Re: 2.6.18.2: sporadic SATA port resets (Broadcom BCM5785 (HT1000))

[koan <koan00@gmail.com>]

I believe you need to add the flag '-d ata' to the smartctl command in
order to see the smart status of a SATA device.

-Jesse

-------------------------------------------------------------
here it is:

-->

# smartctl -a /dev/sda
smartctl version 5.36 [x86_64-unknown-linux-gnu] Copyright (C) 2002-6 Bruce
Allen
Home page is http://smartmontools.sourceforge.net/

Device: ATA      WDC WD1500ADFD-0 Version: 20.0
Serial number:      WD-WMAP41246348
Device type: disk
Local Time is: Fri Feb  9 18:06:23 2007 CET
Device does not support SMART

Error Counter logging not supported

[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
Device does not support Self Test logging

<--

cu,
Emmy
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/