Re: [git patches] libata ACPI support

[Lukas Hejtmanek <xhejtman@mail.muni.cz>]

On Tue, Feb 20, 2007 at 06:49:17PM -0500, Jeff Garzik wrote:
> Can you narrow down the -gitX release further?  i.e. does 2.6.20-git13 
> perform at full speed?  -git13 includes several libata changes, but does 
> not include the ACPI additions.
> 
> Since this is an ACPI execution error in the bug, that would tend to 
> point to bad BIOS tables.  But since there is a performance drop that 
> does not disappear with acpi=off, there might also be another factor, 
> unrelated to ACPI, at play here.

I've noticed on lkm another bug report which has pointed me to this:
ata_piix 0000:00:1f.1: version 2.00ac7
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1f.1 to 64
ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14
ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15
scsi0 : ata_piix
ata1.00: ATA-6: ST9100824A, 3.04, max UDMA/100
ata1.00: 195371568 sectors, multi 16: LBA48
ata1.01: ATAPI, max UDMA/33
ata1.00: configured for UDMA/33
ata1.01: configured for UDMA/33

Both ports are for some reason configured as UDMA/33.

-- 
Lukáš Hejtmánek
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/