Here is the RCU priority-boosting patch. Pretty close to the
http://lkml.org/lkml/2007/1/24/295 version. This patch prevents
preempted or blocked low-priority RCU readers from indefinitely
stalling RCU grace periods.
Signed-off-by: Paul E. McKenney <[email protected]>
---
include/linux/init_task.h | 12 +
include/linux/rcupdate.h | 12 +
include/linux/rcupreempt.h | 20 +
include/linux/sched.h | 16 +
init/main.c | 1
kernel/Kconfig.preempt | 32 ++
kernel/fork.c | 6
kernel/rcupreempt.c | 528 +++++++++++++++++++++++++++++++++++++++++++++
kernel/rtmutex.c | 7
kernel/sched.c | 5
10 files changed, 636 insertions(+), 3 deletions(-)
diff -urpNa -X dontdiff linux-2.6.20-rc4-rt1/include/linux/init_task.h linux-2.6.20-rc4-rt1-rcub/include/linux/init_task.h
--- linux-2.6.20-rc4-rt1/include/linux/init_task.h 2007-01-09 10:59:54.000000000 -0800
+++ linux-2.6.20-rc4-rt1-rcub/include/linux/init_task.h 2007-01-09 11:01:12.000000000 -0800
@@ -87,6 +87,17 @@ extern struct nsproxy init_nsproxy;
.siglock = __SPIN_LOCK_UNLOCKED(sighand.siglock), \
}
+#ifdef CONFIG_PREEMPT_RCU_BOOST
+#define INIT_RCU_BOOST_PRIO .rcu_prio = MAX_PRIO,
+#define INIT_PREEMPT_RCU_BOOST(tsk) \
+ .rcub_rbdp = NULL, \
+ .rcub_state = RCU_BOOST_IDLE, \
+ .rcub_entry = LIST_HEAD_INIT(tsk.rcub_entry),
+#else /* #ifdef CONFIG_PREEMPT_RCU_BOOST */
+#define INIT_RCU_BOOST_PRIO
+#define INIT_PREEMPT_RCU_BOOST(tsk)
+#endif /* #else #ifdef CONFIG_PREEMPT_RCU_BOOST */
+
extern struct group_info init_groups;
/*
@@ -143,6 +154,7 @@ extern struct group_info init_groups;
.pi_lock = RAW_SPIN_LOCK_UNLOCKED(tsk.pi_lock), \
INIT_TRACE_IRQFLAGS \
INIT_LOCKDEP \
+ INIT_PREEMPT_RCU_BOOST(tsk) \
}
diff -urpNa -X dontdiff linux-2.6.20-rc4-rt1/include/linux/rcupdate.h linux-2.6.20-rc4-rt1-rcub/include/linux/rcupdate.h
--- linux-2.6.20-rc4-rt1/include/linux/rcupdate.h 2007-01-09 10:59:54.000000000 -0800
+++ linux-2.6.20-rc4-rt1-rcub/include/linux/rcupdate.h 2007-01-09 11:01:12.000000000 -0800
@@ -227,6 +227,18 @@ extern void rcu_barrier(void);
extern void rcu_init(void);
extern void rcu_advance_callbacks(int cpu, int user);
extern void rcu_check_callbacks(int cpu, int user);
+#ifdef CONFIG_PREEMPT_RCU_BOOST
+extern void init_rcu_boost_late(void);
+extern void __rcu_preempt_boost(void);
+#define rcu_preempt_boost() \
+ do { \
+ if (unlikely(current->rcu_read_lock_nesting > 0)) \
+ __rcu_preempt_boost(); \
+ } while (0)
+#else /* #ifdef CONFIG_PREEMPT_RCU_BOOST */
+#define init_rcu_boost_late()
+#define rcu_preempt_boost()
+#endif /* #else #ifdef CONFIG_PREEMPT_RCU_BOOST */
#endif /* __KERNEL__ */
#endif /* __LINUX_RCUPDATE_H */
diff -urpNa -X dontdiff linux-2.6.20-rc4-rt1/include/linux/rcupreempt.h linux-2.6.20-rc4-rt1-rcub/include/linux/rcupreempt.h
--- linux-2.6.20-rc4-rt1/include/linux/rcupreempt.h 2007-01-09 10:59:54.000000000 -0800
+++ linux-2.6.20-rc4-rt1-rcub/include/linux/rcupreempt.h 2007-01-25 16:30:46.000000000 -0800
@@ -42,6 +42,26 @@
#include <linux/cpumask.h>
#include <linux/seqlock.h>
+#ifdef CONFIG_PREEMPT_RCU_BOOST
+/*
+ * Task state with respect to being RCU-boosted. This state is changed
+ * by the task itself in response to the following three events:
+ * 1. Preemption (or block on lock) while in RCU read-side critical section.
