Am Mittwoch, 31. Januar 2007 14:22 schrieb Ingo Molnar:
>
> * Karsten Wiese <[email protected]> wrote:
>
> > Similar weirdness here on rc6-mm2 and rc6-rt*: resume from disk waits
> > unduly long.
>
> i'm wondering whether the jiffies update fix from Thomas fixes this bug
> for you.
>
> If not then do you have a serial console enabled?
>
> > Some waiting times from rc6-rt6 from memory:
> >
> > Config | HZ | NO_HZ + HRESTIMERS
> > cmos clock unchanged | 2s | 6s
> > cmos clock += 10min | | 2 minutes
> > cmos clock += 2 month | 20s | > 4minutes, test interrupted
>
> i've seen something like this on -rt (and incorrectly attributed it to
> -rt) when running on a system which has a serial port and which has a
> kernel console on that serial port. What happens is that after resume
> (and straight after console suspend) every serial character printed
> takes /alot/ of time - and resume does print a number of kernel messages
> to the console. I didnt get any further in debugging this though, but
> disabling the serial console made the problem go away.
>
> a possibly related thing: the serial code is sensitive to jiffies
> updates and timers, i saw that during early revisions of the dynticks
> code - but the specifics escape me.
>
> the slowdown could also be something like the kernel somehow wrapping
> around jiffies and thus doing /alot/ of jiffy ticks? Or it could be a
> miscalculation in the amount of jiffies that need updating, resulting in
> a similar number of loops in the jiffy update code.
>
> (i'll try to figure out this regression - but wanted to describe to you
> the known things so far, maybe you'll figure it out faster than me.)
Serial port console is off here and the jiffies update fix doesn't make
a noticeable difference.
I've just captured a dmesglog of 3 suspend/resume cycles with printk
timestamps. Config has NO_HZ and HRESTIMERS.
In the 1st 2 cycles, while in bios, I advanced the cmos clock by ~4minutes,
In the last cycle by ~2minutes.
After the
lapic resume on CPU#0
entries there are roughly proportional timestamp differences of ~60s, ~60s
and ~35s. Those equal the unexpected wait times.
Will look into what happens between "lapic resume on CPU#0" and
"pci 0000:00:00.0: EARLY resume" next.
Karsten
[ 0.000000] Linux version 2.6.20-rc6-rt6.dbg ([email protected]) (gcc-Version 4.1.1 20070105 (Red Hat 4.1.1-51)) #3 PREEMPT Wed Jan 31 14:25:07 CET 2007
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000003fef0000 end: 000000003fff0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000003fff0000 size: 0000000000008000 end: 000000003fff8000 type: 3
[ 0.000000] copy_e820_map() start: 000000003fff8000 size: 0000000000008000 end: 0000000040000000 type: 4
[ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fff80000 size: 0000000000080000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff8000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003fff8000 - 0000000040000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] 127MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000fbfc0
[ 0.000000] Entering add_active_range(0, 0, 262128) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 262128
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 262128
[ 0.000000] On node 0 totalpages: 262128
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 255 pages used for memmap
[ 0.000000] HighMem zone: 32497 pages, LIFO batch:7
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP (v000 AMI ) @ 0x000fa3c0
[ 0.000000] ACPI: RSDT (v001 AMIINT VIA_K8 0x00000010 MSFT 0x00000097) @ 0x3fff0000
[ 0.000000] ACPI: FADT (v001 AMIINT VIA_K8 0x00000011 MSFT 0x00000097) @ 0x3fff0030
[ 0.000000] ACPI: MADT (v001 AMIINT VIA_K8 0x00000009 MSFT 0x00000097) @ 0x3fff00c0
[ 0.000000] ACPI: DSDT (v001 VIA VIA_K8 0x00001000 MSFT 0x0100000d) @ 0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:15 APIC version 16
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
[ 0.000000] Detected 2000.346 MHz processor.
[ 22.477053] Real-Time Preemption Support (C) 2004-2007 Ingo Molnar
[ 22.477060] Built 1 zonelists. Total pages: 260081
[ 22.477146] Kernel command line: ro root=LABEL=/ agp=off selinux=off 1
[ 22.477412] mapped APIC to ffffd000 (fee00000)
[ 22.477416] mapped IOAPIC to ffffc000 (fec00000)
[ 22.477421] Enabling fast FPU save and restore... done.
