On Fri, Feb 16, 2007 at 05:48:24PM -0500, Lennart Sorensen wrote:
> Well so far it really looks like enabling OOSTORE on the Geode
> SC1200/GX1 really does make a difference. A bit of searching seems to
> indicate the person that originally submitted the patch that enabled
> load/store reordering on the MediaGX/Geode though it might need OOSTORE,
> but was convinced by others it didn't. Looks like it really does need
> it. The failure that occoured before within a few seconds of starting a
> large transfer, no longer fails and all I did was enable
> CONFIG_X86_OOSTORE, and recompile pcnet32.ko and load the new module on
> the running system. Moving back to the pcnet32.ko built without OOSTORE
> enabled hits the failure again within seconds, until ifconfig eth1
> down/up reinitialized it's descriptor ring, after which it survices
> another bit of transfer and then fails again.
Well forcing load/store serialize on the CPU doesn't help, disalbing
memory bypass doesn't help. Enabling the X86_OOSTORE does help. What a
stupid CPU design.
So far nothing has managed to fix the __memcpy_toio in the jsm driver
getting data out of order when sending on an exar pci uart chip. Only
calling memcpy with one byte at a time seems to work there. Works fine
on every other cpu of course. What else am I going to discover is wrong
with this CPU.
--
Len Sorensen
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]