+ * 2. Outermost rcu_read_unlock() for blocked RCU read-side critical section.
+ *
+ * The RCU-boost task also updates the state when boosting priority.
+ */
+enum rcu_boost_state {
+ RCU_BOOST_IDLE = 0, /* Not yet blocked if in RCU read-side. */
+ RCU_BOOST_BLOCKED = 1, /* Blocked from RCU read-side. */
+ RCU_BOOSTED = 2, /* Boosting complete. */
+ RCU_BOOST_INVALID = 3, /* For bogus state sightings. */
+};
+
+#define N_RCU_BOOST_STATE (RCU_BOOST_INVALID + 1)
+
+#endif /* #ifdef CONFIG_PREEMPT_RCU_BOOST */
+
#define rcu_qsctr_inc(cpu)
#define rcu_bh_qsctr_inc(cpu)
#define call_rcu_bh(head, rcu) call_rcu(head, rcu)
diff -urpNa -X dontdiff linux-2.6.20-rc4-rt1/include/linux/sched.h linux-2.6.20-rc4-rt1-rcub/include/linux/sched.h
--- linux-2.6.20-rc4-rt1/include/linux/sched.h 2007-01-09 10:59:54.000000000 -0800
+++ linux-2.6.20-rc4-rt1-rcub/include/linux/sched.h 2007-01-09 11:01:12.000000000 -0800
@@ -699,6 +699,14 @@ struct signal_struct {
#define is_rt_policy(p) ((p) != SCHED_NORMAL && (p) != SCHED_BATCH)
#define has_rt_policy(p) unlikely(is_rt_policy((p)->policy))
+#ifdef CONFIG_PREEMPT_RCU_BOOST
+#define set_rcu_prio(p, prio) ((p)->rcu_prio = (prio))
+#define get_rcu_prio(p) ((p)->rcu_prio)
+#else /* #ifdef CONFIG_PREEMPT_RCU_BOOST */
+#define set_rcu_prio(p, prio) do { } while (0)
+#define get_rcu_prio(p) MAX_PRIO
+#endif /* #else #ifdef CONFIG_PREEMPT_RCU_BOOST */
+
/*
* Some day this will be a full-fledged user tracking system..
*/
@@ -982,6 +990,9 @@ struct task_struct {
#endif
int load_weight; /* for niceness load balancing purposes */
int prio, static_prio, normal_prio;
+#ifdef CONFIG_PREEMPT_RCU_BOOST
+ int rcu_prio;
+#endif /* #ifdef CONFIG_PREEMPT_RCU_BOOST */
struct list_head run_list;
struct prio_array *array;
@@ -1003,6 +1014,11 @@ struct task_struct {
atomic_t *rcu_flipctr1;
atomic_t *rcu_flipctr2;
#endif
+#ifdef CONFIG_PREEMPT_RCU_BOOST
+ struct rcu_boost_dat *rcub_rbdp;
+ enum rcu_boost_state rcub_state;
+ struct list_head rcub_entry;
+#endif /* #ifdef CONFIG_PREEMPT_RCU_BOOST */
#if defined(CONFIG_SCHEDSTATS) || defined(CONFIG_TASK_DELAY_ACCT)
struct sched_info sched_info;
diff -urpNa -X dontdiff linux-2.6.20-rc4-rt1/init/main.c linux-2.6.20-rc4-rt1-rcub/init/main.c
--- linux-2.6.20-rc4-rt1/init/main.c 2007-01-09 10:59:54.000000000 -0800
+++ linux-2.6.20-rc4-rt1-rcub/init/main.c 2007-01-09 11:01:12.000000000 -0800
@@ -712,6 +712,7 @@ static void __init do_basic_setup(void)
init_workqueues();
usermodehelper_init();
driver_init();
+ init_rcu_boost_late();
#ifdef CONFIG_SYSCTL
sysctl_init();
diff -urpNa -X dontdiff linux-2.6.20-rc4-rt1/kernel/Kconfig.preempt linux-2.6.20-rc4-rt1-rcub/kernel/Kconfig.preempt
--- linux-2.6.20-rc4-rt1/kernel/Kconfig.preempt 2007-01-09 10:59:54.000000000 -0800
+++ linux-2.6.20-rc4-rt1-rcub/kernel/Kconfig.preempt 2007-01-09 11:01:12.000000000 -0800
@@ -176,3 +176,35 @@ config RCU_TRACE
Say Y here if you want to enable RCU tracing
Say N if you are unsure.
+
+config PREEMPT_RCU_BOOST
+ bool "Enable priority boosting of RCU read-side critical sections"
+ depends on PREEMPT_RCU
+ default n
+ help
+ This option permits priority boosting of RCU read-side critical
+ sections that have been preempted in order to prevent indefinite
+ delay of grace periods in face of runaway non-realtime processes.
+
+ Say N if you are unsure.
+
+config PREEMPT_RCU_BOOST_STATS
+ bool "Enable RCU priority-boosting statistic printing"
+ depends on PREEMPT_RCU_BOOST
+ default n
+ help
+ This option enables debug printk()s of RCU boost statistics,
+ which are normally only used to debug RCU priority boost
+ implementations.
+
+ Say N if you are unsure.
+
+config PREEMPT_RCU_BOOST_STATS_INTERVAL
+ int "RCU priority-boosting statistic printing interval (seconds)"
+ depends on PREEMPT_RCU_BOOST_STATS
+ default 100
+ range 10 86400
+ help
+ This option controls the timing of debug printk()s of RCU boost
+ statistics, which are normally only used to debug RCU priority
+ boost implementations.
diff -urpNa -X dontdiff linux-2.6.20-rc4-rt1/kernel/fork.c linux-2.6.20-rc4-rt1-rcub/kernel/fork.c
--- linux-2.6.20-rc4-rt1/kernel/fork.c 2007-01-09 10:59:54.000000000 -0800
+++ linux-2.6.20-rc4-rt1-rcub/kernel/fork.c 2007-01-09 11:01:12.000000000 -0800
@@ -1129,6 +1129,12 @@ static struct task_struct *copy_process(
p->softirq_context = 0;
#endif
p->pagefault_disabled = 0;
+#ifdef CONFIG_PREEMPT_RCU_BOOST
+ p->rcu_prio = MAX_PRIO;
+ p->rcub_rbdp = NULL;
+ p->rcub_state = RCU_BOOST_IDLE;
+ INIT_LIST_HEAD(&p->rcub_entry);
+#endif
#ifdef CONFIG_LOCKDEP
p->lockdep_depth = 0; /* no locks held yet */
p->curr_chain_key = 0;
diff -urpNa -X dontdiff linux-2.6.20-rc4-rt1/kernel/rcupreempt.c linux-2.6.20-rc4-rt1-rcub/kernel/rcupreempt.c
--- linux-2.6.20-rc4-rt1/kernel/rcupreempt.c 2007-01-09 10:59:54.000000000 -0800
+++ linux-2.6.20-rc4-rt1-rcub/kernel/rcupreempt.c 2007-01-25 11:53:47.000000000 -0800
@@ -49,6 +49,7 @@
#include <linux/byteorder/swabb.h>
#include <linux/cpumask.h>
#include <linux/rcupreempt_trace.h>
+#include <linux/kthread.h>
/*
* PREEMPT_RCU data structures.
@@ -80,6 +81,526 @@ static struct rcu_ctrlblk rcu_ctrlblk =
static DEFINE_PER_CPU(atomic_t [2], rcu_flipctr) =
{ ATOMIC_INIT(0), ATOMIC_INIT(0) };
+#ifndef CONFIG_PREEMPT_RCU_BOOST
+static inline void init_rcu_boost_early(void) { }
+static inline void rcu_read_unlock_unboost(void) { }
+#else /* #ifndef CONFIG_PREEMPT_RCU_BOOST */
+
+/* Defines possible event indices for ->rbs_stats[] (first index). */
+
+#define RCU_BOOST_DAT_BLOCK 0
+#define RCU_BOOST_DAT_BOOST 1
+#define RCU_BOOST_DAT_UNLOCK 2
+#define N_RCU_BOOST_DAT_EVENTS 3
+
+/* RCU-boost per-CPU array element. */
+
+struct rcu_boost_dat {
+ raw_spinlock_t rbs_mutex;
+ struct list_head rbs_toboost;
+ struct list_head rbs_boosted;
+ unsigned long rbs_blocked;
+ unsigned long rbs_boost_attempt;
+ unsigned long rbs_boost;
+ unsigned long rbs_unlock;
+ unsigned long rbs_unboosted;
+#ifdef CONFIG_PREEMPT_RCU_BOOST_STATS
+ unsigned long rbs_stats[N_RCU_BOOST_DAT_EVENTS][N_RCU_BOOST_STATE];
+#endif /* #ifdef CONFIG_PREEMPT_RCU_BOOST_STATS */
+};
+#define RCU_BOOST_ELEMENTS 4
+
+int rcu_boost_idx = -1; /* invalid value in case someone uses RCU early. */
+DEFINE_PER_CPU(struct rcu_boost_dat, rcu_boost_dat[RCU_BOOST_ELEMENTS]);
+static struct task_struct *rcu_boost_task = NULL;
+
+#ifdef CONFIG_PREEMPT_RCU_BOOST_STATS
+
+/*
+ * Function to increment indicated ->rbs_stats[] element.
+ */
+static inline void rcu_boost_dat_stat(struct rcu_boost_dat *rbdp,
+ int event,
+ enum rcu_boost_state oldstate)
+{
+ if (oldstate >= RCU_BOOST_IDLE &&
+ oldstate <= RCU_BOOSTED) {
+ rbdp->rbs_stats[event][oldstate]++;
+ } else {
+ rbdp->rbs_stats[event][RCU_BOOST_INVALID]++;
+ }
+}
+
+#define rcu_boost_dat_stat_block(rbdp, oldstate) \
+ rcu_boost_dat_stat(rbdp, RCU_BOOST_DAT_BLOCK, oldstate)
+#define rcu_boost_dat_stat_boost(rbdp, oldstate) \
+ rcu_boost_dat_stat(rbdp, RCU_BOOST_DAT_BOOST, oldstate)
+#define rcu_boost_dat_stat_unlock(rbdp, oldstate) \
+ rcu_boost_dat_stat(rbdp, RCU_BOOST_DAT_UNLOCK, oldstate)
+
+/*
+ * Prefix for kprint() strings for periodic statistics messages.
+ */
+static char *rcu_boost_state_event[] = {
+ "block: ",
+ "boost: ",
+ "unlock: ",
+};
+
+/*
+ * Indicators for numbers in kprint() strings. "!" indicates a state-event
+ * pair that should not happen, while "?" indicates a state that should
+ * not happen.
+ */
+static char *rcu_boost_state_error[] = {
+ /*ibBe*/
+ " ?", /* block */
+ "! ?", /* boost */
+ "? ?", /* unlock */
+};
+
+/*
+ * Print out RCU booster task statistics at the specified interval.
+ */
+static void rcu_boost_dat_stat_print(void)
+{
+ /* Three decimal digits per byte plus spacing per number and line. */
+ char buf[N_RCU_BOOST_STATE * (sizeof(long) * 3 + 2) + 2];
+ int cpu;
+ int event;
+ int i;
+ static time_t lastprint = 0;
+ struct rcu_boost_dat *rbdp;
+ int state;
+ struct rcu_boost_dat sum;
+
+ /* Wait a graceful interval between printk spamming. */
+
+ if (xtime.tv_sec - lastprint <
+ CONFIG_PREEMPT_RCU_BOOST_STATS_INTERVAL)
+ return;
+
+ /* Sum up the state/event-independent counters. */
+
+ sum.rbs_blocked = 0;
+ sum.rbs_boost_attempt = 0;
+ sum.rbs_boost = 0;
+ sum.rbs_unlock = 0;
+ sum.rbs_unboosted = 0;
+ for_each_possible_cpu(cpu)
+ for (i = 0; i < RCU_BOOST_ELEMENTS; i++) {
+ rbdp = per_cpu(rcu_boost_dat, cpu);
+ sum.rbs_blocked += rbdp[i].rbs_blocked;
+ sum.rbs_boost_attempt += rbdp[i].rbs_boost_attempt;
+ sum.rbs_boost += rbdp[i].rbs_boost;
+ sum.rbs_unlock += rbdp[i].rbs_unlock;
+ sum.rbs_unboosted += rbdp[i].rbs_unboosted;
+ }
+
+ /* Sum up the state/event-dependent counters. */
+
+ for (event = 0; event < N_RCU_BOOST_DAT_EVENTS; event++)
+ for (state = 0; state < N_RCU_BOOST_STATE; state++) {
+ sum.rbs_stats[event][state] = 0;
+ for_each_possible_cpu(cpu) {
+ for (i = 0; i < RCU_BOOST_ELEMENTS; i++) {
+ sum.rbs_stats[event][state]
+ += per_cpu(rcu_boost_dat,
+ cpu)[i].rbs_stats[event][state];
+ }
+ }
+ }
+
+ /* Print them out! */
+
+ printk(KERN_ALERT
+ "rcu_boost_dat: idx=%d "
+ "b=%lu ul=%lu ub=%lu boost: a=%lu b=%lu\n",
+ rcu_boost_idx,
+ sum.rbs_blocked, sum.rbs_unlock, sum.rbs_unboosted,
+ sum.rbs_boost_attempt, sum.rbs_boost);
+ for (event = 0; event < N_RCU_BOOST_DAT_EVENTS; event++) {
+ i = 0;
+ for (state = 0; state < N_RCU_BOOST_STATE; state++) {
+ i += sprintf(&buf[i], " %ld%c",
+ sum.rbs_stats[event][state],
+ rcu_boost_state_error[event][state]);
+ }
+ printk(KERN_ALERT "rcu_boost_dat %s %s\n",
+ rcu_boost_state_event[event], buf);
+ }
+
+ /* Go away and don't come back for awhile. */
+
+ lastprint = xtime.tv_sec;
+}
+
+#else /* #ifdef CONFIG_PREEMPT_RCU_BOOST_STATS */
+
+#define rcu_boost_dat_stat_block(rbdp, oldstate)
+#define rcu_boost_dat_stat_boost(rbdp, oldstate)
+#define rcu_boost_dat_stat_unlock(rbdp, oldstate)
+#define rcu_boost_dat_stat_print()
+
+#endif /* #else #ifdef CONFIG_PREEMPT_RCU_BOOST_STATS */
+
+/*
+ * Initialize RCU-boost state. This happens early in the boot process,
+ * when the scheduler does not yet exist. So don't try to use it.
+ */
+static void init_rcu_boost_early(void)
+{
+ struct rcu_boost_dat *rbdp;
+ int cpu;
+ int i;
+
+ for_each_possible_cpu(cpu) {
+ rbdp = per_cpu(rcu_boost_dat, cpu);
+ for (i = 0; i < RCU_BOOST_ELEMENTS; i++) {
+ rbdp[i].rbs_mutex =
+ RAW_SPIN_LOCK_UNLOCKED(rbdp[i].rbs_mutex);
+ INIT_LIST_HEAD(&rbdp[i].rbs_toboost);
+ INIT_LIST_HEAD(&rbdp[i].rbs_boosted);
+ rbdp[i].rbs_blocked = 0;
+ rbdp[i].rbs_boost_attempt = 0;
+ rbdp[i].rbs_boost = 0;
+ rbdp[i].rbs_unlock = 0;
+ rbdp[i].rbs_unboosted = 0;
+#ifdef CONFIG_PREEMPT_RCU_BOOST_STATS
+ {
+ int j, k;
+
+ for (j = 0; j < N_RCU_BOOST_DAT_EVENTS; j++)
+ for (k = 0; k < N_RCU_BOOST_STATE; k++)
+ rbdp[i].rbs_stats[j][k] = 0;
+ }
+#endif /* #ifdef CONFIG_PREEMPT_RCU_BOOST_STATS */
+ }
+ smp_wmb(); /* Make sure readers see above initialization. */
+ rcu_boost_idx = 0; /* Allow readers to access data. */
+ }
+}
+
+/*
+ * Return the list on which the calling task should add itself, or
+ * NULL if too early during initialization.
+ */
+static inline struct rcu_boost_dat *rcu_rbd_new(void)
+{
+ int cpu = raw_smp_processor_id(); /* locks used, so preemption OK. */
+ int idx = rcu_boost_idx;
+
+ smp_read_barrier_depends(); barrier(); /* rmb() on Alpha for idx. */
+ if (unlikely(idx < 0))
+ return (NULL);
+ return &per_cpu(rcu_boost_dat, cpu)[idx];
+}
+
+/*
+ * Return the list from which to boost target tasks.
+ * May only be invoked by the booster task, so guaranteed to
+ * already be initialized. Use rcu_boost_dat element least recently
+ * the destination for task blocking in RCU read-side critical sections.
+ */
+static inline struct rcu_boost_dat *rcu_rbd_boosting(int cpu)
+{
+ int idx = (rcu_boost_idx + 1) & (RCU_BOOST_ELEMENTS - 1);
+
+ return &per_cpu(rcu_boost_dat, cpu)[idx];
+}
+
+#define PREEMPT_RCU_BOOSTER_PRIO 49 /* Match curr_irq_prio manually. */
+ /* Administrators can always adjust */
+ /* via the /proc interface. */
+
+/*
+ * Boost the specified task from an RCU viewpoint.
+ * Boost the target task to a priority just a bit less-favored than
+ * that of the RCU-boost task, but boost to a realtime priority even
+ * if the RCU-boost task is running at a non-realtime priority.
+ * We check the priority of the RCU-boost task each time we boost
+ * in case the sysadm manually changes the priority.
+ */
+static void rcu_boost_prio(struct task_struct *taskp)
+{
+ unsigned long oldirq;
+ int rcuprio;
+
+ spin_lock_irqsave(¤t->pi_lock, oldirq);
+ rcuprio = rt_mutex_getprio(current) + 1;
+ if (rcuprio >= MAX_USER_RT_PRIO)
+ rcuprio = MAX_USER_RT_PRIO - 1;
+ spin_unlock_irqrestore(¤t->pi_lock, oldirq);
+ spin_lock_irqsave(&taskp->pi_lock, oldirq);
+ if (taskp->rcu_prio != rcuprio) {
+ taskp->rcu_prio = rcuprio;
+ if (taskp->rcu_prio != taskp->prio)
+ rt_mutex_setprio(taskp, taskp->rcu_prio);
+ }
+ spin_unlock_irqrestore(&taskp->pi_lock, oldirq);
+}
+
+/*
+ * Unboost the specified task from an RCU viewpoint.
+ */
+static void rcu_unboost_prio(struct task_struct *taskp)
+{
+ int nprio;
+ unsigned long oldirq;
+
+ spin_lock_irqsave(&taskp->pi_lock, oldirq);
+ taskp->rcu_prio = MAX_PRIO;
+ nprio = rt_mutex_getprio(taskp);
+ if (nprio > taskp->prio)
+ rt_mutex_setprio(taskp, nprio);
+ spin_unlock_irqrestore(&taskp->pi_lock, oldirq);
+}
+
+/*
+ * Boost all of the RCU-reader tasks on the specified list.
+ */
+static void rcu_boost_one_reader_list(struct rcu_boost_dat *rbdp)
+{
+ LIST_HEAD(list);
+ unsigned long oldirq;
+ struct task_struct *taskp;
+
+ /*
+ * Splice both lists onto a local list. We will still
+ * need to hold the lock when manipulating the local list
+ * because tasks can remove themselves at any time.
+ * The reason for splicing the rbs_boosted list is that
+ * our priority may have changed, so reboosting may be
+ * required.
+ */
+
+ spin_lock_irqsave(&rbdp->rbs_mutex, oldirq);
+ list_splice_init(&rbdp->rbs_toboost, &list);
+ list_splice_init(&rbdp->rbs_boosted, &list);
+ while (!list_empty(&list)) {
+
+ /*
+ * Pause for a bit before boosting each task.
+ * @@@FIXME: reduce/eliminate pausing in case of OOM.
+ */
+
+ spin_unlock_irqrestore(&rbdp->rbs_mutex, oldirq);
+ schedule_timeout_uninterruptible(1);
+ spin_lock_irqsave(&rbdp->rbs_mutex, oldirq);
+
+ /*
+ * All tasks might have removed themselves while
+ * we were waiting. Recheck list emptiness.
+ */
+
+ if (list_empty(&list))
+ break;
+
+ /* Remove first task in local list, count the attempt. */
+
+ taskp = list_entry(list.next, typeof(*taskp), rcub_entry);
+ list_del_init(&taskp->rcub_entry);
+ rbdp->rbs_boost_attempt++;
+
+ /* Ignore tasks in unexpected states. */
+
+ if (taskp->rcub_state == RCU_BOOST_IDLE) {
+ list_add_tail(&taskp->rcub_entry, &rbdp->rbs_toboost);
+ rcu_boost_dat_stat_boost(rbdp, taskp->rcub_state);
+ continue;
+ }
+
+ /* Boost the task's priority. */
+
+ rcu_boost_prio(taskp);
+ rbdp->rbs_boost++;
+ rcu_boost_dat_stat_boost(rbdp, taskp->rcub_state);
+ taskp->rcub_state = RCU_BOOSTED;
+ list_add_tail(&taskp->rcub_entry, &rbdp->rbs_boosted);
+ }
+ spin_unlock_irqrestore(&rbdp->rbs_mutex, oldirq);
+}
+
+/*
+ * Priority-boost tasks stuck in RCU read-side critical sections as
+ * needed (presumably rarely).
+ */
+static int rcu_booster(void *arg)
+{
+ int cpu;
+ struct sched_param sp;
+
+ sp.sched_priority = PREEMPT_RCU_BOOSTER_PRIO;
+ sched_setscheduler(current, SCHED_RR, &sp);
+ current->flags |= PF_NOFREEZE;
+
+ do {
+
+ /* Advance the lists of tasks. */
+
+ rcu_boost_idx = (rcu_boost_idx + 1) % RCU_BOOST_ELEMENTS;
+ for_each_possible_cpu(cpu) {
+
+ /*
+ * Boost all sufficiently aged readers.
