diff -auNrp tmp-from/drivers/mtd/ubi/io.c tmp-to/drivers/mtd/ubi/io.c
--- tmp-from/drivers/mtd/ubi/io.c 1970-01-01 02:00:00.000000000 +0200
+++ tmp-to/drivers/mtd/ubi/io.c 2007-02-17 18:07:26.000000000 +0200
@@ -0,0 +1,1297 @@
+/*
+ * Copyright (c) International Business Machines Corp., 2006
+ * Copyright (C) Nokia Corporation, 2006,2007
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Author: Artem B. Bityutskiy
+ */
+
+#include <linux/crc32.h>
+#include <linux/wait.h>
+#include <linux/sched.h>
+#include <linux/err.h>
+#include <linux/mtd/mtd.h>
+#include <linux/types.h>
+#include <mtd/ubi-header.h>
+#include "ubi.h"
+#include "alloc.h"
+#include "io.h"
+#include "misc.h"
+#include "debug.h"
+
+/*
+ * In case of an input/output error, UBI tries to repeat the operation several
+ * times before returning error. The below constant defines how many times
+ * UBI re-tries.
+ */
+#define IO_RETRIES 3
+
+/*
+ * "Paranoid" checks of the UBI I/O unit. Note, they substantially slow down
+ * the system.
+ */
+#ifdef CONFIG_MTD_UBI_DEBUG_PARANOID_IO
+
+static int paranoid_check_not_bad(const struct ubi_info *ubi, int pnum);
+static int paranoid_check_peb_ec_hdr(const struct ubi_info *ubi, int pnum);
+static int paranoid_check_ec_hdr(const struct ubi_info *ubi, int pnum,
+ const struct ubi_ec_hdr *ec_hdr);
+static int paranoid_check_peb_vid_hdr(const struct ubi_info *ubi, int pnum);
+static int paranoid_check_vid_hdr(const struct ubi_info *ubi, int pnum,
+ const struct ubi_vid_hdr *vid_hdr);
+static int paranoid_check_all_ff(const struct ubi_info *ubi, int pnum,
+ int offset, int len);
+#else
+#define paranoid_check_not_bad(ubi, pnum) 0
+#define paranoid_check_peb_ec_hdr(ubi, pnum) 0
+#define paranoid_check_ec_hdr(ubi, pnum, ec_hdr) 0
+#define paranoid_check_peb_vid_hdr(ubi, pnum) 0
+#define paranoid_check_vid_hdr(ubi, pnum, vid_hdr) 0
+#define paranoid_check_all_ff(ubi, pnum, offset, len) 0
+#endif /* !CONFIG_MTD_UBI_DEBUG_PARANOID_IO */
+
+/**
+ * mtd_read - read data from flash.
+ *
+ * @io: I/O unit description object
+ * @buf: a buffer where to store the read data
+ * @pnum: physical eraseblock number to read from
+ * @offset: offset to read from
+ * @len: how many bytes to read
+ * @read: how many bytes were actually read is returned here
+ *
+ * This is a simple wrapper over mtd->read().
+ */
+static inline int mtd_read(const struct ubi_io_info *io, void *buf,
+ int pnum, int offset, int len, size_t *read)
+{
+ loff_t addr = (loff_t)pnum * io->peb_size + offset;
+
+ return io->mtd->read(io->mtd, addr, len, read, buf);
+}
+
+/**
+ * mtd_write - write data to flash.
+ *
+ * @io: I/O unit description object
+ * @buf: the data to write
+ * @pnum: physical eraseblock number to write to
+ * @offset: offset to write to
+ * @len: how many bytes to write
+ * @written: how many bytes were actually written
+ *
+ * This is a simple wrapper over mtd->write().
+ */
+static inline int mtd_write(const struct ubi_io_info *io, const void *buf,
+ int pnum, int offset, int len, size_t *written)
+{
+ loff_t addr = (loff_t)pnum * io->peb_size + offset;
+
+ return io->mtd->write(io->mtd, addr, len, written, buf);
+}
+
+int ubi_io_read(const struct ubi_info *ubi, void *buf, int pnum, int offset,
+ int len)
+{
+ int err, tries = 0;
+ size_t read;
+ const struct ubi_io_info *io = ubi->io;
+
+ dbg_io("read %d bytes from PEB %d:%d", len, pnum, offset);
+
+ ubi_assert(pnum >= 0 && pnum < io->peb_count);
+ ubi_assert(offset >= 0 && offset + len <= io->peb_size);
+ ubi_assert(len > 0);
+
+ err = paranoid_check_not_bad(ubi, pnum);
+ if (unlikely(err))
+ return err > 0 ? -EINVAL : err;
+
+retry:
+ err = mtd_read(io, buf, pnum, offset, len, &read);
+ if (unlikely(err)) {
+ if (err == -EUCLEAN) {
+ /*
+ * -EUCLEAN is reported if there was a bit-flip which
+ * was corrected, so this is harmless.
+ */
+ dbg_io("bit-flip occurred");
+ return UBI_IO_BITFLIPS;
+ }
+
+ if (read != len && tries++ < IO_RETRIES) {
+ yield();
+ dbg_io("error %d while reading %d bytes from PEB %d:%d, "
+ "read only %zd bytes, retry",
+ err, len, pnum, offset, read);
+ goto retry;
+ }
+
+ ubi_err("error %d while reading %d bytes from PEB %d:%d, "
+ "read %zd bytes", err, len, pnum, offset, read);
+ ubi_dbg_dump_stack();
+ } else {
+ ubi_assert(len == read);
+
+ /*
+ * The below is just for debugging and is compiled out if
+ * disabled.
+ */
+ if (ubi_dbg_is_bitflip()) {
+ dbg_io("emulate bit-flip");
+ err = UBI_IO_BITFLIPS;
+ }
+ }
+
+ return err;
+}
+
+int ubi_io_write(const struct ubi_info *ubi, const void *buf, int pnum,
+ int offset, int len)
+{
+ int err;
+ size_t written;
+ const struct ubi_io_info *io = ubi->io;
+
+ dbg_io("write %d bytes to PEB %d:%d", len, pnum, offset);
+
+ ubi_assert(pnum >= 0 && pnum < io->peb_count);
+ ubi_assert(offset >= 0 && offset + len <= io->peb_size);
+ ubi_assert(offset % io->hdrs_min_io_size == 0);
+ ubi_assert(len > 0 && len % io->hdrs_min_io_size == 0);
+
+ if (unlikely(io->ro_mode)) {
+ ubi_err("read-only mode");
+ return -EROFS;
+ }
+
+ /* The below has to be compiled out if paranoid checks are disabled */
+
+ err = paranoid_check_not_bad(ubi, pnum);
+ if (unlikely(err))
+ return err > 0 ? -EINVAL : err;
+
+ /* The area we are writing to has to contain all 0xFF bytes */
+ err = paranoid_check_all_ff(ubi, pnum, offset, len);
+ if (unlikely(err))
+ return err > 0 ? -EINVAL : err;
+
+ if (offset >= io->leb_start) {
+ /*
+ * We write to the data area of the physical eraseblock. Make
+ * sure it has valid EC and VID headers.
+ */
+ err = paranoid_check_peb_ec_hdr(ubi, pnum);
+ if (unlikely(err))
+ return err > 0 ? -EINVAL : err;
+ err = paranoid_check_peb_vid_hdr(ubi, pnum);
+ if (unlikely(err))
+ return err > 0 ? -EINVAL : err;
+ }
+
+ /* The below is just for debugging and is compiled out if disabled */
+ if (ubi_dbg_is_write_failure()) {
+ ubi_err("cannot write %d bytes to PEB %d:%d "
+ "(emulated)", len, pnum, offset);
+ ubi_dbg_dump_stack();
+ return -EIO;
+ }
+
+ err = mtd_write(io, buf, pnum, offset, len, &written);
+ if (unlikely(err)) {
+ ubi_err("error %d while writing %d bytes to PEB %d:%d, written"
+ " %zd bytes", err, len, pnum, offset, written);
+ ubi_dbg_dump_stack();
+ } else
+ ubi_assert(written == len);
+
+ return err;
+}
+
+static void erase_callback(struct erase_info *ei)
+{
+ wake_up_interruptible((wait_queue_head_t *)ei->priv);
+}
+
+static int sync_erase(const struct ubi_info *ubi, int pnum);
+static int ubi_io_torture_peb(const struct ubi_info *ubi, int pnum);
+
+int ubi_io_sync_erase(const struct ubi_info *ubi, int pnum, int torture)
+{
+ int err, ret = 0;
+
+ ubi_assert(pnum >= 0 && pnum < ubi->io->peb_count);
+
+ if (unlikely(ubi->io->ro_mode)) {
+ ubi_err("read-only mode");
+ return -EROFS;
+ }
+
+ if (torture) {
+ ret = ubi_io_torture_peb(ubi, pnum);
+ if (unlikely(ret < 0))
+ return ret;
+ }
+
+ err = sync_erase(ubi, pnum);
+ if (unlikely(err))
+ return err;
+
+ return ret + 1;
+}
+
+int ubi_io_is_bad(const struct ubi_info *ubi, int pnum)
+{
+ const struct ubi_io_info *io = ubi->io;
+ struct mtd_info *mtd = io->mtd;
+
+ ubi_assert(pnum >= 0 && pnum < io->peb_count);
+
+ if (io->bad_allowed) {
+ int ret;
+
+ ret = mtd->block_isbad(mtd, (loff_t)pnum * io->peb_size);
+ if (unlikely(ret < 0))
+ ubi_err("error %d while checking if PEB %d is bad",
+ ret, pnum);
+ else if (ret)
+ dbg_io("PEB %d is bad", pnum);
+ return ret;
+ }
+
+ return 0;
+}
+
+int ubi_io_mark_bad(const struct ubi_info *ubi, int pnum)
+{
+ int err;
+ const struct ubi_io_info *io = ubi->io;
+ struct mtd_info *mtd = io->mtd;
+
+ ubi_assert(pnum >= 0 && pnum < io->peb_count);
+
+ if (unlikely(io->ro_mode)) {
+ ubi_err("read-only mode");
+ return -EROFS;
+ }
+
+ if (!io->bad_allowed)
+ return 0;
+
+ err = mtd->block_markbad(mtd, (loff_t)pnum * io->peb_size);
+ if (unlikely(err))
+ ubi_err("cannot mark PEB %d bad, error %d", pnum, err);
+ return err;
+}
+
+static int validate_ec_hdr(const struct ubi_info *ubi,
+ const struct ubi_ec_hdr *ec_hdr);
+
+int ubi_io_read_ec_hdr(const struct ubi_info *ubi, int pnum,
+ struct ubi_ec_hdr *ec_hdr, int verbose)
+{
+ int err, read_err = 0;
+ uint32_t crc, magic, hdr_crc;
+
+ dbg_io("read EC header from PEB %d", pnum);
+
+ ubi_assert(pnum >= 0 && pnum < ubi->io->peb_count);
+
+ err = ubi_io_read(ubi, ec_hdr, pnum, 0, UBI_EC_HDR_SIZE);
+ if (unlikely(err)) {
+ if (err != UBI_IO_BITFLIPS && err != -EBADMSG)
+ return err;
+
+ /*
+ * We read all the data, but either a correctable bit-flip
+ * occurred, or MTD reported about some data integrity error,
+ * like an ECC error in case of NAND. The former is harmless,
+ * the later may mean that the read data is corrupted. But we
+ * have a CRC check-sum and we will identify this. If the EC
+ * header is still OK, we just report this as there was a
+ * bit-flip.
+ */
+ read_err = err;
+ }
+
+ magic = ubi32_to_cpu(ec_hdr->magic);
+ if (unlikely(magic != UBI_EC_HDR_MAGIC)) {
+
+ /*
+ * The magic field is wrong. Let's check if we have read all
+ * 0xFF. If yes, this physical eraseblock is assumed to be
+ * empty.
+ *
+ * But if there was a read error, we do not test it for all
+ * 0xFFs. Even if it does contain all 0xFFs, this error
+ * indicates that something is still wrong with this physical
+ * eraseblock anyway.
+ */
+ if (likely(read_err != -EBADMSG) &&
+ ubi_buf_all_ff(ec_hdr, UBI_EC_HDR_SIZE)) {
+ /* The physical eraseblock is supposedly empty. But */
+
+ /*
+ * The below is just a paranoid check, it has to be
+ * compiled out if paranoid checks are disabled.
+ */
+ err = paranoid_check_all_ff(ubi, pnum, 0,
+ ubi->io->peb_size);
+ if (unlikely(err))
+ return err > 0 ? UBI_IO_BAD_EC_HDR : err;
+
+ if (verbose)
+ ubi_warn("no EC header found at PEB %d, "
+ "only 0xFF bytes", pnum);
+
+ /*
+ * We read all 0xFFs, so assume the eraseblock is
+ * empty.
+ */
+ return UBI_IO_PEB_EMPTY;
+ }
+
+ /*
+ * This is not a valid erase counter header, and these are not
+ * 0xFF bytes. Report that the header is corrupted.
+ */
+ if (verbose) {
+ ubi_warn("bad magic number at PEB %d: %08x instead of "
+ "%08x", pnum, magic, UBI_EC_HDR_MAGIC);
+ ubi_dbg_dump_ec_hdr(ec_hdr);
+ }
+ return UBI_IO_BAD_EC_HDR;
+ }
+
+ crc = crc32(UBI_CRC32_INIT, ec_hdr, UBI_EC_HDR_SIZE_CRC);
+ hdr_crc = ubi32_to_cpu(ec_hdr->hdr_crc);
+
+ if (unlikely(hdr_crc != crc)) {
+ if (verbose) {
+ ubi_warn("bad EC header CRC at PEB %d, calculated %#08x,"
+ " read %#08x", pnum, crc, hdr_crc);
+ ubi_dbg_dump_ec_hdr(ec_hdr);
+ }
+ return UBI_IO_BAD_EC_HDR;
+ }
+
+ /* Validate what was read from the media */
+ err = validate_ec_hdr(ubi, ec_hdr);
+ if (unlikely(err > 0)) {
+ ubi_err("validation failed for PEB %d", pnum);
+ return -EINVAL;
+ }
+
+ return read_err ? UBI_IO_BITFLIPS : 0;
+}
+
+int ubi_io_write_ec_hdr(const struct ubi_info *ubi, int pnum,
+ struct ubi_ec_hdr *ec_hdr)
+{
+ int err;
+ uint32_t crc;
+ const struct ubi_io_info *io = ubi->io;
+
+ dbg_io("write EC header to PEB %d", pnum);
+
+ ubi_assert(pnum >= 0 && pnum < io->peb_count);
+
+ ec_hdr->magic = cpu_to_ubi32(UBI_EC_HDR_MAGIC);
+ ec_hdr->version = UBI_VERSION;
+ ec_hdr->vid_hdr_offset = cpu_to_ubi32(io->vid_hdr_offset);
+ ec_hdr->data_offset = cpu_to_ubi32(io->leb_start);
+ crc = crc32(UBI_CRC32_INIT, ec_hdr, UBI_EC_HDR_SIZE_CRC);
+ ec_hdr->hdr_crc = cpu_to_ubi32(crc);
+
+ err = paranoid_check_ec_hdr(ubi, pnum, ec_hdr);
+ if (unlikely(err))
+ return -EINVAL;
+
+ err = ubi_io_write(ubi, ec_hdr, pnum, 0, io->ec_hdr_alsize);
+ return err;
+}
+
+static int validate_vid_hdr(const struct ubi_info *ubi,
+ const struct ubi_vid_hdr *vid_hdr);
+
+int ubi_io_read_vid_hdr(const struct ubi_info *ubi, int pnum,
+ struct ubi_vid_hdr *vid_hdr, int verbose)
+{
+ int err, read_err = 0;
+ uint32_t crc, magic, hdr_crc;
+ const struct ubi_io_info *io = ubi->io;
+ void *p;
+
+ dbg_io("read VID header from PEB %d", pnum);
+
+ ubi_assert(pnum >= 0 && pnum < io->peb_count);
+
+ p = (char *)vid_hdr - io->vid_hdr_shift;
+ err = ubi_io_read(ubi, p, pnum, io->vid_hdr_aloffset,
+ io->vid_hdr_alsize);
+ if (unlikely(err)) {
+ if (err != UBI_IO_BITFLIPS && err != -EBADMSG)
+ return err;
+
+ /*
+ * We read all the data, but either a correctable bit-flip
+ * occurred, or MTD reported about some data integrity error,
+ * like an ECC error in case of NAND. The former is harmless,
+ * the later may mean the read data is corrupted. But we have a
+ * CRC check-sum and we will identify this. If the VID header is
+ * still OK, we just report this as there was a bit-flip.
+ */
+ read_err = err;
+ }
+
+ magic = ubi32_to_cpu(vid_hdr->magic);
+ if (unlikely(magic != UBI_VID_HDR_MAGIC)) {
+ /*
+ * If we have read all 0xFF bytes, the VID header probably does
+ * not exist and the physical eraseblock is assumed to be free.
+ *
+ * But if there was a read error, we do not test the data for
+ * 0xFFs. Even if it does contain all 0xFFs, this error
+ * indicates that something is still wrong with this physical
+ * eraseblock.
+ */
+ if (likely(read_err != -EBADMSG) &&
+ ubi_buf_all_ff(vid_hdr, UBI_VID_HDR_SIZE)) {
+ /* The physical eraseblock is supposedly free */
+
+ /*
+ * The below is just a paranoid check, it has to be
+ * compiled out if paranoid checks are disabled.
+ */
+ err = paranoid_check_all_ff(ubi, pnum, io->leb_start,
+ io->leb_size);
+ if (unlikely(err))
+ return err > 0 ? UBI_IO_BAD_VID_HDR : err;
+
+ /*
+ * We read all 0xFFs, so assume the eraseblock is
+ * free.