[ 22.477425] Enabling unmasked SIMD FPU exception support... done.
[ 22.477434] Initializing CPU#0
[ 22.477439] WARNING: experimental RCU implementation.
[ 22.477502] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 22.479554] Console: colour VGA+ 80x25
[ 22.485288] num_possible_cpus(): 1
[ 22.486711] CPU#0: allocated 2097152 bytes trace buffer.
[ 22.488149] CPU#0: allocated 2097152 bytes max-trace buffer.
[ 22.489599] allocated 2097152 bytes out-trace buffer.
[ 22.489712] tracer: a total of 6291456 bytes allocated.
[ 22.489823] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 22.489989] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 22.490099] ... MAX_LOCK_DEPTH: 30
[ 22.490210] ... MAX_LOCKDEP_KEYS: 2048
[ 22.490320] ... CLASSHASH_SIZE: 1024
[ 22.490429] ... MAX_LOCKDEP_ENTRIES: 8192
[ 22.490539] ... MAX_LOCKDEP_CHAINS: 16384
[ 22.490648] ... CHAINHASH_SIZE: 8192
[ 22.490757] memory used by lock dependency info: 1096 kB
[ 22.490868] per task-struct memory footprint: 1200 bytes
[ 22.491291] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 22.491835] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 22.521443] Memory: 1024840k/1048512k available (2187k kernel code, 22908k reserved, 1039k data, 200k init, 131008k highmem)
[ 22.521627] virtual kernel memory layout:
[ 22.521629] fixmap : 0xfffaa000 - 0xfffff000 ( 340 kB)
[ 22.521632] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 22.521634] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 22.521637] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 22.521639] .init : 0xc042a000 - 0xc045c000 ( 200 kB)
[ 22.521642] .data : 0xc0322f25 - 0xc0426d34 (1039 kB)
[ 22.521644] .text : 0xc0100000 - 0xc0322f25 (2187 kB)
[ 22.522511] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 22.602851] Calibrating delay using timer specific routine.. 4005.80 BogoMIPS (lpj=8011611)
[ 22.603165] Security Framework v1.0.0 initialized
[ 22.603279] Capability LSM initialized
[ 22.603386] Failure registering Root Plug module with the kernel
[ 22.603501] Failure registering Root Plug module with primary security module.
[ 22.603700] Mount-cache hash table entries: 512
[ 22.604173] CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000000 00000000 00000000
[ 22.604191] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 22.604308] CPU: L2 Cache: 512K (64 bytes/line)
[ 22.604419] CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000000 00000000 00000000
[ 22.604435] Intel machine check architecture supported.
[ 22.604547] Intel machine check reporting enabled on CPU#0.
[ 22.604667] CPU: AMD Athlon(tm) 64 Processor 3200+ stepping 00
[ 22.604880] Checking 'hlt' instruction... OK.
[ 22.618969] ACPI: Core revision 20060707
[ 22.625743] ENABLING IO-APIC IRQs
[ 22.626171] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
[ 22.879023] NET: Registered protocol family 16
[ 22.879415] ACPI: bus type pci registered
[ 22.880276] PCI: PCI BIOS revision 2.10 entry at 0xfdae1, last bus=1
[ 22.880389] PCI: Using configuration type 1
[ 22.880498] Setting up standard PCI resources
[ 22.900250] ACPI: Interpreter enabled
[ 22.900362] ACPI: Using IOAPIC for interrupt routing
[ 22.901486] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 22.901607] PCI: Probing PCI hardware (bus 00)
[ 22.903444] PCI: MSI-K8T-Neo2Fir, attempting to turn soundcard ON
[ 22.903560] PCI: MSI-K8T-Neo2Fir, soundcard on
[ 22.904032] Boot video device is 0000:01:00.0
[ 22.904104] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 22.966889] ACPI: Power Resource [URP1] (off)
[ 22.967146] ACPI: Power Resource [URP2] (off)
[ 22.967402] ACPI: Power Resource [FDDP] (off)
[ 22.967659] ACPI: Power Resource [LPTP] (off)
[ 22.972136] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 22.973387] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 22.974680] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 22.975916] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 22.977195] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 22.978646] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 22.980038] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 22.981427] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 22.982719] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 22.982852] pnp: PnP ACPI init
[ 22.989499] pnp: PnP ACPI: found 10 devices
[ 22.989854] usbcore: registered new interface driver usbfs
[ 22.990050] usbcore: registered new interface driver hub
[ 22.990291] usbcore: registered new device driver usb
[ 22.990502] PCI: Using ACPI for IRQ routing
[ 22.990613] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 22.994622] NetLabel: Initializing
[ 22.994728] NetLabel: domain hash size = 128
[ 22.994837] NetLabel: protocols = UNLABELED CIPSOv4
[ 22.994981] NetLabel: unlabeled traffic allowed by default
[ 22.996525] PCI: Bridge: 0000:00:01.0
[ 22.996633] IO window: disabled.