+ * Readers must first be preempted or block
+ * on a mutex in an RCU read-side critical section,
+ * then remain in that critical section for
+ * RCU_BOOST_ELEMENTS-1 time intervals.
+ * So most of the time we should end up doing
+ * nothing.
+ */
+
+ rcu_boost_one_reader_list(rcu_rbd_boosting(cpu));
+
+ /*
+ * Large SMP systems may need to sleep sometimes
+ * in this loop. Or have multiple RCU-boost tasks.
+ */
+ }
+
+ /*
+ * Sleep to allow any unstalled RCU read-side critical
+ * sections to age out of the list. @@@ FIXME: reduce,
+ * adjust, or eliminate in case of OOM.
+ */
+
+ schedule_timeout_uninterruptible(HZ / 100);
+
+ /* Print stats if enough time has passed. */
+
+ rcu_boost_dat_stat_print();
+
+ } while (!kthread_should_stop());
+
+ return 0;
+}
+
+/*
+ * Perform the portions of RCU-boost initialization that require the
+ * scheduler to be up and running.
+ */
+void init_rcu_boost_late(void)
+{
+
+ /* Spawn RCU-boost task. */
+
+ printk(KERN_INFO "Starting RCU priority booster\n");
+ rcu_boost_task = kthread_run(rcu_booster, NULL, "RCU Prio Booster");
+ if (IS_ERR(rcu_boost_task)) {
+ printk(KERN_ALERT
+ "Unable to create RCU Priority Booster, errno %d\n",
+ -PTR_ERR(rcu_boost_task));
+
+ /*
+ * Continue running, but tasks permanently blocked
+ * in RCU read-side critical sections will be able
+ * to stall grace-period processing, potentially
+ * OOMing the machine.
+ */
+
+ rcu_boost_task = NULL;
+ }
+}
+
+/*
+ * Update task's RCU-boost state to reflect blocking in RCU read-side
+ * critical section, so that the RCU-boost task can find it in case it
+ * later needs its priority boosted.
+ */
+void __rcu_preempt_boost(void)
+{
+ struct rcu_boost_dat *rbdp;
+ unsigned long oldirq;
+
+ /* Identify list to place task on for possible later boosting. */
+
+ local_irq_save(oldirq);
+ rbdp = rcu_rbd_new();
+ if (rbdp == NULL) {
+ local_irq_restore(oldirq);
+ printk(KERN_ALERT
+ "Preempted RCU read-side critical section too early.\n");
+ return;
+ }
+ spin_lock(&rbdp->rbs_mutex);
+ rbdp->rbs_blocked++;
+
+ /*
+ * Update state. We hold the lock and aren't yet on the list,
+ * so the booster cannot mess with us yet.
+ */
+
+ rcu_boost_dat_stat_block(rbdp, current->rcub_state);
+ if (current->rcub_state != RCU_BOOST_IDLE) {
+
+ /*
+ * We have been here before, so just update stats.
+ * It may seem strange to do all this work just to
+ * accumulate statistics, but this is such a
+ * low-probability code path that we shouldn't care.
+ * If it becomes a problem, it can be fixed.
+ */
+
+ spin_unlock_irqrestore(&rbdp->rbs_mutex, oldirq);
+ return;
+ }
+ current->rcub_state = RCU_BOOST_BLOCKED;
+
+ /* Now add ourselves to the list so that the booster can find us. */
+
+ list_add_tail(¤t->rcub_entry, &rbdp->rbs_toboost);
+ current->rcub_rbdp = rbdp;
+ spin_unlock_irqrestore(&rbdp->rbs_mutex, oldirq);
+}
+
+/*
+ * Do the list-removal and priority-unboosting "heavy lifting" when
+ * required.
+ */
+static void __rcu_read_unlock_unboost(void)
+{
+ unsigned long oldirq;
+ struct rcu_boost_dat *rbdp;
+
+ /* Identify the list structure and acquire the corresponding lock. */
+
+ rbdp = current->rcub_rbdp;
+ spin_lock_irqsave(&rbdp->rbs_mutex, oldirq);
+
+ /* Remove task from the list it was on. */
+
+ list_del_init(¤t->rcub_entry);
+ rbdp->rbs_unlock++;
+ current->rcub_rbdp = NULL;
+
+ /* Record stats, unboost if needed, and update state. */
+
+ rcu_boost_dat_stat_unlock(rbdp, current->rcub_state);
+ if (current->rcub_state == RCU_BOOSTED) {
+ rcu_unboost_prio(current);
+ rbdp->rbs_unboosted++;
+ }
+ current->rcub_state = RCU_BOOST_IDLE;
+ spin_unlock_irqrestore(&rbdp->rbs_mutex, oldirq);
+}
+
+/*
+ * Do any state changes and unboosting needed for rcu_read_unlock().
