Re: [BUG] PATA_PCMCIA does not work

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2/11/07, Alan <[email protected]> wrote:
> [pata_pcmcia dmesg]
> ata1.00: CFA, max PIO0, 20480 sectors: LBA
> ata1.00: ata1: dev 0 multi count 0
> ata1.01: CFA, max PIO0, 20480 sectors: LBA
> ata1.01: ata1: dev 1 multi count 0

Do you have two cards here ?

I've seen this as well, on an ancient 4MB card. I'm pretty sure the
-CSEL signal on my test board is incorrectly routed, so I thought it
was because of that. I'll try to strap it tomorrow and see if it
really is the cause of the problem.

Your card should work with the current -mm driver although not entirely
for the right reasons. Given you have such a marvellously buggy set of
hardware can I send you some test patches to try ?

In my current pile of four CF cards, it looks like three of them are
buggy, although in slightly different ways. I'd be happy to test a few
patches.

Haavard
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux