At present, various parts of the serial code use unsigned long to
define resource addresses. This is a problem, because some 32-bit
platforms have physical addresses larger than 32-bits, and have mmio
serial uarts located above the 4GB point.
This patch changes the type of mapbase in both struct uart_port and
struct plat_serial8250_port to resource_size_t, which can be
configured to be 64 bits on such platforms. The mapbase in
serial_struct can't safely be changed, because that structure is user
visible.
Signed-off-by: David Gibson <[email protected]>
---
drivers/serial/8250.c | 5 +++--
drivers/serial/8250_early.c | 16 +++++++++-------
drivers/serial/serial_core.c | 9 +++++----
include/linux/serial_8250.h | 2 +-
include/linux/serial_core.h | 2 +-
5 files changed, 19 insertions(+), 15 deletions(-)
Index: working-2.6/include/linux/serial_core.h
===================================================================
--- working-2.6.orig/include/linux/serial_core.h 2007-02-19 11:07:42.000000000 +1100
+++ working-2.6/include/linux/serial_core.h 2007-02-19 11:07:43.000000000 +1100
@@ -273,7 +273,7 @@ struct uart_port {
const struct uart_ops *ops;
unsigned int custom_divisor;
unsigned int line; /* port index */
- unsigned long mapbase; /* for ioremap */
+ resource_size_t mapbase; /* for ioremap */
struct device *dev; /* parent device */
unsigned char hub6; /* this should be in the 8250 driver */
unsigned char unused[3];
Index: working-2.6/drivers/serial/serial_core.c
===================================================================
--- working-2.6.orig/drivers/serial/serial_core.c 2007-02-19 11:07:42.000000000 +1100
+++ working-2.6/drivers/serial/serial_core.c 2007-02-19 11:07:43.000000000 +1100
@@ -633,7 +633,7 @@ static int uart_get_info(struct uart_sta
tmp.hub6 = port->hub6;
tmp.io_type = port->iotype;
tmp.iomem_reg_shift = port->regshift;
- tmp.iomem_base = (void *)port->mapbase;
+ tmp.iomem_base = (void *)(unsigned long)port->mapbase;
if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
return -EFAULT;
@@ -1673,10 +1673,11 @@ static int uart_line_info(char *buf, str
return 0;
mmio = port->iotype >= UPIO_MEM;
- ret = sprintf(buf, "%d: uart:%s %s%08lX irq:%d",
+ ret = sprintf(buf, "%d: uart:%s %s%08llX irq:%d",
port->line, uart_type(port),
mmio ? "mmio:0x" : "port:",
- mmio ? port->mapbase : (unsigned long) port->iobase,
+ mmio ? (unsigned long long)port->mapbase
+ : (unsigned long long) port->iobase,
port->irq);
if (port->type == PORT_UNKNOWN) {
@@ -2069,7 +2070,7 @@ uart_report_port(struct uart_driver *drv
case UPIO_AU:
case UPIO_TSI:
snprintf(address, sizeof(address),
- "MMIO 0x%lx", port->mapbase);
+ "MMIO 0x%llx", (unsigned long long)port->mapbase);
break;
default:
strlcpy(address, "*unknown*", sizeof(address));
Index: working-2.6/drivers/serial/8250_early.c
===================================================================
--- working-2.6.orig/drivers/serial/8250_early.c 2007-02-19 11:07:40.000000000 +1100
+++ working-2.6/drivers/serial/8250_early.c 2007-02-19 11:07:43.000000000 +1100
@@ -145,8 +145,9 @@ static int __init parse_options(struct e
port->mapbase = simple_strtoul(options + 5, &options, 0);
port->membase = ioremap(port->mapbase, mapsize);
if (!port->membase) {
- printk(KERN_ERR "%s: Couldn't ioremap 0x%lx\n",
- __FUNCTION__, port->mapbase);
+ printk(KERN_ERR "%s: Couldn't ioremap 0x%llx\n",
+ __FUNCTION__,
+ (unsigned long long)port->mapbase);
return -ENOMEM;
}
mmio = 1;
@@ -168,9 +169,10 @@ static int __init parse_options(struct e
device->baud);
}
- printk(KERN_INFO "Early serial console at %s 0x%lx (options '%s')\n",
+ printk(KERN_INFO "Early serial console at %s 0x%llx (options '%s')\n",
mmio ? "MMIO" : "I/O port",
- mmio ? port->mapbase : (unsigned long) port->iobase,
+ mmio ? (unsigned long long) port->mapbase
+ : (unsigned long long) port->iobase,
device->options);
return 0;
}
@@ -236,10 +238,10 @@ static int __init early_uart_console_swi
mmio = (port->iotype == UPIO_MEM);
line = serial8250_start_console(port, device->options);
if (line < 0)
- printk("No ttyS device at %s 0x%lx for console\n",
+ printk("No ttyS device at %s 0x%llx for console\n",
mmio ? "MMIO" : "I/O port",
- mmio ? port->mapbase :
- (unsigned long) port->iobase);
+ mmio ? (unsigned long long) port->mapbase
+ : (unsigned long long) port->iobase);
unregister_console(&early_uart_console);
if (mmio)
Index: working-2.6/include/linux/serial_8250.h
===================================================================
--- working-2.6.orig/include/linux/serial_8250.h 2007-02-19 11:07:40.000000000 +1100
+++ working-2.6/include/linux/serial_8250.h 2007-02-19 11:07:43.000000000 +1100
@@ -20,7 +20,7 @@
struct plat_serial8250_port {
unsigned long iobase; /* io base address */
void __iomem *membase; /* ioremap cookie or NULL */
- unsigned long mapbase; /* resource base */
+ resource_size_t mapbase; /* resource base */
unsigned int irq; /* interrupt number */
unsigned int uartclk; /* UART clock rate */
unsigned char regshift; /* register shift */
Index: working-2.6/drivers/serial/8250.c
===================================================================
--- working-2.6.orig/drivers/serial/8250.c 2007-02-19 11:07:40.000000000 +1100
+++ working-2.6/drivers/serial/8250.c 2007-02-19 11:07:43.000000000 +1100
@@ -2550,8 +2550,9 @@ static int __devinit serial8250_probe(st
ret = serial8250_register_port(&port);
if (ret < 0) {
dev_err(&dev->dev, "unable to register port at index %d "
- "(IO%lx MEM%lx IRQ%d): %d\n", i,
- p->iobase, p->mapbase, p->irq, ret);
+ "(IO%lx MEM%llx IRQ%d): %d\n", i,
+ p->iobase, (unsigned long long)p->mapbase,
+ p->irq, ret);
}
}
return 0;
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
