap, adev);
}
return ata_qc_issue_prot(qc);
}
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index 36468ec..d10ae3e 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -320,14 +320,17 @@ static void pcmcia_remove_one(struct pcmcia_device *pdev)
static struct pcmcia_device_id pcmcia_devices[] = {
PCMCIA_DEVICE_FUNC_ID(4),
PCMCIA_DEVICE_MANF_CARD(0x0007, 0x0000), /* Hitachi */
+ PCMCIA_DEVICE_MANF_CARD(0x000a, 0x0000), /* I-O Data CFA */
+ PCMCIA_DEVICE_MANF_CARD(0x001c, 0x0001), /* Mitsubishi CFA */
PCMCIA_DEVICE_MANF_CARD(0x0032, 0x0704),
- PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401),
+ PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401), /* SanDisk CFA */
PCMCIA_DEVICE_MANF_CARD(0x0098, 0x0000), /* Toshiba */
PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d),
PCMCIA_DEVICE_MANF_CARD(0x00ce, 0x0000), /* Samsung */
PCMCIA_DEVICE_MANF_CARD(0x0319, 0x0000), /* Hitachi */
PCMCIA_DEVICE_MANF_CARD(0x2080, 0x0001),
- PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0200), /* Lexar */
+ PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0100), /* Viking CFA */
+ PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0200), /* Lexar, Viking CFA */
PCMCIA_DEVICE_PROD_ID123("Caravelle", "PSC-IDE ", "PSC000", 0x8c36137c, 0xd0693ab8, 0x2768a9f0),
PCMCIA_DEVICE_PROD_ID123("CDROM", "IDE", "MCD-601p", 0x1b9179ca, 0xede88951, 0x0d902f74),
PCMCIA_DEVICE_PROD_ID123("PCMCIA", "IDE CARD", "F1", 0x281f1c5d, 0x1907960c, 0xf7fde8b9),
diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c
index 479a326..02ea95f 100644
--- a/drivers/ata/pata_platform.c
+++ b/drivers/ata/pata_platform.c
@@ -42,6 +42,7 @@ static int pata_platform_set_mode(struct ata_port *ap, struct ata_device **unuse
dev->pio_mode = dev->xfer_mode = XFER_PIO_0;
dev->xfer_shift = ATA_SHIFT_PIO;
dev->flags |= ATA_DFLAG_PIO;
+ ata_dev_printk(dev, KERN_INFO, "configured for PIO\n");
}
}
return 0;
diff --git a/drivers/ata/pata_rz1000.c b/drivers/ata/pata_rz1000.c
index 71a2bac..60fc598 100644
--- a/drivers/ata/pata_rz1000.c
+++ b/drivers/ata/pata_rz1000.c
@@ -71,6 +71,7 @@ static int rz1000_set_mode(struct ata_port *ap, struct ata_device **unused)
dev->xfer_mode = XFER_PIO_0;
dev->xfer_shift = ATA_SHIFT_PIO;
dev->flags |= ATA_DFLAG_PIO;
+ ata_dev_printk(dev, KERN_INFO, "configured for PIO\n");
}
}
return 0;
diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
new file mode 100644
index 0000000..de04042
--- /dev/null
+++ b/drivers/ata/pata_scc.c
[---snip due to size; get from git repository---]
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index ed79fab..5f10a33 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -33,7 +33,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_sil680"
-#define DRV_VERSION "0.4.1"
+#define DRV_VERSION "0.4.5"
/**
* sil680_selreg - return register base
@@ -139,10 +139,13 @@ static void sil680_set_piomode(struct ata_port *ap, struct ata_device *adev)
unsigned long tfaddr = sil680_selreg(ap, 0x02);
unsigned long addr = sil680_seldev(ap, adev, 0x04);
+ unsigned long addr_mask = 0x80 + 4 * ap->port_no;
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
int pio = adev->pio_mode - XFER_PIO_0;
int lowest_pio = pio;
+ int port_shift = 4 * adev->devno;
u16 reg;
+ u8 mode;
struct ata_device *pair = ata_dev_pair(adev);
@@ -153,10 +156,17 @@ static void sil680_set_piomode(struct ata_port *ap, struct ata_device *adev)
pci_write_config_word(pdev, tfaddr, speed_t[lowest_pio]);
pci_read_config_word(pdev, tfaddr-2, ®);
+ pci_read_config_byte(pdev, addr_mask, &mode);
+
reg &= ~0x0200; /* Clear IORDY */
- if (ata_pio_need_iordy(adev))
+ mode &= ~(3 << port_shift); /* Clear IORDY and DMA bits */
+
+ if (ata_pio_need_iordy(adev)) {
reg |= 0x0200; /* Enable IORDY */
+ mode |= 1 << port_shift;
+ }
pci_write_config_word(pdev, tfaddr-2, reg);
+ pci_write_config_byte(pdev, addr_mask, mode);
}
/**
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index 560103d..efa530b 100644
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c
@@ -32,9 +32,8 @@
#include <scsi/scsi_host.h>
#include <linux/libata.h>
#include <linux/ata.h>
-#include "libata.h"
+#include "sis.h"
-#undef DRV_NAME /* already defined in libata.h, for libata-core */
#define DRV_NAME "pata_sis"
#define DRV_VERSION "0.4.5"
@@ -151,7 +150,7 @@ static int sis_66_pre_reset(struct ata_port *ap)
if (!pci_test_config_bits(pdev, &sis_enable_bits[ap->port_no])) {
ata_port_disable(ap);
- printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
+ ata_port_printk(ap, KERN_INFO, "port disabled. ignoring.\n");
return 0;
}
/* Older chips keep cable detect in bits 4/5 of reg 0x48 */
@@ -197,7 +196,7 @@ static int sis_old_pre_reset(struct ata_port *ap)
if (!pci_test_config_bits(pdev, &sis_enable_bits[ap->port_no])) {
ata_port_disable(ap);
- printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
+ ata_port_printk(ap, KERN_INFO, "port disabled. ignoring.\n");
return 0;
}
ap->cbl = ATA_CBL_PATA40;
diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c
index 96e890f..0720461 100644
--- a/drivers/ata/pata_sl82c105.c
+++ b/drivers/ata/pata_sl82c105.c
@@ -7,6 +7,13 @@
* SL82C105/Winbond 553 IDE driver
*
* and in part on the documentation and errata sheet
+ *
+ *
+ * Note: The controller like many controllers has shared timings for
+ * PIO and DMA. We thus flip to the DMA timings in dma_start and flip back
+ * in the dma_stop function. Thus we actually don't need a set_dmamode
+ * method as the PIO method is always called and will set the right PIO
+ * timing parameters.
*/
#include <linux/kernel.h>
@@ -19,7 +26,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_sl82c105"
-#define DRV_VERSION "0.2.3"
+#define DRV_VERSION "0.2.5"
enum {
/*
@@ -126,33 +133,6 @@ static void sl82c105_configure_dmamode(struct ata_port *ap, struct ata_device *a
}
/**
- * sl82c105_set_dmamode - set initial DMA mode data
- * @ap: ATA interface
- * @adev: ATA device
- *
- * Called to do the DMA mode setup. This replaces the PIO timings
- * for the device in question. Set appropriate PIO timings not DMA
- * timings at this point.
- */
-
-static void sl82c105_set_dmamode(struct ata_port *ap, struct ata_device *adev)
-{
- switch(adev->dma_mode) {
- case XFER_MW_DMA_0:
- sl82c105_configure_piomode(ap, adev, 0);
- break;
- case XFER_MW_DMA_1:
- sl82c105_configure_piomode(ap, adev, 3);
- break;
- case XFER_MW_DMA_2:
- sl82c105_configure_piomode(ap, adev, 4);
- break;
- default:
- BUG();
- }
-}
-
-/**
* sl82c105_reset_engine - Reset the DMA engine
* @ap: ATA interface
*
@@ -222,7 +202,7 @@ static void sl82c105_bmdma_stop(struct ata_queued_cmd *qc)
/* This will redo the initial setup of the DMA device to matching
PIO timings */
- sl82c105_set_dmamode(ap, qc->dev);
+ sl82c105_set_piomode(ap, qc->dev);
}
static struct scsi_host_template sl82c105_sht = {
@@ -246,7 +226,6 @@ static struct scsi_host_template sl82c105_sht = {
static struct ata_port_operations sl82c105_port_ops = {
.port_disable = ata_port_disable,
.set_piomode = sl82c105_set_piomode,
- .set_dmamode = sl82c105_set_dmamode,
.mode_filter = ata_pci_default_filter,
.tf_load = ata_tf_load,
diff --git a/drivers/ata/pdc_adma.c b/drivers/ata/pdc_adma.c
index 857ac23..37bab32 100644
--- a/drivers/ata/pdc_adma.c
+++ b/drivers/ata/pdc_adma.c
@@ -498,7 +498,7 @@ static inline unsigned int adma_intr_mmio(struct ata_host *host)
if ((status & ATA_BUSY))
continue;
DPRINTK("ata%u: protocol %d (dev_stat 0x%X)\n",
- ap->id, qc->tf.protocol, status);
+ ap->print_id, qc->tf.protocol, status);
/* complete taskfile transaction */
pp->state = adma_state_idle;
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index d689df5..06867b9 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -1276,7 +1276,7 @@ static void mv_err_intr(struct ata_port *ap, int reset_allowed)
pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN;
}
DPRINTK(KERN_ERR "ata%u: port error; EDMA err cause: 0x%08x "
- "SERR: 0x%08x\n", ap->id, edma_err_cause, serr);
+ "SERR: 0x%08x\n", ap->print_id, edma_err_cause, serr);
/* Clear EDMA now that SERR cleanup done */
writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
@@ -2052,7 +2052,7 @@ static void mv_port_init(struct ata_ioports *port, void __iomem *port_mmio)
port->altstatus_addr = port->ctl_addr = shd_base + SHD_CTL_AST_OFS;
/* unused: */
- port->cmd_addr = port->bmdma_addr = port->scr_addr = 0;
+ port->cmd_addr = port->bmdma_addr = port->scr_addr = NULL;
/* Clear any currently outstanding port interrupt conditions */
serr_ofs = mv_scr_offset(SCR_ERROR);
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index ab92f20..783281e 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -219,6 +219,7 @@ struct nv_adma_port_priv {
void __iomem * gen_block;
void __iomem * notifier_clear_block;
u8 flags;
+ int last_issue_ncq;
};
struct nv_host_priv {
@@ -254,10 +255,7 @@ static int nv_adma_port_suspend(struct ata_port *ap, pm_message_t mesg);
static int nv_adma_port_resume(struct ata_port *ap);
static void nv_adma_error_handler(struct ata_port *ap);
static void nv_adma_host_stop(struct ata_host *host);
-static void nv_adma_bmdma_setup(struct ata_queued_cmd *qc);
-static void nv_adma_bmdma_start(struct ata_queued_cmd *qc);
-static void nv_adma_bmdma_stop(struct ata_queued_cmd *qc);
-static u8 nv_adma_bmdma_status(struct ata_port *ap);
+static void nv_adma_post_internal_cmd(struct ata_queued_cmd *qc);
enum nv_host_type
{
@@ -432,16 +430,16 @@ static const struct ata_port_operations nv_adma_ops = {
.exec_command = ata_exec_command,
.check_status = ata_check_status,
.dev_select = ata_std_dev_select,
- .bmdma_setup = nv_adma_bmdma_setup,
- .bmdma_start = nv_adma_bmdma_start,
- .bmdma_stop = nv_adma_bmdma_stop,
- .bmdma_status = nv_adma_bmdma_status,
+ .bmdma_setup = ata_bmdma_setup,
+ .bmdma_start = ata_bmdma_start,
+ .bmdma_stop = ata_bmdma_stop,
+ .bmdma_status = ata_bmdma_status,
.qc_prep = nv_adma_qc_prep,
.qc_issue = nv_adma_qc_issue,
.freeze = nv_ck804_freeze,
.thaw = nv_ck804_thaw,
.error_handler = nv_adma_error_handler,
- .post_internal_cmd = nv_adma_bmdma_stop,
+ .post_internal_cmd = nv_adma_post_internal_cmd,
.data_xfer = ata_data_xfer,
.irq_handler = nv_adma_interrupt,
.irq_clear = nv_adma_irq_clear,
@@ -661,29 +659,30 @@ static unsigned int nv_adma_tf_to_cpb(struct ata_taskfile *tf, __le16 *cpb)
{
unsigned int idx = 0;
- cpb[idx++] = cpu_to_le16((ATA_REG_DEVICE << 8) | tf->device | WNB);
-
- if ((tf->flags & ATA_TFLAG_LBA48) == 0) {
- cpb[idx++] = cpu_to_le16(IGN);
- cpb[idx++] = cpu_to_le16(IGN);
- cpb[idx++] = cpu_to_le16(IGN);
- cpb[idx++] = cpu_to_le16(IGN);
- cpb[idx++] = cpu_to_le16(IGN);
- }
- else {
- cpb[idx++] = cpu_to_le16((ATA_REG_ERR << 8) | tf->hob_feature);
- cpb[idx++] = cpu_to_le16((ATA_REG_NSECT << 8) | tf->hob_nsect);
- cpb[idx++] = cpu_to_le16((ATA_REG_LBAL << 8) | tf->hob_lbal);
- cpb[idx++] = cpu_to_le16((ATA_REG_LBAM << 8) | tf->hob_lbam);
- cpb[idx++] = cpu_to_le16((ATA_REG_LBAH << 8) | tf->hob_lbah);
+ if(tf->flags & ATA_TFLAG_ISADDR) {
+ if (tf->flags & ATA_TFLAG_LBA48) {
+ cpb[idx++] = cpu_to_le16((ATA_REG_ERR << 8) | tf->hob_feature | WNB);
+ cpb[idx++] = cpu_to_le16((ATA_REG_NSECT << 8) | tf->hob_nsect);
+ cpb[idx++] = cpu_to_le16((ATA_REG_LBAL << 8) | tf->hob_lbal);