+ */
+ if (verbose)
+ ubi_warn("no VID header found at PEB %d, "
+ "only 0xFF bytes", pnum);
+ return UBI_IO_PEB_FREE;
+ }
+
+ /*
+ * This is not a valid VID header, and these are not 0xFF
+ * bytes. Report that the header is corrupted.
+ */
+ if (verbose) {
+ ubi_warn("bad magic number at PEB %d: %08x instead of "
+ "%08x", pnum, magic, UBI_VID_HDR_MAGIC);
+ ubi_dbg_dump_vid_hdr(vid_hdr);
+ }
+ return UBI_IO_BAD_VID_HDR;
+ }
+
+ crc = crc32(UBI_CRC32_INIT, vid_hdr, UBI_VID_HDR_SIZE_CRC);
+ hdr_crc = ubi32_to_cpu(vid_hdr->hdr_crc);
+
+ if (unlikely(hdr_crc != crc)) {
+ if (verbose) {
+ ubi_warn("bad CRC at PEB %d, calculated %#08x, "
+ "read %#08x", pnum, crc, hdr_crc);
+ ubi_dbg_dump_vid_hdr(vid_hdr);
+ }
+ return UBI_IO_BAD_VID_HDR;
+ }
+
+ /* Validate the VID header that we have just read */
+ err = validate_vid_hdr(ubi, vid_hdr);
+ if (unlikely(err)) {
+ ubi_err("validation failed for PEB %d", pnum);
+ return -EINVAL;
+ }
+
+ return read_err ? UBI_IO_BITFLIPS : 0;
+}
+
+int ubi_io_write_vid_hdr(const struct ubi_info *ubi, int pnum,
+ struct ubi_vid_hdr *vid_hdr)
+{
+ int err;
+ uint32_t crc;
+ const struct ubi_io_info *io = ubi->io;
+ void *p;
+
+ dbg_io("write VID header to PEB %d", pnum);
+
+ ubi_assert(pnum >= 0 && pnum < io->peb_count);
+
+ err = paranoid_check_peb_ec_hdr(ubi, pnum);
+ if (unlikely(err))
+ return err > 0 ? -EINVAL: err;
+
+ vid_hdr->magic = cpu_to_ubi32(UBI_VID_HDR_MAGIC);
+ vid_hdr->version = UBI_VERSION;
+ crc = crc32(UBI_CRC32_INIT, vid_hdr, UBI_VID_HDR_SIZE_CRC);
+ vid_hdr->hdr_crc = cpu_to_ubi32(crc);
+
+ err = paranoid_check_vid_hdr(ubi, pnum, vid_hdr);
+ if (unlikely(err))
+ return -EINVAL;
+
+ p = (char *)vid_hdr - io->vid_hdr_shift;
+ err = ubi_io_write(ubi, p, pnum, io->vid_hdr_aloffset,
+ io->vid_hdr_alsize);
+ return err;
+}
+
+int ubi_io_init(struct ubi_info *ubi, int mtd_num, int vid_hdr_offset,
+ int data_offset)
+{
+ int err;
+ struct mtd_info *mtd;
+ struct ubi_io_info *io;
+
+ dbg_io("initialize the UBI I/O unit for MTD device %d, VID hdr offset "
+ "%d data offset %d", mtd_num, vid_hdr_offset, data_offset);
+
+ io = ubi_kzalloc(sizeof(struct ubi_io_info));
+ if (!io)
+ return -ENOMEM;
+ ubi->io = io;
+
+ mtd = io->mtd = get_mtd_device(NULL, mtd_num);
+ if (IS_ERR(mtd)) {
+ ubi_err("cannot open MTD device %d", mtd_num);
+ err = PTR_ERR(mtd);
+ goto out_io;
+ }
+ io->mtd_num = mtd_num;
+
+ err = -EINVAL;
+ if (mtd->numeraseregions != 0) {
+ /*
+ * Some flashes have several erase regions. Different regions
+ * may have different eraseblock size and other
+ * characteristics. It looks like mostly multi-region flashes
+ * have one "main" region and one or more small regions to
+ * store boot loader code or boot parameters or whatever. I
+ * guess we should just pick the largest region. But this is
+ * not implemented.
+ */
+ ubi_err("multiple regions, not implemented");
+ goto out_mtd;
+ }
+
+ /*
+ * Note, in this implementation we support MTD devices with 0x7FFFFFFF
+ * physical eraseblocks maximum.
+ */
+
+ io->mtd_name = mtd->name;
+ io->peb_size = mtd->erasesize;
+ io->peb_count = mtd->size / mtd->erasesize;
+ io->flash_size = mtd->size;
+
+ if (mtd->block_isbad && mtd->block_markbad)
+ io->bad_allowed = 1;
+
+ io->min_io_size = mtd->writesize;
+ io->hdrs_min_io_size = mtd->writesize >> mtd->subpage_sft;
+
+ ubi_assert(io->hdrs_min_io_size > 0);
+ ubi_assert(io->hdrs_min_io_size <= io->min_io_size);
+ ubi_assert(io->min_io_size % io->hdrs_min_io_size == 0);
+
+ /* Calculate default aligned sizes of EC and VID headers */
+ io->ec_hdr_alsize = align_up(UBI_EC_HDR_SIZE, io->hdrs_min_io_size);
+ io->vid_hdr_alsize = align_up(UBI_VID_HDR_SIZE, io->hdrs_min_io_size);
+
+ dbg_io("min_io_size %d", io->min_io_size);
+ dbg_io("hdrs_min_io_size %d", io->hdrs_min_io_size);
+ dbg_io("ec_hdr_alsize %d", io->ec_hdr_alsize);
+ dbg_io("vid_hdr_alsize %d", io->vid_hdr_alsize);
+
+ if (vid_hdr_offset == 0)
+ /* Default offset */
+ io->vid_hdr_offset = io->vid_hdr_aloffset = io->ec_hdr_alsize;
+ else {
+ io->vid_hdr_offset = vid_hdr_offset;
+ io->vid_hdr_aloffset = align_down(vid_hdr_offset,
+ io->hdrs_min_io_size);
+ io->vid_hdr_shift = vid_hdr_offset - io->vid_hdr_aloffset;
+ }
+
+ /* Similar for the data offset */
+ if (data_offset == 0) {
+ io->leb_start = io->vid_hdr_offset + io->vid_hdr_alsize;
+ io->leb_start = align_up(io->leb_start, io->min_io_size);
+ } else
+ io->leb_start = data_offset;
+
+ dbg_io("vid_hdr_offset %d", io->vid_hdr_offset);
+ dbg_io("vid_hdr_aloffset %d", io->vid_hdr_aloffset);
+ dbg_io("vid_hdr_shift %d", io->vid_hdr_shift);
+ dbg_io("leb_start %d", io->leb_start);
+
+ /* The shift must be aligned to 32-bit boundary */
+ if (io->vid_hdr_shift % 4) {
+ ubi_err("unaligned VID header shift %d",
+ io->vid_hdr_shift);
+ goto out_mtd;
+ }
+
+ /* Check sanity */
+ if (io->vid_hdr_offset < UBI_EC_HDR_SIZE ||
+ io->leb_start < io->vid_hdr_offset + UBI_VID_HDR_SIZE ||
+ io->leb_start > io->peb_size - UBI_VID_HDR_SIZE ||
+ io->leb_start % io->min_io_size) {
+ ubi_err("bad VID header (%d) or data offsets (%d)",
+ io->vid_hdr_offset, io->leb_start);
+ goto out_mtd;
+ }
+
+ /*
+ * It may happen that EC and VID headers are situated in one minimal
+ * I/O unit. In this case we can only accept this UBI image in
+ * read-only mode.
+ */
+ if (io->vid_hdr_offset + UBI_VID_HDR_SIZE <= io->hdrs_min_io_size) {
+ ubi_warn("EC and VID headers are in the same minimal I/O unit, "
+ "switch to read-only mode");
+ io->ro_mode = 1;
+ }
+
+ io->leb_size = io->peb_size - io->leb_start;
+
+ if (!(mtd->flags & MTD_WRITEABLE)) {
+ ubi_msg("MTD device %d is write-protected, attach in "
+ "read-only mode", mtd_num);
+ io->ro_mode = 1;
+ }
+
+ dbg_io("leb_size %d", io->leb_size);
+ dbg_io("ro_mode %d", io->ro_mode);
+
+ /*
+ * FIXME: ideally, we have to initialize io->bad_peb_count here. But
+ * unfortunately, MTD does not provide this information. We should loop
+ * over all physical eraseblocks and invoke mtd->block_is_bad() which
+ * is not optimal. So, we skip io->bad_peb_count uninitialized and let
+ * the scanning unit to initialize it. This is not nice.
+ */
+
+ dbg_io("the UBI I/O unit is initialized");
+ return 0;
+
+out_mtd:
+ put_mtd_device(mtd);
+out_io:
+ ubi_kfree(io);
+ return err;
+}
+
+void ubi_io_close(const struct ubi_info *ubi)
+{
+ const struct ubi_io_info *io = ubi->io;
+
+ dbg_io("close the UBI I/O unit for mtd device %d", io->mtd_num);
+ put_mtd_device(io->mtd);
+ ubi_kfree(io);
+}
+
+/**
+ * sync_erase - synchronously erase a physical eraseblock.
+ *
+ * @ubi: the UBI device description object
+ * @pnum: the physical eraseblock number to erase
+ *
+ * This function synchronously erases physical eraseblock @pnum and returns
+ * zero in case of success and a negative error code in case of failure. If
+ * %-EIO is returned, the physical eraseblock went bad.
+ */
+static int sync_erase(const struct ubi_info *ubi, int pnum)
+{
+ int err, tries = 0;
+ struct erase_info ei;
+ wait_queue_head_t wq;
+ const struct ubi_io_info *io = ubi->io;
+
+ /*
+ * Note, even though MTD erase interface is asynchronous, all the
+ * current implementations are synchronous.
+ */
+
+ dbg_io("erase PEB %d", pnum);
+
+ ubi_assert(pnum >= 0 && pnum < io->peb_count);
+
+ err = paranoid_check_not_bad(ubi, pnum);
+ if (unlikely(err != 0))
+ return err > 0 ? -EINVAL : err;
+
+retry:
+ init_waitqueue_head(&wq);
+ memset(&ei, 0, sizeof(struct erase_info));
+
+ ei.mtd = io->mtd;
+ ei.addr = pnum * io->peb_size;
+ ei.len = io->peb_size;
+ ei.retries = 2;
+ ei.callback = erase_callback;
+ ei.priv = (unsigned long)&wq;
+
+ err = io->mtd->erase(io->mtd, &ei);
+ if (unlikely(err)) {
+ if (tries++ < IO_RETRIES) {
+ yield();
+ dbg_io("error %d while erasing PEB %d, retry",
+ err, pnum);
+ goto retry;
+ }
+ ubi_err("cannot erase PEB %d, error %d", pnum, err);
+ ubi_dbg_dump_stack();
+ return err;
+ }
+
+ err = wait_event_interruptible(wq, ei.state == MTD_ERASE_DONE ||
+ ei.state == MTD_ERASE_FAILED);
+ if (unlikely(err)) {
+ ubi_err("interrupted PEB %d erasure", pnum);
+ return -EINTR;
+ }
+
+ if (unlikely(ei.state == MTD_ERASE_FAILED)) {
+ if (tries++ < IO_RETRIES) {
+ yield();
+ dbg_io("error while erasing PEB %d, retry", pnum);
+ goto retry;
+ }
+ ubi_err("cannot erase PEB %d", pnum);
+ ubi_dbg_dump_stack();
+ return -EIO;
+ }
+
+ err = paranoid_check_all_ff(ubi, pnum, 0, io->peb_size);
+ if (unlikely(err))
+ return err > 0 ? -EINVAL : err;
+
+ /* The below is just for debugging and is compiled out if disabled */
+ if (ubi_dbg_is_erase_failure() && !err) {
+ ubi_err("cannot erase PEB %d (emulated)", pnum);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+/* Patterns to write to a physical eraseblock when torturing it */
+static uint8_t patterns[] = {0xa5, 0x5a, 0x0};
+
+/**
+ * ubi_io_torture_peb - test a supposedly bad physical eraseblock.
+ *
+ * @ubi: the UBI device description object
+ * @pnum: the physical eraseblock number to test
+ *
+ * This function returns %-EIO if the physical eraseblock did not pass the
+ * test, a positive number of erase operations done if the test was
+ * successfully passed, and other negative error codes in case of other errors.
+ */
+static int ubi_io_torture_peb(const struct ubi_info *ubi, int pnum)
+{
+ void *buf;
+ int err, i, patt_count;
+ const struct ubi_io_info *io = ubi->io;
+
+ buf = ubi_kmalloc(io->peb_size);
+ if (unlikely(!buf))
+ return -ENOMEM;
+
+ patt_count = ARRAY_SIZE(patterns);
+ ubi_assert(patt_count > 0);
+
+ for (i = 0; i < patt_count; i++) {
+ err = sync_erase(ubi, pnum);
+ if (unlikely(err))
+ goto out;
+
+ /* Make sure the PEB contains only 0xFF bytes */
+ err = ubi_io_read(ubi, buf, pnum, 0, io->peb_size);
+ if (unlikely(err))
+ goto out;
+
+ err = ubi_buf_all_ff(buf, io->peb_size);
+ if (unlikely(err == 0)) {
+ ubi_err("erased PEB %d, but a non-0xFF byte found",
+ pnum);
+ err = -EIO;
+ goto out;
+ }
+
+ /* Write a pattern and check it */
+ memset(buf, patterns[i], io->peb_size);
+ err = ubi_io_write(ubi, buf, pnum, 0, io->peb_size);
+ if (unlikely(err))
+ goto out;
+
+ memset(buf, ~patterns[i], io->peb_size);
+ err = ubi_io_read(ubi, buf, pnum, 0, io->peb_size);
+ if (unlikely(err))
+ goto out;
+
+ err = ubi_check_pattern(buf, patterns[i], io->peb_size);
+ if (unlikely(err == 0)) {
+ ubi_err("pattern %x checking failed for PEB %d",
+ patterns[i], pnum);
+ err = -EIO;
+ goto out;
+ }
+ }
+
+ err = patt_count;
+
+out:
+ if (unlikely(err == UBI_IO_BITFLIPS || err == -EBADMSG))
+ /*
+ * If a bit-flip or data integrity error was detected, the test
+ * has not been passed.
+ */
+ err = -EIO;
+ ubi_kfree(buf);
+ return err;
+}
+
+/**
+ * validate_ec_hdr - validate an erase counter header.
+ *
+ * @ubi: the UBI device description object
+ * @ec_hdr: the erase counter header to check
+ *
+ * This function returns zero if the erase counter header is OK, and %1 if
+ * not.
+ */
+static int validate_ec_hdr(const struct ubi_info *ubi,
+ const struct ubi_ec_hdr *ec_hdr)
+{
+ long long ec;
+ int vid_hdr_offset, leb_start;
+ const struct ubi_io_info *io = ubi->io;
+
+ ec = ubi64_to_cpu(ec_hdr->ec);
+ vid_hdr_offset = ubi32_to_cpu(ec_hdr->vid_hdr_offset);
+ leb_start = ubi32_to_cpu(ec_hdr->data_offset);
+
+ if (unlikely(ec_hdr->version != UBI_VERSION)) {
+ ubi_err("node with incompatible UBI version found: "
+ "this UBI version is %d, image version is %d",
+ UBI_VERSION, (int)ec_hdr->version);
+ goto bad;
+ }
+
+ if (unlikely(vid_hdr_offset != io->vid_hdr_offset)) {
+ ubi_err("bad VID header offset %d, expected %d",
+ vid_hdr_offset, io->vid_hdr_offset);
+ goto bad;
+ }
+
+ if (unlikely(leb_start != io->leb_start)) {
+ ubi_err("bad data offset %d, expected %d",
+ leb_start, io->leb_start);
+ goto bad;
+ }
+
+ if (unlikely(ec < 0 || ec > UBI_MAX_ERASECOUNTER)) {
+ ubi_err("bad erase counter %lld", ec);
+ goto bad;
+ }
+
+ return 0;
+
+bad:
+ ubi_err("bad EC header");
+ ubi_dbg_dump_ec_hdr(ec_hdr);
+ ubi_dbg_dump_stack();
+ return 1;
+}
+
+/**
+ * validate_vid_hdr - validate a volume identifier header.
+ *
+ * @ubi: the UBI device description object
+ * @vid_hdr: the volume identifier header to check
+ *
+ * This function checks that data stored in the volume identifier header
+ * @vid_hdr is sane. This function returns zero if the VID header is OK and %1
+ * if not.
+ */
+static int validate_vid_hdr(const struct ubi_info *ubi,
+ const struct ubi_vid_hdr *vid_hdr)
+{
+ const struct ubi_io_info *io = ubi->io;
+ int vol_type = vid_hdr->vol_type;
+ int copy_flag = vid_hdr->copy_flag;
+ int vol_id = ubi32_to_cpu(vid_hdr->vol_id);
+ int lnum = ubi32_to_cpu(vid_hdr->lnum);
+ int compat = vid_hdr->compat;
+ int data_size = ubi32_to_cpu(vid_hdr->data_size);
+ int used_ebs = ubi32_to_cpu(vid_hdr->used_ebs);
+ int data_pad = ubi32_to_cpu(vid_hdr->data_pad);
+ int data_crc = ubi32_to_cpu(vid_hdr->data_crc);
+ int usable_leb_size = io->leb_size - data_pad;
+
+ if (unlikely(copy_flag != 0 && copy_flag != 1)) {
+ dbg_err("bad copy_flag");
+ goto bad;
+ }
+
+ if (unlikely(vol_id < 0 || lnum < 0 || data_size < 0 || used_ebs < 0 ||
+ data_pad < 0)) {
+ dbg_err("negative values");
+ goto bad;
+ }
+
+ if (unlikely(vol_id >= UBI_MAX_VOLUMES &&
+ vol_id < UBI_INTERNAL_VOL_START)) {
+ dbg_err("bad vol_id");
+ goto bad;
+ }
+
+ if (unlikely(vol_id < UBI_INTERNAL_VOL_START && compat != 0)) {
+ dbg_err("bad compat");
+ goto bad;
+ }
+
+ if (unlikely(vol_id >= UBI_INTERNAL_VOL_START &&
+ compat != UBI_COMPAT_DELETE &&
+ compat != UBI_COMPAT_RO &&
+ compat != UBI_COMPAT_PRESERVE &&
+ compat != UBI_COMPAT_REJECT)) {
+ dbg_err("bad compat");
+ goto bad;
+ }
+
+ if (unlikely(vol_type != UBI_VID_DYNAMIC &&
+ vol_type != UBI_VID_STATIC)) {
+ dbg_err("bad vol_type");
+ goto bad;
+ }
+
+ if (unlikely(data_pad >= io->leb_size / 2)) {
+ dbg_err("bad data_pad");
+ goto bad;
+ }
+
+ if (vol_type == UBI_VID_STATIC) {
+ /*
+ * Although from high-level point of view static volumes may
+ * contain zero bytes of data, but no VID headers can contain
+ * zero at these fields, because they empty volumes do not have
+ * mapped logical eraseblocks.
+ */
+ if (unlikely(used_ebs == 0)) {
+ dbg_err("zero used_ebs");
+ goto bad;
+ }
+ if (unlikely(data_size == 0)) {
+ dbg_err("zero data_size");
+ goto bad;
+ }
+ if (lnum < used_ebs - 1) {
+ if (unlikely(data_size != usable_leb_size)) {
+ dbg_err("bad data_size");
+ goto bad;
+ }
+ } else if (lnum == used_ebs - 1) {
+ if (unlikely(data_size == 0)) {
+ dbg_err("bad data_size at last LEB");
+ goto bad;
+ }
+ } else {
+ dbg_err("too high lnum");
+ goto bad;
+ }
+ } else {
+ if (copy_flag == 0) {
+ if (unlikely(data_crc != 0)) {
+ dbg_err("non-zero data CRC");
+ goto bad;
+ }
+ if (unlikely(data_size != 0)) {
+ dbg_err("non-zero data_size");
+ goto bad;
+ }
+ } else {
+ if (unlikely(data_size == 0)) {
+ dbg_err("zero data_size of copy");
+ goto bad;
+ }
+ }
+ if (unlikely(used_ebs != 0)) {
+ dbg_err("bad used_ebs");
+ goto bad;
+ }
+ }
+
+ return 0;
+
+bad:
+ ubi_err("bad VID header");
+ ubi_dbg_dump_vid_hdr(vid_hdr);
+ ubi_dbg_dump_stack();
+ return 1;
+}
+
+#ifdef CONFIG_MTD_UBI_DEBUG_PARANOID_IO
+
+/**
+ * paranoid_check_not_bad - ensure that a physical eraseblock is not bad.
+ *
+ * @ubi: the UBI device description object
+ * @pnum: physical eraseblock number to check
+ *
+ * This function returns zero if the physical eraseblock is good, a positive
+ * number if it is bad and a negative error code if an error occurred.
+ */
+static int paranoid_check_not_bad(const struct ubi_info *ubi, int pnum)
+{
+ int err;
+
+ err = ubi_io_is_bad(ubi, pnum);
+ if (likely(!err))
+ return err;
+
+ ubi_err("paranoid check failed for PEB %d", pnum);
+ ubi_dbg_dump_stack();
+ return err;
+}
+
+/**
+ * paranoid_check_ec_hdr - check if an erase counter header is all right.
+ *
+ * @ubi: the UBI device description object
+ * @pnum: physical eraseblock number the erase counter header belongs to
+ * @ec_hdr: the erase counter header to check
+ *
+ * This function returns zero if the erase counter header contains valid
+ * values, and %1 if not.
+ */
+static int paranoid_check_ec_hdr(const struct ubi_info *ubi, int pnum,
+ const struct ubi_ec_hdr *ec_hdr)
+{
+ int err;
+ uint32_t magic;
+
+ magic = ubi32_to_cpu(ec_hdr->magic);
+ if (unlikely(magic != UBI_EC_HDR_MAGIC)) {
+ ubi_err("bad magic %#08x, must be %#08x",
+ magic, UBI_EC_HDR_MAGIC);
+ goto fail;
+ }
+
+ err = validate_ec_hdr(ubi, ec_hdr);
+ if (unlikely(err)) {
+ ubi_err("paranoid check failed for PEB %d", pnum);
+ goto fail;
+ }
+
+ return 0;
+
+fail:
+ ubi_dbg_dump_ec_hdr(ec_hdr);
+ ubi_dbg_dump_stack();
+ return 1;
+}
+
+/**
+ * paranoid_check_peb_ec_hdr - check that the erase counter header of a
+ * physical eraseblock is in-place and is all right.
+ *
+ * @ubi: the UBI device description object
+ * @pnum: the physical eraseblock number to check
+ *
+ * This function returns zero if the erase counter header is all right, %1 if
+ * not, and a negative error code if an error occurred.
+ */
+static int paranoid_check_peb_ec_hdr(const struct ubi_info *ubi, int pnum)
+{
+ int err;
+ uint32_t crc, hdr_crc;
+ struct ubi_ec_hdr *ec_hdr;
+
+ ec_hdr = ubi_zalloc_ec_hdr(ubi);
+ if (unlikely(!ec_hdr))
+ return -ENOMEM;
+
+ err = ubi_io_read(ubi, ec_hdr, pnum, 0, UBI_EC_HDR_SIZE);
+ if (unlikely(err) && err != UBI_IO_BITFLIPS && err != -EBADMSG)
+ goto exit;
+
+ crc = crc32(UBI_CRC32_INIT, ec_hdr, UBI_EC_HDR_SIZE_CRC);
+ hdr_crc = ubi32_to_cpu(ec_hdr->hdr_crc);
+ if (unlikely(hdr_crc != crc)) {
+ ubi_err("bad CRC, calculated %#08x, read %#08x", crc, hdr_crc);
+ ubi_err("paranoid check failed for PEB %d", pnum);
+ ubi_dbg_dump_ec_hdr(ec_hdr);
+ ubi_dbg_dump_stack();
+ err = 1;
+ goto exit;
+ }
+
+ err = paranoid_check_ec_hdr(ubi, pnum, ec_hdr);
+
+exit:
+ ubi_free_ec_hdr(ubi, ec_hdr);
+ return err;
+}
+
+/**
+ * paranoid_check_vid_hdr - check that a volume identifier header is all right.
+ *
+ * @ubi: the UBI device description object
+ * @pnum: physical eraseblock number the volume identifier header belongs to
+ * @vid_hdr: the volume identifier header to check
+ *
+ * This function returns zero if the volume identifier header is all right, and
+ * %1 if not.
+ */
+static int paranoid_check_vid_hdr(const struct ubi_info *ubi, int pnum,
+ const struct ubi_vid_hdr *vid_hdr)
+{
+ int err;
+ uint32_t magic;
+
+ magic = ubi32_to_cpu(vid_hdr->magic);
+ if (unlikely(magic != UBI_VID_HDR_MAGIC)) {
+ ubi_err("bad VID header magic %#08x at PEB %d, must be %#08x",
+ magic, pnum, UBI_VID_HDR_MAGIC);
+ goto fail;
+ }
+
+ err = validate_vid_hdr(ubi, vid_hdr);
+ if (unlikely(err)) {
+ ubi_err("paranoid check failed for PEB %d", pnum);
+ goto fail;
+ }
+
+ return err;
+
+fail:
+ ubi_err("paranoid check failed for PEB %d", pnum);
+ ubi_dbg_dump_vid_hdr(vid_hdr);
+ ubi_dbg_dump_stack();
+ return 1;
+
+}
+
+/**
+ * paranoid_check_peb_vid_hdr - check that the volume identifier header of a
+ * physical eraseblock is in-place and is all right.
+ *
+ * @ubi: the UBI device description object
+ * @pnum: the physical eraseblock number to check
+ *
+ * This function returns zero if the volume identifier header is all right,
+ * %1 if not, and a negative error code if an error occurred.
+ */
+static int paranoid_check_peb_vid_hdr(const struct ubi_info *ubi, int pnum)
+{
+ int err;
+ uint32_t crc, hdr_crc;
+ struct ubi_vid_hdr *vid_hdr;
+ const struct ubi_io_info *io = ubi->io;
+ void *p;
+
+ vid_hdr = ubi_zalloc_vid_hdr(ubi);
+ if (unlikely(!vid_hdr))
+ return -ENOMEM;
+
+ p = (char *)vid_hdr - io->vid_hdr_shift;
+ err = ubi_io_read(ubi, p, pnum, io->vid_hdr_aloffset,
+ io->vid_hdr_alsize);
+ if (unlikely(err) && err != UBI_IO_BITFLIPS && err != -EBADMSG)
+ goto exit;
+
+ crc = crc32(UBI_CRC32_INIT, vid_hdr, UBI_EC_HDR_SIZE_CRC);
+ hdr_crc = ubi32_to_cpu(vid_hdr->hdr_crc);
+ if (unlikely(hdr_crc != crc)) {
+ ubi_err("bad VID header CRC at PEB %d, calculated %#08x, "
+ "read %#08x", pnum, crc, hdr_crc);
+ ubi_err("paranoid check failed for PEB %d", pnum);
+ ubi_dbg_dump_vid_hdr(vid_hdr);
+ ubi_dbg_dump_stack();
+ err = 1;
+ goto exit;
+ }
+
+ err = paranoid_check_vid_hdr(ubi, pnum, vid_hdr);
+
+exit:
+ ubi_free_vid_hdr(ubi, vid_hdr);
+ return err;
+}
+
+/**
+ * paranoid_check_all_ff - check that a region of flash is empty.
+ *
+ * @ubi: the UBI device description object
+ * @pnum: the physical eraseblock number to check
+ * @offset: the starting offset within the physical eraseblock to check
+ * @len: the length of the region to check
+ *
+ * This function returns zero if only 0xFF bytes are present at offset
+ * @offset of the physical eraseblock @pnum, %1 if not, and a negative error
+ * code if an error occurred.
+ */
+static int paranoid_check_all_ff(const struct ubi_info *ubi, int pnum,
+ int offset, int len)
+{
+ size_t read;
+ int err;
+ void *buf;
+ const struct ubi_io_info *io = ubi->io;
+
+ buf = ubi_kzalloc(len);
+ if (unlikely(!buf))
+ return -ENOMEM;
+
+ err = mtd_read(io, buf, pnum, offset, len, &read);
+ if (unlikely(err && err != -EUCLEAN)) {
+ ubi_err("error %d while reading %d bytes from PEB %d:%d, "
+ "read %zd bytes", err, len, pnum, offset, read);
+ goto error;
+ }
+
+ err = ubi_buf_all_ff(buf, len);
+ if (unlikely(err == 0)) {
+ ubi_err("flash region at PEB %d:%d, length %d does not "
+ "contain all 0xFF bytes", pnum, offset, len);
+ goto fail;
+ }
+
+ ubi_kfree(buf);
+ return 0;
+
+fail:
+ ubi_err("paranoid check failed for PEB %d", pnum);
+ dbg_err("hex dump of the %d-%d region", offset, offset + len);
+ ubi_dbg_hexdump(buf, len);
+ err = 1;
+error:
+ ubi_dbg_dump_stack();
+ ubi_kfree(buf);
+ return err;
+}
+
+#endif /* CONFIG_MTD_UBI_DEBUG_PARANOID_IO */
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
