Re: [QUESTION] ATA: abnormal status 0x80 on port 0xCC07

[Jeff Garzik <jeff@garzik.org>]

Michal Piotrowski wrote:
> Hi Jeff,
>
> What does this mean?
>
> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
> ata1.00: cmd c8/00:08:67:40:68/00:00:00:00:00/e3 tag 0 cdb 0x0 data 4096 in
>         res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
> ata1: soft resetting port
> ata1.00: configured for UDMA/133
> ata1: EH complete
> SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
> sda: Write Protect is off
> sda: Mode Sense: 00 3a 00 00
> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
> ata1.00: cmd c8/00:00:c3:52:43/00:00:00:00:00/ea tag 0 cdb 0x0 data 
> 131072 in
>         res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
> ata1: soft resetting port
> ata1.00: configured for UDMA/133
> ata1: EH complete
> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
> ata1.00: cmd c8/00:00:c3:52:43/00:00:00:00:00/ea tag 0 cdb 0x0 data 
> 131072 in
>         res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
> ata1: soft resetting port
> ata1.00: configured for UDMA/133
> ata1: EH complete
> SCSI device sda: write cache: enabled, read cache: enabled, doesn't 
> support DPO
> or FUA
> SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
> sda: Write Protect is off
> sda: Mode Sense: 00 3a 00 00
> SCSI device sda: write cache: enabled, read cache: enabled, doesn't 

timeouts usually mean that an interrupt was not delivered, when the 
driver was expecting one.

All the usual suspects apply: this could be a system hardware problem 
(check cables and PSU), heat problem, BIOS or ACPI problem, hard drive 
failure, or ATA driver problem.

	Jeff



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/