+ cpb[idx++] = cpu_to_le16((ATA_REG_LBAM << 8) | tf->hob_lbam);
+ cpb[idx++] = cpu_to_le16((ATA_REG_LBAH << 8) | tf->hob_lbah);
+ cpb[idx++] = cpu_to_le16((ATA_REG_ERR << 8) | tf->feature);
+ } else
+ cpb[idx++] = cpu_to_le16((ATA_REG_ERR << 8) | tf->feature | WNB);
+
+ cpb[idx++] = cpu_to_le16((ATA_REG_NSECT << 8) | tf->nsect);
+ cpb[idx++] = cpu_to_le16((ATA_REG_LBAL << 8) | tf->lbal);
+ cpb[idx++] = cpu_to_le16((ATA_REG_LBAM << 8) | tf->lbam);
+ cpb[idx++] = cpu_to_le16((ATA_REG_LBAH << 8) | tf->lbah);
}
- cpb[idx++] = cpu_to_le16((ATA_REG_ERR << 8) | tf->feature);
- cpb[idx++] = cpu_to_le16((ATA_REG_NSECT << 8) | tf->nsect);
- cpb[idx++] = cpu_to_le16((ATA_REG_LBAL << 8) | tf->lbal);
- cpb[idx++] = cpu_to_le16((ATA_REG_LBAM << 8) | tf->lbam);
- cpb[idx++] = cpu_to_le16((ATA_REG_LBAH << 8) | tf->lbah);
+
+ if(tf->flags & ATA_TFLAG_DEVICE)
+ cpb[idx++] = cpu_to_le16((ATA_REG_DEVICE << 8) | tf->device);
cpb[idx++] = cpu_to_le16((ATA_REG_CMD << 8) | tf->command | CMDEND);
+
+ while(idx < 12)
+ cpb[idx++] = cpu_to_le16(IGN);
return idx;
}
@@ -741,6 +740,17 @@ static int nv_adma_check_cpb(struct ata_port *ap, int cpb_num, int force_err)
DPRINTK("Completing qc from tag %d with err_mask %u\n",cpb_num,
qc->err_mask);
ata_qc_complete(qc);
+ } else {
+ struct ata_eh_info *ehi = &ap->eh_info;
+ /* Notifier bits set without a command may indicate the drive
+ is misbehaving. Raise host state machine violation on this
+ condition. */
+ ata_port_printk(ap, KERN_ERR, "notifier for tag %d with no command?\n",
+ cpb_num);
+ ehi->err_mask |= AC_ERR_HSM;
+ ehi->action |= ATA_EH_SOFTRESET;
+ ata_port_freeze(ap);
+ return 1;
}
}
return 0;
@@ -852,22 +862,14 @@ static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance)
if (status & (NV_ADMA_STAT_DONE |
NV_ADMA_STAT_CPBERR)) {
+ u32 check_commands = notifier | notifier_error;
+ int pos, error = 0;
/** Check CPBs for completed commands */
-
- if (ata_tag_valid(ap->active_tag)) {
- /* Non-NCQ command */
- nv_adma_check_cpb(ap, ap->active_tag,
- notifier_error & (1 << ap->active_tag));
- } else {
- int pos, error = 0;
- u32 active = ap->sactive;
-
- while ((pos = ffs(active)) && !error) {
- pos--;
- error = nv_adma_check_cpb(ap, pos,
- notifier_error & (1 << pos) );
- active &= ~(1 << pos );
- }
+ while ((pos = ffs(check_commands)) && !error) {
+ pos--;
+ error = nv_adma_check_cpb(ap, pos,
+ notifier_error & (1 << pos) );
+ check_commands &= ~(1 << pos );
}
}
}
@@ -905,73 +907,12 @@ static void nv_adma_irq_clear(struct ata_port *ap)
iowrite8(ioread8(dma_stat_addr), dma_stat_addr);
}
-static void nv_adma_bmdma_setup(struct ata_queued_cmd *qc)
+static void nv_adma_post_internal_cmd(struct ata_queued_cmd *qc)
{
- struct ata_port *ap = qc->ap;
- unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE);
- struct nv_adma_port_priv *pp = ap->private_data;
- u8 dmactl;
-
- if(!(pp->flags & NV_ADMA_PORT_REGISTER_MODE)) {
- WARN_ON(1);
- return;
- }
-
- /* load PRD table addr. */
- iowrite32(ap->prd_dma, ap->ioaddr.bmdma_addr + ATA_DMA_TABLE_OFS);
-
- /* specify data direction, triple-check start bit is clear */
- dmactl = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
- dmactl &= ~(ATA_DMA_WR | ATA_DMA_START);
- if (!rw)
- dmactl |= ATA_DMA_WR;
-
- iowrite8(dmactl, ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
-
- /* issue r/w command */
- ata_exec_command(ap, &qc->tf);
-}
-
-static void nv_adma_bmdma_start(struct ata_queued_cmd *qc)
-{
- struct ata_port *ap = qc->ap;
- struct nv_adma_port_priv *pp = ap->private_data;
- u8 dmactl;
-
- if(!(pp->flags & NV_ADMA_PORT_REGISTER_MODE)) {
- WARN_ON(1);
- return;
- }
-
- /* start host DMA transaction */
- dmactl = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
- iowrite8(dmactl | ATA_DMA_START,
- ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
-}
-
-static void nv_adma_bmdma_stop(struct ata_queued_cmd *qc)
-{
- struct ata_port *ap = qc->ap;
- struct nv_adma_port_priv *pp = ap->private_data;
-
- if(!(pp->flags & NV_ADMA_PORT_REGISTER_MODE))
- return;
-
- /* clear start/stop bit */
- iowrite8(ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD) & ~ATA_DMA_START,
- ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
-
- /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
- ata_altstatus(ap); /* dummy read */
-}
-
-static u8 nv_adma_bmdma_status(struct ata_port *ap)
-{
- struct nv_adma_port_priv *pp = ap->private_data;
-
- WARN_ON(!(pp->flags & NV_ADMA_PORT_REGISTER_MODE));
+ struct nv_adma_port_priv *pp = qc->ap->private_data;
- return ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
+ if(pp->flags & NV_ADMA_PORT_REGISTER_MODE)
+ ata_bmdma_post_internal_cmd(qc);
}
static int nv_adma_port_start(struct ata_port *ap)
@@ -1040,14 +981,15 @@ static int nv_adma_port_start(struct ata_port *ap)
/* clear GO for register mode, enable interrupt */
tmp = readw(mmio + NV_ADMA_CTL);
- writew( (tmp & ~NV_ADMA_CTL_GO) | NV_ADMA_CTL_AIEN, mmio + NV_ADMA_CTL);
+ writew( (tmp & ~NV_ADMA_CTL_GO) | NV_ADMA_CTL_AIEN |
+ NV_ADMA_CTL_HOTPLUG_IEN, mmio + NV_ADMA_CTL);
tmp = readw(mmio + NV_ADMA_CTL);
writew(tmp | NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
- readl( mmio + NV_ADMA_CTL ); /* flush posted write */
+ readw( mmio + NV_ADMA_CTL ); /* flush posted write */
udelay(1);
writew(tmp & ~NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
- readl( mmio + NV_ADMA_CTL ); /* flush posted write */
+ readw( mmio + NV_ADMA_CTL ); /* flush posted write */
return 0;
}
@@ -1099,14 +1041,15 @@ static int nv_adma_port_resume(struct ata_port *ap)
/* clear GO for register mode, enable interrupt */
tmp = readw(mmio + NV_ADMA_CTL);
- writew((tmp & ~NV_ADMA_CTL_GO) | NV_ADMA_CTL_AIEN, mmio + NV_ADMA_CTL);
+ writew( (tmp & ~NV_ADMA_CTL_GO) | NV_ADMA_CTL_AIEN |
+ NV_ADMA_CTL_HOTPLUG_IEN, mmio + NV_ADMA_CTL);
tmp = readw(mmio + NV_ADMA_CTL);
writew(tmp | NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
- readl( mmio + NV_ADMA_CTL ); /* flush posted write */
+ readw( mmio + NV_ADMA_CTL ); /* flush posted write */
udelay(1);
writew(tmp & ~NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
- readl( mmio + NV_ADMA_CTL ); /* flush posted write */
+ readw( mmio + NV_ADMA_CTL ); /* flush posted write */
return 0;
}
@@ -1163,11 +1106,7 @@ static void nv_adma_fill_aprd(struct ata_queued_cmd *qc,
int idx,
struct nv_adma_prd *aprd)
{
- u8 flags;
-
- memset(aprd, 0, sizeof(struct nv_adma_prd));
-
- flags = 0;
+ u8 flags = 0;
if (qc->tf.flags & ATA_TFLAG_WRITE)
flags |= NV_APRD_WRITE;
if (idx == qc->n_elem - 1)
@@ -1178,6 +1117,7 @@ static void nv_adma_fill_aprd(struct ata_queued_cmd *qc,
aprd->addr = cpu_to_le64(((u64)sg_dma_address(sg)));
aprd->len = cpu_to_le32(((u32)sg_dma_len(sg))); /* len in bytes */
aprd->flags = flags;
+ aprd->packet_len = 0;
}
static void nv_adma_fill_sg(struct ata_queued_cmd *qc, struct nv_adma_cpb *cpb)
@@ -1198,6 +1138,8 @@ static void nv_adma_fill_sg(struct ata_queued_cmd *qc, struct nv_adma_cpb *cpb)
}
if (idx > 5)
cpb->next_aprd = cpu_to_le64(((u64)(pp->aprd_dma + NV_ADMA_SGTBL_SZ * qc->tag)));
+ else
+ cpb->next_aprd = cpu_to_le64(0);
}
static int nv_adma_use_reg_mode(struct ata_queued_cmd *qc)
@@ -1230,7 +1172,10 @@ static void nv_adma_qc_prep(struct ata_queued_cmd *qc)
return;
}
- memset(cpb, 0, sizeof(struct nv_adma_cpb));
+ cpb->resp_flags = NV_CPB_RESP_DONE;
+ wmb();
+ cpb->ctl_flags = 0;
+ wmb();
cpb->len = 3;
cpb->tag = qc->tag;
@@ -1254,12 +1199,15 @@ static void nv_adma_qc_prep(struct ata_queued_cmd *qc)
finished filling in all of the contents */
wmb();
cpb->ctl_flags = ctl_flags;
+ wmb();
+ cpb->resp_flags = 0;
}
static unsigned int nv_adma_qc_issue(struct ata_queued_cmd *qc)
{
struct nv_adma_port_priv *pp = qc->ap->private_data;
void __iomem *mmio = pp->ctl_block;
+ int curr_ncq = (qc->tf.protocol == ATA_PROT_NCQ);
VPRINTK("ENTER\n");
@@ -1274,6 +1222,14 @@ static unsigned int nv_adma_qc_issue(struct ata_queued_cmd *qc)
/* write append register, command tag in lower 8 bits
and (number of cpbs to append -1) in top 8 bits */
wmb();
+
+ if(curr_ncq != pp->last_issue_ncq) {
+ /* Seems to need some delay before switching between NCQ and non-NCQ
+ commands, else we get command timeouts and such. */
+ udelay(20);
+ pp->last_issue_ncq = curr_ncq;
+ }
+
writew(qc->tag, mmio + NV_ADMA_APPEND);
DPRINTK("Issued tag %u\n",qc->tag);
@@ -1446,6 +1402,30 @@ static void nv_adma_error_handler(struct ata_port *ap)
void __iomem *mmio = pp->ctl_block;
int i;
u16 tmp;
+
+ if(ata_tag_valid(ap->active_tag) || ap->sactive) {
+ u32 notifier = readl(mmio + NV_ADMA_NOTIFIER);
+ u32 notifier_error = readl(mmio + NV_ADMA_NOTIFIER_ERROR);
+ u32 gen_ctl = readl(pp->gen_block + NV_ADMA_GEN_CTL);
+ u32 status = readw(mmio + NV_ADMA_STAT);
+ u8 cpb_count = readb(mmio + NV_ADMA_CPB_COUNT);
+ u8 next_cpb_idx = readb(mmio + NV_ADMA_NEXT_CPB_IDX);
+
+ ata_port_printk(ap, KERN_ERR, "EH in ADMA mode, notifier 0x%X "
+ "notifier_error 0x%X gen_ctl 0x%X status 0x%X "
+ "next cpb count 0x%X next cpb idx 0x%x\n",
+ notifier, notifier_error, gen_ctl, status,
+ cpb_count, next_cpb_idx);
+
+ for( i=0;i<NV_ADMA_MAX_CPBS;i++) {
+ struct nv_adma_cpb *cpb = &pp->cpb[i];
+ if( (ata_tag_valid(ap->active_tag) && i == ap->active_tag) ||
+ ap->sactive & (1 << i) )
+ ata_port_printk(ap, KERN_ERR,
+ "CPB %d: ctl_flags 0x%x, resp_flags 0x%x\n",
+ i, cpb->ctl_flags, cpb->resp_flags);
+ }
+ }
/* Push us back into port register mode for error handling. */
nv_adma_register_mode(ap);
@@ -1460,10 +1440,10 @@ static void nv_adma_error_handler(struct ata_port *ap)
/* Reset channel */
tmp = readw(mmio + NV_ADMA_CTL);
writew(tmp | NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
- readl( mmio + NV_ADMA_CTL ); /* flush posted write */
+ readw( mmio + NV_ADMA_CTL ); /* flush posted write */
udelay(1);
writew(tmp & ~NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
- readl( mmio + NV_ADMA_CTL ); /* flush posted write */
+ readw( mmio + NV_ADMA_CTL ); /* flush posted write */
}
ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset,
diff --git a/drivers/ata/sata_qstor.c b/drivers/ata/sata_qstor.c
index 6097d8f..1558571 100644
--- a/drivers/ata/sata_qstor.c
+++ b/drivers/ata/sata_qstor.c
@@ -446,7 +446,7 @@ static inline unsigned int qs_intr_mmio(struct ata_host *host)
if ((status & ATA_BUSY))
continue;
DPRINTK("ata%u: protocol %d (dev_stat 0x%X)\n",
- ap->id, qc->tf.protocol, status);
+ ap->print_id, qc->tf.protocol, status);
/* complete taskfile transaction */
pp->state = qs_state_idle;
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index dca3d37..1487255 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -339,7 +339,7 @@ static inline void __iomem *sil_scr_addr(struct ata_port *ap, unsigned int sc_re
break;
}
- return 0;
+ return NULL;
}
static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg)
diff --git a/drivers/ata/sata_sis.c b/drivers/ata/sata_sis.c
index 49c9e2b..fd694b6 100644
--- a/drivers/ata/sata_sis.c
+++ b/drivers/ata/sata_sis.c
@@ -40,9 +40,8 @@
#include <linux/device.h>
#include <scsi/scsi_host.h>
#include <linux/libata.h>
-#include "libata.h"
+#include "sis.h"
-#undef DRV_NAME /* already defined in libata.h, for libata-core */
#define DRV_NAME "sata_sis"
#define DRV_VERSION "0.7"
diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c
index 0ebd77b..4fb8bfc 100644
--- a/drivers/ata/sata_sx4.c
+++ b/drivers/ata/sata_sx4.c
@@ -421,7 +421,7 @@ static void pdc20621_dma_prep(struct ata_queued_cmd *qc)
WARN_ON(!(qc->flags & ATA_QCFLAG_DMAMAP));
- VPRINTK("ata%u: ENTER\n", ap->id);
+ VPRINTK("ata%u: ENTER\n", ap->print_id);
/* hard-code chip #0 */
mmio += PDC_CHIP0_OFS;
@@ -478,7 +478,7 @@ static void pdc20621_nodata_prep(struct ata_queued_cmd *qc)
unsigned int portno = ap->port_no;
unsigned int i;
- VPRINTK("ata%u: ENTER\n", ap->id);
+ VPRINTK("ata%u: ENTER\n", ap->print_id);
/* hard-code chip #0 */
mmio += PDC_CHIP0_OFS;
@@ -605,7 +605,7 @@ static void pdc20621_packet_start(struct ata_queued_cmd *qc)
/* hard-code chip #0 */
mmio += PDC_CHIP0_OFS;
- VPRINTK("ata%u: ENTER\n", ap->id);
+ VPRINTK("ata%u: ENTER\n", ap->print_id);
wmb(); /* flush PRD, pkt writes */
@@ -672,7 +672,7 @@ static inline unsigned int pdc20621_host_intr( struct ata_port *ap,
/* step two - DMA from DIMM to host */
if (doing_hdma) {
- VPRINTK("ata%u: read hdma, 0x%x 0x%x\n", ap->id,
+ VPRINTK("ata%u: read hdma, 0x%x 0x%x\n", ap->print_id,
readl(mmio + 0x104), readl(mmio + PDC_HDMA_CTLSTAT));
/* get drive status; clear intr; complete txn */
qc->err_mask |= ac_err_mask(ata_wait_idle(ap));
@@ -683,7 +683,7 @@ static inline unsigned int pdc20621_host_intr( struct ata_port *ap,
/* step one - exec ATA command */
else {
u8 seq = (u8) (port_no + 1 + 4);
- VPRINTK("ata%u: read ata, 0x%x 0x%x\n", ap->id,
+ VPRINTK("ata%u: read ata, 0x%x 0x%x\n", ap->print_id,
readl(mmio + 0x104), readl(mmio + PDC_HDMA_CTLSTAT));
/* submit hdma pkt */
@@ -698,7 +698,7 @@ static inline unsigned int pdc20621_host_intr( struct ata_port *ap,
/* step one - DMA from host to DIMM */
if (doing_hdma) {
u8 seq = (u8) (port_no + 1);
- VPRINTK("ata%u: write hdma, 0x%x 0x%x\n", ap->id,
+ VPRINTK("ata%u: write hdma, 0x%x 0x%x\n", ap->print_id,
readl(mmio + 0x104), readl(mmio + PDC_HDMA_CTLSTAT));
/* submit ata pkt */
@@ -711,7 +711,7 @@ static inline unsigned int pdc20621_host_intr( struct ata_port *ap,
/* step two - execute ATA command */
else {
- VPRINTK("ata%u: write ata, 0x%x 0x%x\n", ap->id,
+ VPRINTK("ata%u: write ata, 0x%x 0x%x\n", ap->print_id,
readl(mmio + 0x104), readl(mmio + PDC_HDMA_CTLSTAT));
/* get drive status; clear intr; complete txn */
qc->err_mask |= ac_err_mask(ata_wait_idle(ap));
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index baca6d7..fe9101a 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -423,16 +423,21 @@ static struct ata_probe_ent *vt6420_init_probe_ent(struct pci_dev *pdev)
{
struct ata_probe_ent *probe_ent;
struct ata_port_info *ppi[2];
- void __iomem * const *iomap;
+ void __iomem *bar5;
ppi[0] = ppi[1] = &vt6420_port_info;
probe_ent = ata_pci_init_native_mode(pdev, ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
if (!probe_ent)
return NULL;
- iomap = pcim_iomap_table(pdev);
- probe_ent->port[0].scr_addr = svia_scr_addr(iomap[5], 0);
- probe_ent->port[1].scr_addr = svia_scr_addr(iomap[5], 1);
+ bar5 = pcim_iomap(pdev, 5, 0);
+ if (!bar5) {
+ dev_printk(KERN_ERR, &pdev->dev, "failed to iomap PCI BAR 5\n");
+ return NULL;
+ }
+
+ probe_ent->port[0].scr_addr = svia_scr_addr(bar5, 0);
+ probe_ent->port[1].scr_addr = svia_scr_addr(bar5, 1);
return probe_ent;
}
@@ -460,6 +465,13 @@ static struct ata_probe_ent *vt6421_init_probe_ent(struct pci_dev *pdev)
probe_ent->mwdma_mask = 0x07;
probe_ent->udma_mask = 0x7f;
+ for (i = 0; i < 6; i++)
+ if (!pcim_iomap(pdev, i, 0)) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "failed to iomap PCI BAR %d\n", i);
+ return NULL;
+ }
+
for (i = 0; i < N_PORTS; i++)
vt6421_init_addrs(probe_ent, pcim_iomap_table(pdev), i);
