Re: Writing performance problem with SAS1068

[Douglas Gilbert <dougg@torque.net>]

Bernardo Innocenti wrote:
> Hello,
> 
> I've stumbled onto a strange performance problem on a new server:
> reading from disks is fast (70-80MB/s), but writing is extremely
> slow (13-15MB/s).  I've measured it like this:
> 
> dd if=/dev/zero of=/dev/sdd bs=4096 count=65536 conv=fdatasync
> 65536+0 records in
> 65536+0 records out
> 268435456 bytes (268 MB) copied, 17.7004 seconds, 15.2 MB/s

# dd if=/dev/zero of=/dev/sdj bs=4096 count=65536 conv=fdatasync
65536+0 records in
65536+0 records out
268435456 bytes (268 MB) copied, 2.24953 seconds, 119 MB/s

# dd if=/dev/zero of=/dev/sdd bs=4096 count=65536 conv=fdatasync
65536+0 records in
65536+0 records out
268435456 bytes (268 MB) copied, 2.3246 seconds, 115 MB/s

Both /dev/sdj and /dev/sdd connect via an expander to the same
SAS disk. /dev/sdj is via the LT aic94xx driver and a PCI-X HBA.
/dev/sdd is via the mptsas driver and a SAS1068 (PCIe) based HBA.
The kernel version is 2.6.20-rc5.

Looks good to me.

You may like to check that Write Cache Enable is on with:
'sdparm --get=WCE /dev/sdd'.

Doug Gilbert

> *but*: if I rebuild the kernel and change CONFIG_FUSION_MAX_SGE
> from 40 (Fedora's default) to 128 (maximum value), it suddenly
> gets much faster: 31MB/s!
> 
> Looks very much like an interrupt problem to me.  Maybe
> increasing the scatter gather mitigates the problem of
> missing completion notifications.
> 
> Evidence:
> 
> Exhibit A: custom kernel config for 2.6.18-1.2257.fc5.bernie
> http://www.codewiz.org/helium_logs/config
> 
> Exhibit B: dmesg output from said kernel
> http://www.codewiz.org/helium_logs/dmesg
> 
> Exhibit C: misc proc files, and all that
> http://www.codewiz.org/helium_logs/
> 
> Exhibit D: motherboard and chipset specification
> http://www.supermicro.com/products/motherboard/Xeon3000/3010/PDSME+.cfm
> 
> 
> Circumstantial evidence:
> 
> - Seems to affect just the LSI SAS1068 PCI-X controller.
>   The on-board AHCI controller writes very fast (>60MB/s)
> 
> - I've seen a very similar writing bottleneck with a
>   Promise TX4 SATA controller (not PCI-X) on a server with
>   a similar motherboard (Supermicro with Mukilteo 3000).
> 
> - Passing mpt_msi_enable=1 doesn't change anything
> 
> - FreeBSD 6.2 is even slower: writes at 7MB/s
> 
> - OpenSolaris is much, much slower... less than 1MB/s.
> 
> - Windows Vista (rc something) writes at 90MB/s.  Too
>   fast to believe, maybe dd from Cygwin is misbehaving.
> 

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/