Re: AHCI - remove probing of ata2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello, Paul.

Paul Rolland wrote:
Also, please note that libata is complaining :
ATA: abnormal status 0x7F on port 0x177
and later :
ATA: abnormal status 0x7F on port 0x9807

You can ignore the above. The errors on ata2 are due to SIMG storage processor and will probably fixed when PMP support is implemented. The latter errors on pata_jmicron is probably due to lack of proper mode programming on that driver. I'll look into that.

Thanks.

--
tejun
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux