On Wednesday 31 January 2007 15:25, Bob Picco wrote:
> Hi Len,
>
> On 2.6.20-rc6-mm2 my rx2600 wouldn't boot unless I reverted all changes
> to drivers/acpi/tables.c.
2.6.20-rc6-mm2 git-acpi.patch contained only the acpi_table_parse()
fix for bugzilla-7465. The version of the patch that made -mm2 had a flaw
where if the HPET were not connfigured, it would BUG_ON() due to a NULL
handler it didn't expect -- and this generally happened before VGA was enabled.
That bug got fixed, and also bugzilla-7465 is not in -mm3 -- which explains
why it went away.
> Nearly all major early boot detected ACPI tables
> weren't discovered.
That part I can't explain.
> I never had time to resolve because 2.6.20-rc6-mm3
> showed up. The -mm2 problem appears corrected but the machine now crashes in
> acpi_init for -mm3. 2.6.20-rc6 and 2.6.20-rc6-mm3 boot logs are included
> at end of email.
>
> For 2.6.20-rc6-mm3 the HP internal simualtor for a NUMA machine is
> getting a preposterous pxm value and subsequently MCAs in pxm_to_node
> because of large pxm. It seems like table parsing is being done
> incorrectly.
>
> Nope this is the issue:
>
> Index: linux-2.6.20-rc6-mm3/include/acpi/actbl1.h
> ===================================================================
> --- linux-2.6.20-rc6-mm3.orig/include/acpi/actbl1.h 2007-01-30 09:27:44.000000000 -0500
> +++ linux-2.6.20-rc6-mm3/include/acpi/actbl1.h 2007-01-31 14:41:32.000000000 -0500
> @@ -654,8 +654,8 @@ struct acpi_srat_cpu_affinity {
>
> struct acpi_srat_mem_affinity {
> struct acpi_subtable_header header;
> - u32 proximity_domain;
> - u16 reserved; /* Reserved, must be zero */
> + u8 proximity_domain;
> + u8 reserved[5]; /* Reserved, must be zero */
> u64 base_address;
> u64 length;
> u32 memory_type; /* See acpi_address_range_id */
> Index: linux-2.6.20-rc6-mm3/arch/ia64/kernel/acpi.c
> ===================================================================
> --- linux-2.6.20-rc6-mm3.orig/arch/ia64/kernel/acpi.c 2007-01-30 13:55:08.000000000 -0500
> +++ linux-2.6.20-rc6-mm3/arch/ia64/kernel/acpi.c 2007-01-31 14:49:26.000000000 -0500
> @@ -423,7 +423,7 @@ int get_memory_proximity_domain(struct a
>
> pxm = ma->proximity_domain;
> if (ia64_platform_is("sn2"))
> - pxm += ma->reserved << 8;
> + pxm += ma->reserved[0] << 8;
>
> return pxm;
> }
>
> I doubt you'll want to apply this patch. It appears HP firmware has some
> of the reserved field not initialized to zero. This results in the huge
> pxm. Was the pxm size expanded with a recent ACPI spec revision?
Yep.
The original code was programmed to the Microsoft SRAT spec -- which
identifies itself as version 1. The new code is talking to ACPI 3.0 SRAT spec
which identifies itself as version 2.
In the SRAT memory affinity structure, the difference is that the proximity_domain
is now 4-bytes instead of 1.
We need to be checking for the SRAT revision and handling both revisions.
Might be safer to build w/o NUMA until we get the SRAT fixed.
> Well with this patch I can pursue the acpi_init panic on simulator.
>
> rx2600 (2 CPU MP) and NUMA simulator (1 node and 4 cpus) boot successfully
> on 2.6.20-rc6.
>
> bob
>
>
> Linux version 2.6.20-rc6 (root@localhost) (gcc version 3.4.1) #1 SMP Mon Jan 29 14:40:17 EST 2007
> EFI v1.10 by HP: SALsystab=0x3fb38000 ACPI 2.0=0x3fb2e000 SMBIOS=0x3fb3a000 HCDP=0x3fb2c000
> PCDP: v0 at 0x3fb2c000
> Early serial console at MMIO 0xf8030000 (options '9600n8')
> ACPI: RSDP (v002 HP ) @ 0x000000003fb2e000
> ACPI: XSDT (v001 HP rx2600 0x00000000 HP 0x00000000) @ 0x000000003fb2e02c
> ACPI: FADT (v003 HP rx2600 0x00000000 HP 0x00000000) @ 0x000000003fb369e0
> ACPI: SPCR (v001 HP rx2600 0x00000000 HP 0x00000000) @ 0x000000003fb36b18
> ACPI: DBGP (v001 HP rx2600 0x00000000 HP 0x00000000) @ 0x000000003fb36b68
> ACPI: MADT (v001 HP rx2600 0x00000000 HP 0x00000000) @ 0x000000003fb36c28
> ACPI: SPMI (v004 HP rx2600 0x00000000 HP 0x00000000) @ 0x000000003fb36ba0
> ACPI: CPEP (v001 HP rx2600 0x00000000 HP 0x00000000) @ 0x000000003fb36bf0
> ACPI: SSDT (v001 HP rx2600 0x00000006 INTL 0x02012044) @ 0x000000003fb33870
> ACPI: SSDT (v001 HP rx2600 0x00000006 INTL 0x02012044) @ 0x000000003fb33a50
> ACPI: SSDT (v001 HP rx2600 0x00000006 INTL 0x02012044) @ 0x000000003fb33da0
> ACPI: SSDT (v001 HP rx2600 0x00000006 INTL 0x02012044) @ 0x000000003fb347c0
> ACPI: SSDT (v001 HP rx2600 0x00000006 INTL 0x02012044) @ 0x000000003fb351e0
> ACPI: SSDT (v001 HP rx2600 0x00000006 INTL 0x02012044) @ 0x000000003fb35c00
> ACPI: SSDT (v001 HP rx2600 0x00000006 INTL 0x02012044) @ 0x000000003fb36620
> ACPI: SSDT (v001 HP rx2600 0x00000006 INTL 0x02012044) @ 0x000000003fb36800
> ACPI: SSDT (v001 HP rx2600 0x00000006 INTL 0x02012044) @ 0x000000003fb368f0
> ACPI: DSDT (v001 HP rx2600 0x00000007 INTL 0x02012044) @ 0x0000000000000000
> SAL 3.1: HP version 2.21
> SAL Platform features: None
> SAL: AP wakeup using external interrupt vector 0xff
> No logical to physical processor mapping available
> ACPI: Local APIC address c0000000fee00000
> GSI 36 (level, low) -> CPU 0 (0x0000) vector 48
> 2 CPUs available, 2 CPUs total
> MCA related initialization done
> Entering add_active_range(0, 1025, 4096) 0 entries of 12800 used
> Entering add_active_range(0, 4825, 64889) 1 entries of 12800 used
> Entering add_active_range(0, 65216, 65227) 2 entries of 12800 used
> Entering add_active_range(0, 16842752, 17038305) 3 entries of 12800 used
> Entering add_active_range(0, 17038307, 17038312) 4 entries of 12800 used
> Entering add_active_range(0, 17038313, 17039193) 5 entries of 12800 used
> Entering add_active_range(0, 17039209, 17039236) 6 entries of 12800 used
> Entering add_active_range(0, 17039264, 17039343) 7 entries of 12800 used
> Zone PFN ranges:
> DMA 1025 -> 262144
> Normal 262144 -> 17039360
> early_node_map[8] active PFN ranges
> 0: 1025 -> 4096
> 0: 4825 -> 64889
> 0: 65216 -> 65227
> 0: 16842752 -> 17038305
> 0: 17038307 -> 17038312
> 0: 17038313 -> 17039193
> 0: 17039209 -> 17039236
> 0: 17039264 -> 17039343
> On node 0 totalpages: 259690
> DMA zone: 892 pages used for memmap
> DMA zone: 0 pages reserved
> DMA zone: 62254 pages, LIFO batch:7
> Normal zone: 57343 pages used for memmap
> Normal zone: 139201 pages, LIFO batch:7
> Built 1 zonelists. Total pages: 201455
> Kernel command line: BOOT_IMAGE=scsi0:/EFI/debian/boot/vmlinux-2.6.20-rc6 root=/dev/sda3 installtype=DebianInstall raid=noautodetect console=hcdp devfs=nomount nohalt kgdb8250=mmio,0x0000000ff5e2000,115200,51 debug loglevel=9 ro
> PID hash table entries: 4096 (order: 12, 32768 bytes)
> CPU 0: base freq=200.000MHz, ITC ratio=10/2, ITC freq=1000.000MHz+/-500ppm
> Console: colour VGA+ 80x25
> Memory: 4137744k/4155040k available (8022k code, 29008k reserved, 3225k data, 720k init)
> Leaving McKinley Errata 9 workaround enabled
> Calibrating delay loop... 1499.13 BogoMIPS (lpj=2998272)
> Dentry cache hash table entries: 524288 (order: 8, 4194304 bytes)
> Inode-cache hash table entries: 262144 (order: 7, 2097152 bytes)
> Mount-cache hash table entries: 1024
> ACPI: Core revision 20060707
> Boot processor id 0x0/0x0
> CPU 1: synchronized ITC with CPU 0 (last diff -4 cycles, maxerr 454 cycles)
> CPU 1: base freq=200.000MHz, ITC ratio=10/2, ITC freq=1000.000MHz+/-500ppm
> Calibrating delay loop... 1499.13 BogoMIPS (lpj=2998272)
> Brought up 2 CPUs
> Total of 2 processors activated (2998.27 BogoMIPS).
> migration_cost=3270
> DMI 2.3 present.
> NET: Registered protocol family 16
> ACPI: bus type pci registered
> ACPI: Interpreter enabled
> ACPI: Using IOSAPIC for interrupt routing
> ACPI: PCI Root Bridge [PCI0] (0000:00)
> PCI: Firmware left 0000:00:03.0 e100 interrupts enabled, disabling
> ACPI: PCI Interrupt Routing Table [\_SB_.SBA0.PCI0._PRT]
> ACPI: PCI Root Bridge [PCI1] (0000:20)
> ACPI: PCI Interrupt Routing Table [\_SB_.SBA0.PCI1._PRT]
> ACPI: PCI Root Bridge [PCI2] (0000:40)
> ACPI: PCI Interrupt Routing Table [\_SB_.SBA0.PCI2._PRT]
> ACPI: PCI Root Bridge [PCI3] (0000:60)
> ACPI: PCI Interrupt Routing Table [\_SB_.SBA0.PCI3._PRT]
> ACPI: PCI Root Bridge [PCI4] (0000:80)
> ACPI: PCI Interrupt Routing Table [\_SB_.SBA0.PCI4._PRT]
> ACPI: PCI Root Bridge [PCI6] (0000:c0)
> ACPI: PCI Interrupt Routing Table [\_SB_.SBA0.PCI6._PRT]
> ACPI: PCI Root Bridge [PCI7] (0000:e0)
> Boot video device is 0000:e0:02.0
> ACPI: PCI Interrupt Routing Table [\_SB_.SBA0.PCI7._PRT]
> Linux Plug and Play Support v0.97 (c) Adam Belay
> pnp: PnP ACPI init
> GSI 34 (edge, high) -> CPU 1 (0x0100) vector 49
> GSI 35 (edge, high) -> CPU 0 (0x0000) vector 50
> pnp: PnP ACPI: found 11 devices
> SCSI subsystem initialized
> usbcore: registered new interface driver usbfs
> usbcore: registered new interface driver hub
> usbcore: registered new device driver usb
> IOC: zx1 2.3 HPA 0xfed01000 IOVA space 1024Mb at 0x40000000
> NET: Registered protocol family 2
> IP route cache hash table entries: 131072 (order: 6, 1048576 bytes)
> TCP established hash table entries: 524288 (order: 9, 8388608 bytes)
> TCP bind hash table entries: 65536 (order: 6, 1048576 bytes)
> TCP: Hash tables configured (established 524288 bind 65536)
> TCP reno registered
> perfmon: version 2.0 IRQ 238
> perfmon: Itanium 2 PMU detected, 16 PMCs, 18 PMDs, 4 counters (47 bits)
> PAL Information Facility v0.5
> perfmon: added sampling format default_format
> perfmon_default_smpl: default_format v2.0 registered
> Installing knfsd (copyright (C) 1996 [email protected]).
