The patch is specific to kdump scenario.
What I see in the log is cmd timeout(s) and is not related to the patch.
--Sumant
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Matthias Urlichs
Sent: Wednesday, January 31, 2007 9:50 AM
To: [email protected]
Cc: [email protected]
Subject: Re: [PATCH] scsi: megaraid_{mm,mbox} init fix for kdump
On Fri, 05 Jan 2007 07:10:09 -0800, Sumant Patro wrote:
> This command clears the pending commands in the adapter
> and re-initialize its internal RAID structure.
> Without this change, megaraid driver either panics or fails to
> initialize the adapter during kdump's second kernel boot
> if there are pending commands or interrupts from other devices
> sharing the same IRQ.
Nice. Is there a chance that this patch will also fix the regression
I've noticed (today, unfortunately) on (at least one) Dell server?
FWIW, here's the relevant LSPCI output and kernel logs:
0d:0e.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID (rev 07)
Subsystem: Dell Unknown device 0002
Flags: bus master, stepping, 66MHz, medium devsel, latency 64,
IRQ 18
Memory at d80f0000 (32-bit, prefetchable) [size=64K]
Memory at fc4c0000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at fc500000 [disabled] [size=128K]
Capabilities: [c0] Power Management version 2
Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+
Queue=0/1 Enable-
Capabilities: [e0] PCI-X non-bridge device
Jan 31 14:41:34 kernel: [ 232.873327] megaraid cmm: 2.20.2.7 (Release
Date: Sun Jul 16 00:01:03 EST 2006) Jan 31 14:41:34 kernel: [
232.877616] SCSI subsystem initialized Jan 31 14:41:34 kernel: [
232.888779] megaraid: 2.20.4.9 (Release Date: Sun Jul 16 12:27:22 EST
2006) Jan 31 14:41:34 kernel: [ 232.889835] megasas: 00.00.03.05 Mon Oct
02 11:21:32 PDT 2006 Jan 31 14:41:34 kernel: [ 233.513659] megasas:
0x1028:0x0015:0x1028:0x1f03: <6>megaraid: probe new device
0x1000:0x0408:0x1028:0x0002: bus 13:slot 14:func 0 Jan 31 14:41:34
kernel: [ 233.514770] megasas: FW now in Ready state Jan 31 14:41:34
kernel: [ 233.528893] megaraid: fw version:[522A] bios version:[H430]
Jan 31 14:41:34 kernel: [ 233.554778] scsi2 : LSI Logic SAS based
MegaRAID driver Jan 31 14:41:34 kernel: [ 233.555536] scsi 2:0:0:0:
Direct-Access MAXTOR ATLAS10K5_073SAS BP00 PQ: 0 ANSI: 5 Jan 31 14:41:34
kernel: [ 233.556173] scsi 2:0:1:0: Direct-Access MAXTOR
ATLAS10K5_073SAS BP00 PQ: 0 ANSI: 5 Jan 31 14:41:34 kernel: [
233.569337] scsi3 : LSI Logic MegaRAID driver Jan 31 14:41:34 kernel: [
233.569550] scsi[3]: scanning scsi channel 0 [Phy 0] for non-raid
devices Jan 31 14:41:34 kernel: [ 233.604522] scsi 2:0:8:0: Enclosure DP
BACKPLANE 1.00 PQ: 0 ANSI: 5 Jan 31 14:41:41 kernel: [ 243.115199]
megaraid: aborting-16 cmd=12 <c=0 t=12 l=0> Jan 31 14:41:41 kernel: [
243.115206] megaraid abort: 16:0[0:12], fw owner Jan 31 14:41:41 kernel:
[ 243.115217] megaraid: 1 outstanding commands. Max wait 300 sec Jan 31
14:41:41 kernel: [ 243.115221] megaraid mbox: Wait for 1 commands to
complete:300 Jan 31 14:41:46 kernel: [ 248.125812] megaraid mbox: Wait
for 1 commands to complete:295 Jan 31 14:41:48 kernel: [ 250.134075]
megaraid mbox: reset sequence completed sucessfully Jan 31 14:41:58
kernel: [ 260.117201] megaraid: aborting-16 cmd=0 <c=0 t=12 l=0>Jan 31
14:41:58 kernel: [ 260.117207] megaraid abort: 16:0[0:12], fw owner Jan
31 14:41:58 kernel: [ 260.117217] megaraid: 1 outstanding commands. Max
wait 300 sec Jan 31 14:41:58 kernel: [ 260.117223] megaraid mbox: Wait
for 1 commands to complete:300 Jan 31 14:42:03 kernel: [ 265.127417]
megaraid mbox: Wait for 1 commands to complete:295 Jan 31 14:42:08
kernel: [ 270.140211] megaraid mbox: Wait for 1 commands to complete:290
Jan 31 14:42:12 kernel: [ 274.146803] megaraid mbox: reset sequence
completed sucessfully [ nothing else that appears relevant ]
--
Matthias Urlichs | {M:U} IT Design @ m-u-it.de |
[email protected]
Disclaimer: The quote was selected randomly. Really. |
http://smurf.noris.de
- -
Those who welcome death have only tried it from the ears up.
-- Wilson Mizner
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [email protected] More majordomo info
at http://vger.kernel.org/majordomo-info.html
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]