(I'm sorry if the thread breaks, i'm not subscribed)
2007/2/21, Alan <[email protected]>:
Stick some printk calls in drivers/ata/libata-eh.c in ata_eh_suspend, or
turn on all the ATA debug and shutdown, the code should issue a cache
flush followed by a standbynow1 command for each disk.
Alan
Hi! Using netconsole, i was able to capture some printk output.
Following some advices in the net (forum threads about similar
problems), i did this to enable more verbose printk printing:
echo 8 > /proc/sys/kernel/printk
echo 1 > /proc/sys/vm/block_dump
This was the result:
http://bugzilla.kernel.org/attachment.cgi?id=10492&action=view
However, i'm not still sure i enabled as much debugging info as i
could in the kernel configuration. If you need more, please point me
to precise configuration options.
Thanks for your response.
Francesco Pretto
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