> io scheduler noop registered
> io scheduler anticipatory registered (default)
> io scheduler deadline registered
> io scheduler cfq registered
> GSI 83 (level, low) -> CPU 1 (0x0100) vector 51
> ACPI: PCI Interrupt 0000:e0:02.0[A] -> GSI 83 (level, low) -> IRQ 51
> radeonfb: Found Intel x86 BIOS ROM Image
> radeonfb: Retrieved PLL infos from BIOS
> radeonfb: Reference=27.00 MHz (RefDiv=60) Memory=166.00 Mhz, System=166.00 MHz
> radeonfb: PLL min 12000 max 35000
> i2c_adapter i2c-1: unable to read EDID block.
> i2c_adapter i2c-1: unable to read EDID block.
> i2c_adapter i2c-1: unable to read EDID block.
> i2c_adapter i2c-3: unable to read EDID block.
> i2c_adapter i2c-3: unable to read EDID block.
> i2c_adapter i2c-3: unable to read EDID block.
> i2c_adapter i2c-2: unable to read EDID block.
> i2c_adapter i2c-2: unable to read EDID block.
> i2c_adapter i2c-2: unable to read EDID block.
> i2c_adapter i2c-3: unable to read EDID block.
> i2c_adapter i2c-3: unable to read EDID block.
> i2c_adapter i2c-3: unable to read EDID block.
> radeonfb: Monitor 1 type CRT found
> radeonfb: Monitor 2 type no found
> Console: switching to colour frame buffer device 80x30
> radeonfb (0000:e0:02.0): ATI Radeon QY
> input: Power Button (FF) as /class/input/input0
> ACPI: Power Button (FF) [PWRF]
> input: Sleep Button (FF) as /class/input/input1
> ACPI: Sleep Button (FF) [SLPF]
> ACPI: Thermal Zone [THM0] (27 C)
> EFI Time Services Driver v0.4
> Linux agpgart interface v0.101 (c) Dave Jones
> [drm] Initialized drm 1.1.0 20060810
> [drm] Initialized radeon 1.25.0 20060524 on minor 0
> Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
> 00:04: ttyS0 at MMIO 0xff5e0000 (irq = 49) is a 16550A
> 00:05: ttyS1 at MMIO 0xff5e2000 (irq = 50) is a 16550A
> GSI 82 (level, low) -> CPU 0 (0x0000) vector 52
> ACPI: PCI Interrupt 0000:e0:01.0[A] -> GSI 82 (level, low) -> IRQ 52
> 0000:e0:01.0: ttyS2 at MMIO 0xf8031000 (irq = 52) is a 16550A
> ACPI: PCI Interrupt 0000:e0:01.1[A] -> GSI 82 (level, low) -> IRQ 52
> 0000:e0:01.1: ttyS3 at MMIO 0xf8030000 (irq = 52) is a 16550A
> Couldn't register serial port 0000:e0:01.1: -28
> RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
> loop: loaded (max 8 devices)
> Intel(R) PRO/1000 Network Driver - version 7.3.15-k2
> Copyright (c) 1999-2006 Intel Corporation.
> Ethernet Channel Bonding Driver: v3.1.1 (September 26, 2006)
> bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details.
> eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
> eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <[email protected]> and others
> GSI 20 (level, low) -> CPU 1 (0x0100) vector 53
> ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 53
> eth0: OEM i82557/i82558 10/100 Ethernet, 00:30:6E:4A:53:34, IRQ 53.
> Board assembly 000000-000, Physical connectors present: RJ45
> Primary interface chip i82555 PHY #1.
> Secondary interface chip i82555.
> General self-test: passed.
> Serial sub-system self-test: passed.
> Internal registers self-test: passed.
> ROM checksum self-test: passed (0xb874c1d3).
> tg3.c:v3.72 (January 8, 2007)
> GSI 29 (level, low) -> CPU 0 (0x0000) vector 54
> ACPI: PCI Interrupt 0000:20:02.0[A] -> GSI 29 (level, low) -> IRQ 54
> eth1: Tigon3 [partno(BCM95700A6) rev 0105 PHY(5701)] (PCI:66MHz:64-bit) 10/100/1000Base-T Ethernet 00:30:6e:4a:52:9a
> eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[0]
> eth1: dma_rwctrl[76ff2d0f] dma_mask[64-bit]
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> CMD649: IDE controller at PCI slot 0000:00:02.0
> GSI 21 (level, low) -> CPU 1 (0x0100) vector 55
> ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 21 (level, low) -> IRQ 55
> CMD649: chipset revision 2
> CMD649: 100% native mode on irq 55
> ide0: BM-DMA at 0x0d40-0x0d47, BIOS settings: hda:pio, hdb:pio
> ide1: BM-DMA at 0x0d48-0x0d4f, BIOS settings: hdc:pio, hdd:pio
> Probing IDE interface ide0...
