Re: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen with pata_amd

[Prakash Punnoor <prakash@punnoor.de>]

Am Samstag 17 Februar 2007 schrieb Prakash Punnoor:
> Am Samstag 17 Februar 2007 schrieb Prakash Punnoor:
> > Hi,
> >
> > I tried a cat /dev/sdb1 >/dev/null from a Sandisk Extreme III CF card
> > connected via cf to IDE adapteer to onboard ide of nforce c51. I am usinf
> > 2.6.20 on x86_64. For a few seconds it worked but then it dropped to
> > pio4:
> >
> > ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
> > ata3.00: (BMDMA stat 0x65)
> > ata3.00: cmd c8/00:80:1f:7d:01/00:00:00:00:00/e0 tag 0 cdb 0x0 data 65536
> > in res 58/00:00:9e:7d:01/00:00:00:00:00/e0 Emask 0x2 (HSM violation)
> > ata3: soft resetting port
> > ata3.00: simplex DMA is claimed by other device, disabling DMA
> > ata3.00: configured for PIO4
> > ata3: EH complete
> > SCSI device sdb: 2001888 512-byte hdwr sectors (1025 MB)
> > sdb: Write Protect is off
> > sdb: Mode Sense: 00 3a 00 00
> > SCSI device sdb: write cache: enabled, read cache: enabled, doesn't
> > support DPO or FUA
> >
[...]
>
> The ide driver worked better - for a short time and then this happens:
>
> hda: dma_intr: status=0x58 { DriveReady SeekComplete DataRequest }
> ide: failed opcode was: unknown
> hda: DMA disabled

I connected the cf to ide adapter to an ide to sata adapter and using this 
combination on sata_nv makes no troubkes whatsoever. So what goues wrong with 
pata_amd/amd ide driver? BTW, I found specs for the cf card on the sandisk 
website. Perhaps someone wants to check whether the amd drivers deal 
corretcly with the true ide mode implemented in the cf card?

http://www.sandisk.com/Assets/File/OEM/Manuals/ProdManCFlashv11.0.pdf


scsi 1:0:0:0: Direct-Access     ATA      SanDisk SDCFX-10 HDX  PQ: 0 ANSI: 5
SCSI device sdb: 2001888 512-byte hdwr sectors (1025 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support 
DPO or FUA
SCSI device sdb: 2001888 512-byte hdwr sectors (1025 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support 
DPO or FUA
 sdb: sdb1
sd 1:0:0:0: Attached scsi removable disk sdb
sd 1:0:0:0: Attached scsi generic sg1 type 0


-- 
(°=                 =°)
//\ Prakash Punnoor /\\
V_/                 \_V

Attachment: pgpzLRfCuFY13.pgp
Description: PGP signature