+ * Pass any complex work on to __rcu_read_unlock_unboost().
+ * The vast majority of the time, no work will be needed, as preemption
+ * and blocking within RCU read-side critical sections is comparatively
+ * rare.
+ */
+static inline void rcu_read_unlock_unboost(void)
+{
+
+ if (unlikely(current->rcub_state != RCU_BOOST_IDLE))
+ __rcu_read_unlock_unboost();
+}
+
+#endif /* #else #ifndef CONFIG_PREEMPT_RCU_BOOST */
+
/*
* Return the number of RCU batches processed thus far. Useful
* for debug and statistics.
@@ -155,6 +676,7 @@ void __rcu_read_unlock(void)
atomic_dec(current->rcu_flipctr2);
current->rcu_flipctr2 = NULL;
}
+ rcu_read_unlock_unboost();
}
local_irq_restore(oldirq);
@@ -345,6 +867,11 @@ int notrace rcu_pending(int cpu)
rcu_data.nextlist != NULL);
}
+/*
+ * Initialize RCU. This is called very early in boot, so is restricted
+ * to very simple operations. Don't even think about messing with anything
+ * that involves the scheduler, as it doesn't exist yet.
+ */
void __init __rcu_init(void)
{
/*&&&&*/printk("WARNING: experimental RCU implementation.\n");
@@ -356,6 +883,7 @@ void __init __rcu_init(void)
rcu_data.waittail = &rcu_data.waitlist;
rcu_data.donelist = NULL;
rcu_data.donetail = &rcu_data.donelist;
+ init_rcu_boost_early();
tasklet_init(&rcu_data.rcu_tasklet, rcu_process_callbacks, 0UL);
}
diff -urpNa -X dontdiff linux-2.6.20-rc4-rt1/kernel/rtmutex.c linux-2.6.20-rc4-rt1-rcub/kernel/rtmutex.c
--- linux-2.6.20-rc4-rt1/kernel/rtmutex.c 2007-01-09 10:59:54.000000000 -0800
+++ linux-2.6.20-rc4-rt1-rcub/kernel/rtmutex.c 2007-01-25 12:35:44.000000000 -0800
@@ -105,11 +105,12 @@ static inline void init_lists(struct rt_
*/
int rt_mutex_getprio(struct task_struct *task)
{
+ int prio = min(task->normal_prio, get_rcu_prio(task));
+
if (likely(!task_has_pi_waiters(task)))
- return task->normal_prio;
+ return prio;
- return min(task_top_pi_waiter(task)->pi_list_entry.prio,
- task->normal_prio);
+ return min(task_top_pi_waiter(task)->pi_list_entry.prio, prio);
}
/*
diff -urpNa -X dontdiff linux-2.6.20-rc4-rt1/kernel/sched.c linux-2.6.20-rc4-rt1-rcub/kernel/sched.c
--- linux-2.6.20-rc4-rt1/kernel/sched.c 2007-01-09 10:59:54.000000000 -0800
+++ linux-2.6.20-rc4-rt1-rcub/kernel/sched.c 2007-01-09 11:01:12.000000000 -0800
@@ -1962,6 +1962,7 @@ void fastcall sched_fork(struct task_str
* Make sure we do not leak PI boosting priority to the child:
*/
p->prio = current->normal_prio;
+ set_rcu_prio(p, MAX_PRIO);
INIT_LIST_HEAD(&p->run_list);
p->array = NULL;
@@ -2044,6 +2045,7 @@ void fastcall wake_up_new_task(struct ta
else {
p->prio = current->prio;
p->normal_prio = current->normal_prio;
+ set_rcu_prio(p, MAX_PRIO);
__activate_task_after(p, current, rq);
}
set_need_resched();
@@ -3986,6 +3988,8 @@ void __sched __schedule(void)
}
profile_hit(SCHED_PROFILING, __builtin_return_address(0));
+ rcu_preempt_boost();
+
preempt_disable(); // FIXME: disable irqs here
prev = current;
release_kernel_lock(prev);
@@ -5725,6 +5729,7 @@ void __cpuinit init_idle(struct task_str
idle->sleep_avg = 0;
idle->array = NULL;
idle->prio = idle->normal_prio = MAX_PRIO;
+ set_rcu_prio(idle, MAX_PRIO);
idle->state = TASK_RUNNING;
idle->cpus_allowed = cpumask_of_cpu(cpu);
set_task_cpu(idle, cpu);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