@@ -522,7 +534,7 @@ static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
if (rc)
return rc;
- rc = pcim_iomap_regions(pdev, 0x1f, DRV_NAME);
+ rc = pci_request_regions(pdev, DRV_NAME);
if (rc) {
pcim_pin_device(pdev);
return rc;
diff --git a/drivers/ata/sis.h b/drivers/ata/sis.h
new file mode 100644
index 0000000..231da8f
--- /dev/null
+++ b/drivers/ata/sis.h
@@ -0,0 +1,5 @@
+
+struct ata_port_info;
+
+/* pata_sis.c */
+extern struct ata_port_info sis_info133;
diff --git a/include/linux/ata.h b/include/linux/ata.h
index 272736e..c331da2 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -282,7 +282,6 @@ struct ata_taskfile {
};
#define ata_id_is_ata(id) (((id)[0] & (1 << 15)) == 0)
-#define ata_id_is_sata(id) ((id)[93] == 0)
#define ata_id_rahead_enabled(id) ((id)[85] & (1 << 6))
#define ata_id_wcache_enabled(id) ((id)[85] & (1 << 5))
#define ata_id_hpa_enabled(id) ((id)[85] & (1 << 10))
@@ -324,6 +323,11 @@ static inline unsigned int ata_id_major_version(const u16 *id)
return mver;
}
+static inline int ata_id_is_sata(const u16 *id)
+{
+ return ata_id_major_version(id) >= 5 && id[93] == 0;
+}
+
static inline int ata_id_current_chs_valid(const u16 *id)
{
/* For ATA-1 devices, if the INITIALIZE DEVICE PARAMETERS command
@@ -350,7 +354,7 @@ static inline int ata_id_is_cfa(const u16 *id)
static inline int ata_drive_40wire(const u16 *dev_id)
{
- if (ata_id_major_version(dev_id) >= 5 && ata_id_is_sata(dev_id))
+ if (ata_id_is_sata(dev_id))
return 0; /* SATA */
if ((dev_id[93] & 0xE000) == 0x6000)
return 0; /* 80 wire */
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 86762a9..1f2099d 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -495,6 +495,7 @@ struct ata_device {
/* error history */
struct ata_ering ering;
+ int spdn_cnt;
unsigned int horkage; /* List of broken features */
#ifdef CONFIG_SATA_ACPI
/* ACPI objects info */
@@ -535,8 +536,8 @@ struct ata_port {
spinlock_t *lock;
unsigned long flags; /* ATA_FLAG_xxx */
unsigned int pflags; /* ATA_PFLAG_xxx */
- unsigned int id; /* unique id req'd by scsi midlyr */
- unsigned int port_no; /* unique port #; from zero */
+ unsigned int print_id; /* user visible unique port ID */
+ unsigned int port_no; /* 0 based port no. inside the host */
struct ata_prd *prd; /* our SG list */
dma_addr_t prd_dma; /* and its DMA mapping */
@@ -759,6 +760,7 @@ extern void ata_port_queue_task(struct ata_port *ap, work_func_t fn,
extern u32 ata_wait_register(void __iomem *reg, u32 mask, u32 val,
unsigned long interval_msec,
unsigned long timeout_msec);
+extern unsigned int ata_dev_try_classify(struct ata_port *, unsigned int, u8 *);
/*
* Default driver ops implementations
@@ -890,10 +892,10 @@ extern void ata_do_eh(struct ata_port *ap, ata_prereset_fn_t prereset,
* printk helpers
*/
#define ata_port_printk(ap, lv, fmt, args...) \
- printk(lv"ata%u: "fmt, (ap)->id , ##args)
+ printk(lv"ata%u: "fmt, (ap)->print_id , ##args)
#define ata_dev_printk(dev, lv, fmt, args...) \
- printk(lv"ata%u.%02u: "fmt, (dev)->ap->id, (dev)->devno , ##args)
+ printk(lv"ata%u.%02u: "fmt, (dev)->ap->print_id, (dev)->devno , ##args)
/*
* ata_eh_info helpers
@@ -1031,6 +1033,21 @@ static inline u8 ata_chk_status(struct ata_port *ap)
return ap->ops->check_status(ap);
}
+/**
+ * ata_ncq_enabled - Test whether NCQ is enabled
+ * @dev: ATA device to test for
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ *
+ * RETURNS:
+ * 1 if NCQ is enabled for @dev, 0 otherwise.
+ */
+static inline int ata_ncq_enabled(struct ata_device *dev)
+{
+ return (dev->flags & (ATA_DFLAG_PIO | ATA_DFLAG_NCQ_OFF |
+ ATA_DFLAG_NCQ)) == ATA_DFLAG_NCQ;
+}
/**
* ata_pause - Flush writes and pause 400 nanoseconds.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