> hda: DW-224E, ATAPI CD/DVD-ROM drive
> ide0 at 0xd58-0xd5f,0xd66 on irq 55
> Probing IDE interface ide1...
> hda: ATAPI 24X DVD-ROM CD-R/RW drive, 1658kB Cache, UDMA(33)
> Uniform CD-ROM driver Revision: 3.20
> ide-floppy driver 0.99.newide
> st: Version 20061107, fixed bufsize 32768, s/g segs 256
> osst :I: Tape driver with OnStream support version 0.99.4
> osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
> Fusion MPT base driver 3.04.03
> Copyright (c) 1999-2007 LSI Logic Corporation
> Fusion MPT SPI Host driver 3.04.03
> GSI 27 (level, low) -> CPU 0 (0x0000) vector 56
> ACPI: PCI Interrupt 0000:20:01.0[A] -> GSI 27 (level, low) -> IRQ 56
> mptbase: Initiating ioc0 bringup
> ioc0: 53C1030: Capabilities={Initiator}
> scsi0 : ioc0: LSI53C1030, FwRev=01030600h, Ports=1, MaxQ=255, IRQ=56
> scsi 0:0:0:0: Direct-Access HP 36.4G ST336753LC HPC3 PQ: 0 ANSI: 3
> target0:0:0: Beginning Domain Validation
> target0:0:0: Ending Domain Validation
> target0:0:0: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI WRFLOW PCOMP (6.25 ns, offset 63)
> SCSI device sda: 71132960 512-byte hdwr sectors (36420 MB)
> sda: Write Protect is off
> sda: Mode Sense: d3 00 10 08
> SCSI device sda: write cache: disabled, read cache: enabled, supports DPO and FUA
> SCSI device sda: 71132960 512-byte hdwr sectors (36420 MB)
> sda: Write Protect is off
> sda: Mode Sense: d3 00 10 08
> SCSI device sda: write cache: disabled, read cache: enabled, supports DPO and FUA
> sda: sda1 sda2 sda3
> sd 0:0:0:0: Attached scsi disk sda
> sd 0:0:0:0: Attached scsi generic sg0 type 0
> scsi 0:0:1:0: Direct-Access HP 36.4G ST336753LC HPC3 PQ: 0 ANSI: 3
> target0:0:1: Beginning Domain Validation
> target0:0:1: Ending Domain Validation
> target0:0:1: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI WRFLOW PCOMP (6.25 ns, offset 63)
> SCSI device sdb: 71132960 512-byte hdwr sectors (36420 MB)
> sdb: Write Protect is off
> sdb: Mode Sense: d3 00 10 08
> SCSI device sdb: write cache: disabled, read cache: enabled, supports DPO and FUA
> SCSI device sdb: 71132960 512-byte hdwr sectors (36420 MB)
> sdb: Write Protect is off
> sdb: Mode Sense: d3 00 10 08
> SCSI device sdb: write cache: disabled, read cache: enabled, supports DPO and FUA
> sdb: sdb1 sdb2 sdb3
> sd 0:0:1:0: Attached scsi disk sdb
> sd 0:0:1:0: Attached scsi generic sg1 type 0
> GSI 28 (level, low) -> CPU 1 (0x0100) vector 57
> ACPI: PCI Interrupt 0000:20:01.1[B] -> GSI 28 (level, low) -> IRQ 57
> mptbase: Initiating ioc1 bringup
> ioc1: 53C1030: Capabilities={Initiator}
> scsi1 : ioc1: LSI53C1030, FwRev=01030600h, Ports=1, MaxQ=255, IRQ=57
> GSI 18 (level, low) -> CPU 0 (0x0000) vector 58
> ACPI: PCI Interrupt 0000:00:01.2[C] -> GSI 18 (level, low) -> IRQ 58
> ehci_hcd 0000:00:01.2: EHCI Host Controller
> ehci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
> ehci_hcd 0000:00:01.2: irq 58, io mem 0x80021000
> ehci_hcd 0000:00:01.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004
> usb usb1: configuration #1 chosen from 1 choice
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 5 ports detected
> ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
> GSI 16 (level, low) -> CPU 1 (0x0100) vector 59
> ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 59
> ohci_hcd 0000:00:01.0: OHCI Host Controller
> ohci_hcd 0000:00:01.0: new USB bus registered, assigned bus number 2
> ohci_hcd 0000:00:01.0: irq 59, io mem 0x80023000
> usb usb2: configuration #1 chosen from 1 choice
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 3 ports detected
> GSI 17 (level, low) -> CPU 0 (0x0000) vector 60
> ACPI: PCI Interrupt 0000:00:01.1[B] -> GSI 17 (level, low) -> IRQ 60
> ohci_hcd 0000:00:01.1: OHCI Host Controller
> ohci_hcd 0000:00:01.1: new USB bus registered, assigned bus number 3
> ohci_hcd 0000:00:01.1: irq 60, io mem 0x80022000
> usb usb3: configuration #1 chosen from 1 choice
> hub 3-0:1.0: USB hub found
> hub 3-0:1.0: 2 ports detected
> USB Universal Host Controller Interface driver v3.0
> usbcore: registered new interface driver hiddev
> usbcore: registered new interface driver usbhid
> drivers/usb/input/hid-core.c: v2.6:USB HID core driver
> mice: PS/2 mouse device common for all mice
> md: linear personality registered for level -1
> md: raid0 personality registered for level 0
> md: raid1 personality registered for level 1
> md: multipath personality registered for level -4
> device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: [email protected]
> EFI Variables Facility v0.08 2004-May-17
> TCP cubic registered
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> Adding console on ttyS3 at MMIO 0xf8030000 (options '9600n8')
> md: Skipping autodetection of RAID arrays. (raid=noautodetect)
> kjournald starting. Commit interval 5 seconds
> EXT3-fs: mounted filesystem with ordered data mode.
> VFS: Mounted root (ext3 filesystem) readonly.
> Freeing unused kernel memory: 720kB freed
> EXT3 FS on sda3, internal journal
> Adding 971744k swap on /dev/sda2. Priority:-1 extents:1 across:971744k
>
>
> Linux version 2.6.20-rc6-mm3 (root@localhost) (gcc version 3.4.1) #2 SMP Tue Jan 30 09:51:25 EST 2007
> EFI v1.10 by HP: SALsystab=0x3fb38000 ACPI 2.0=0x3fb2e000 SMBIOS=0x3fb3a000 HCDP=0x3fb2c000
> PCDP: v0 at 0x3fb2c000
> Early serial console at MMIO 0xf8030000 (options '9600n8')
> ACPI: RSDP @ 0x000000003fb2e000/0x0028 (v002 HP)
> ACPI: XSDT @ 0x000000003fb2e02c/0x009C (v001 HP rx2600 0x00000000 HP 0x00000000)
> ACPI: FACP @ 0x000000003fb369e0/0x00F4 (v003 HP rx2600 0x00000000 HP 0x00000000)
> ACPI: DSDT @ 0x000000003fb2e0e0/0x5781 (v001 HP rx2600 0x00000007 INTL 0x02012044)
> ACPI: FACS @ 0x000000003fb36ad8/0x0040
> ACPI: SPCR @ 0x000000003fb36b18/0x0050 (v001 HP rx2600 0x00000000 HP 0x00000000)
> ACPI: DBGP @ 0x000000003fb36b68/0x0034 (v001 HP rx2600 0x00000000 HP 0x00000000)
> ACPI: APIC @ 0x000000003fb36c28/0x00C0 (v001 HP rx2600 0x00000000 HP 0x00000000)
> ACPI: SPMI @ 0x000000003fb36ba0/0x0050 (v004 HP rx2600 0x00000000 HP 0x00000000)
> ACPI: CPEP @ 0x000000003fb36bf0/0x0034 (v001 HP rx2600 0x00000000 HP 0x00000000)
> ACPI: SSDT @ 0x000000003fb33870/0x01D6 (v001 HP rx2600 0x00000006 INTL 0x02012044)
> ACPI: SSDT @ 0x000000003fb33a50/0x0342 (v001 HP rx2600 0x00000006 INTL 0x02012044)
> ACPI: SSDT @ 0x000000003fb33da0/0x0A16 (v001 HP rx2600 0x00000006 INTL 0x02012044)
> ACPI: SSDT @ 0x000000003fb347c0/0x0A16 (v001 HP rx2600 0x00000006 INTL 0x02012044)
> ACPI: SSDT @ 0x000000003fb351e0/0x0A16 (v001 HP rx2600 0x00000006 INTL 0x02012044)
> ACPI: SSDT @ 0x000000003fb35c00/0x0A16 (v001 HP rx2600 0x00000006 INTL 0x02012044)
> ACPI: SSDT @ 0x000000003fb36620/0x01D8 (v001 HP rx2600 0x00000006 INTL 0x02012044)
> ACPI: SSDT @ 0x000000003fb36800/0x00EB (v001 HP rx2600 0x00000006 INTL 0x02012044)
> ACPI: SSDT @ 0x000000003fb368f0/0x00EF (v001 HP rx2600 0x00000006 INTL 0x02012044)
> SAL 3.1: HP version 2.21
> SAL Platform features: None
> SAL: AP wakeup using external interrupt vector 0xff
> No logical to physical processor mapping available
> ACPI: Local APIC address c0000000fee00000
> GSI 36 (level, low) -> CPU 0 (0x0000) vector 48
> 2 CPUs available, 2 CPUs total
> MCA related initialization done
> Zone PFN ranges:
> DMA 1024 -> 262144
> Normal 262144 -> 17039360
> early_node_map[5] active PFN ranges
> 0: 1024 -> 64889
> 0: 65216 -> 65227
> 0: 16842752 -> 17039193
> 0: 17039209 -> 17039236
> 0: 17039264 -> 17039343
> Built 1 zonelists. Total pages: 202188
> Kernel command line: BOOT_IMAGE=scsi0:/EFI/debian/boot/vmlinux-2.6.20-rc6-mm3 root=/dev/sda3 installtype=DebianInstall raid=noautodetect console=hcdp devfs=nomount nohalt kgdb8250=mmio,0x0000000ff5e2000,115200,51 debug loglevel=9 ro
> PID hash table entries: 4096 (order: 12, 32768 bytes)
> CPU 0: base freq=200.000MHz, ITC ratio=10/2, ITC freq=1000.000MHz+/-500ppm
> Console: colour VGA+ 80x25
> Memory: 4137488k/4154784k available (8153k code, 29280k reserved, 3330k data, 736k init)
> Leaving McKinley Errata 9 workaround enabled
> Calibrating delay loop... 1499.13 BogoMIPS (lpj=2998272)
> Dentry cache hash table entries: 524288 (order: 8, 4194304 bytes)
> Inode-cache hash table entries: 262144 (order: 7, 2097152 bytes)
> Mount-cache hash table entries: 1024
> ACPI: Core revision 20070126
> Boot processor id 0x0/0x0
> CPU 1: synchronized ITC with CPU 0 (last diff -19 cycles, maxerr 464 cycles)
> CPU 1: base freq=200.000MHz, ITC ratio=10/2, ITC freq=1000.000MHz+/-500ppm
> Calibrating delay loop... 1499.13 BogoMIPS (lpj=2998272)
> Brought up 2 CPUs
> Total of 2 processors activated (2998.27 BogoMIPS).
> migration_cost=3267
> DMI 2.3 present.
> NET: Registered protocol family 16
> ACPI: bus type pci registered
> Unable to handle kernel paging request at virtual address 00000000005c100a
> swapper[1]: Oops 8813272891392 [1]
>
> Pid: 1, CPU 0, comm: swapper
> psr : 00001010085a2010 ifs : 8000000000000309 ip : [<a0000001003b2980>] Not tainted
> ip is at acpi_os_read_port+0x1a0/0x2e0
> unat: 0000000000000000 pfs : 000000000000030a rsc : 0000000000000003
> rnat: 0000000000000000 bsps: 0000000000000000 pr : 0000000000011961
> ldrs: 0000000000000000 ccv : 0000000000000000 fpsr: 0009804c8a74433f
> csd : 0000000000000000 ssd : 0000000000000000
> b0 : a0000001003d5090 b6 : a0000001003d5250 b7 : a00000010000a880
> f6 : 1003e0000000000000000 f7 : 1003e20c49ba5e353f7cf
> f8 : 1003e0000000000000000 f9 : 1003e0000000000000338
> f10 : 1003e0000000000000c48 f11 : 1003e431bde82d7b634db
> r1 : a000000100d18ac0 r2 : e0000040fedbfdb7 r3 : e0000040fedbfdb6
> r8 : e0000040fedbfdb5 r9 : e0000040fedbfdb4 r10 : e0000040fedbfdb3
> r11 : e0000040fedbfdb2 r12 : e0000040fedbfd90 r13 : e0000040fedb8000
> r14 : e0000040fedbfda0 r15 : 00000000005c100a r16 : 0000000000000000
> r17 : 000000000000005c r18 : 00000000000000ff r19 : 0000000000000000
> r20 : 0000000000000000 r21 : a000000100b7aef4 r22 : 00000000005c100a
> r23 : 0000000000000000 r24 : a000000100b3c0b0 r25 : 00000000005c100a
> r26 : 0000000000000000 r27 : a000000100b3c0b8 r28 : 0000000000ffffff
> r29 : a000000100b3b0c0 r30 : 00000000000000ff r31 : a000000100b3b0c0
>
> Call Trace:
> [<a000000100010470>] show_stack+0x50/0xa0
> sp=e0000040fedbf940 bsp=e0000040fedb8e80
> [<a000000100010d30>] show_regs+0x810/0x840
> sp=e0000040fedbfb10 bsp=e0000040fedb8e38
> [<a000000100032d10>] die+0x1d0/0x2c0
> sp=e0000040fedbfb10 bsp=e0000040fedb8de8
> [<a000000100051360>] ia64_do_page_fault+0x840/0x940
> sp=e0000040fedbfb30 bsp=e0000040fedb8d88
> [<a00000010000b060>] ia64_leave_kernel+0x0/0x280
> sp=e0000040fedbfbc0 bsp=e0000040fedb8d88
> [<a0000001003b2980>] acpi_os_read_port+0x1a0/0x2e0
> sp=e0000040fedbfd90 bsp=e0000040fedb8d40
> [<a0000001003d5090>] acpi_hw_low_level_read+0x190/0x200
> sp=e0000040fedbfda0 bsp=e0000040fedb8d10
> [<a0000001003d5270>] acpi_hw_register_read+0x170/0x400
> sp=e0000040fedbfdb0 bsp=e0000040fedb8cc8
> [<a0000001003d5d40>] acpi_set_register+0xc0/0x340
> sp=e0000040fedbfdc0 bsp=e0000040fedb8c90
> [<a0000001003be900>] acpi_ev_initialize_events+0x80/0x180
> sp=e0000040fedbfdd0 bsp=e0000040fedb8c68
> [<a0000001003ecfb0>] acpi_enable_subsystem+0xf0/0x180
> sp=e0000040fedbfdd0 bsp=e0000040fedb8c38
> [<a0000001009bdbc0>] acpi_init+0x80/0x460
> sp=e0000040fedbfdd0 bsp=e0000040fedb8c10
> [<a00000010098d520>] init+0x400/0x660
> sp=e0000040fedbfe00 bsp=e0000040fedb8bc8
> [<a000000100012450>] kernel_thread_helper+0x30/0x60
> sp=e0000040fedbfe30 bsp=e0000040fedb8ba0
> [<a000000100008d40>] start_kernel_thread+0x20/0x40
> sp=e0000040fedbfe30 bsp=e0000040fedb8ba0
> Kernel panic - not syncing: Attempted to kill init!
>
Hmm, we seem to have touched a register that isn't there.
Assuming building w/o NUMA doesn't somehow magically fix this...
build with CONFIG_ACPI_DEBUG=y and boot with acpi_dbg_level=0xffffffff
and acpi_dbg_layer=0x2 and that should tell us everything about ACPICA's
attempt to talk to hardware registers.
thanks,
-Len
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