[ 22.996744] MEM window: cde00000-cfefffff
[ 22.996856] PREFETCH window: bdd00000-cdcfffff
[ 22.996985] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 22.997039] NET: Registered protocol family 2
[ 23.018195] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 23.018625] TCP established hash table entries: 32768 (order: 9, 2752512 bytes)
[ 23.030734] TCP bind hash table entries: 16384 (order: 8, 1310720 bytes)
[ 23.036900] TCP: Hash tables configured (established 32768 bind 16384)
[ 23.037035] TCP reno registered
[ 23.042355] checking if image is initramfs... it is
[ 23.136643] Freeing initrd memory: 1256k freed
[ 23.137406] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 23.137520] apm: overridden by ACPI.
[ 23.138340] audit: initializing netlink socket (disabled)
[ 23.138495] audit(1170253668.500:1): initialized
[ 23.138842] highmem bounce pool size: 64 pages
[ 23.138954] Total HugeTLB memory allocated, 0
[ 23.139322] VFS: Disk quotas dquot_6.5.1
[ 23.139459] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 23.139913] io scheduler noop registered
[ 23.140071] io scheduler anticipatory registered
[ 23.140229] io scheduler deadline registered
[ 23.140407] io scheduler cfq registered (default)
[ 23.140706] PCI: Bypassing VIA 8237 APIC De-Assert Message
[ 23.140994] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 23.152923] Real Time Clock Driver v1.12ac
[ 23.153244] Non-volatile memory driver v1.2
[ 23.153357] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 23.409586] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 23.410579] 00:01: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 23.412600] RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
[ 23.413058] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 23.413176] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 23.413449] VP_IDE: IDE controller at PCI slot 0000:00:0f.0
[ 23.413584] ACPI: PCI Interrupt 0000:00:0f.0[A] -> GSI 20 (level, low) -> IRQ 16
[ 23.413811] VP_IDE: chipset revision 6
[ 23.413918] VP_IDE: not 100% native mode: will probe irqs later
[ 23.415129] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.0
[ 23.415302] ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
[ 23.415575] ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
[ 23.415843] Probing IDE interface ide0...
[ 23.828683] hda: SAMSUNG SP2014N, ATA DISK drive
[ 24.499610] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 24.499885] Probing IDE interface ide1...
[ 25.361806] hdc: TSSTcorpCD/DVDW TS-H552B, ATAPI CD/DVD-ROM drive
[ 26.032779] ide1 at 0x170-0x177,0x376 on irq 15
[ 26.033380] hda: max request size: 512KiB
[ 26.039066] hda: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, UDMA(133)
[ 26.039633] hda: cache flushes supported
[ 26.039833] hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 >
[ 26.094517] usbcore: registered new interface driver libusual
[ 26.094687] usbcore: registered new interface driver hiddev
[ 26.094873] usbcore: registered new interface driver usbhid
[ 26.094987] /home/ka/q/kernel/linux-2.6./20/rc6-rt6-kw/drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 26.095337] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 26.096013] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 26.096253] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 26.096546] mice: PS/2 mouse device common for all mice
[ 26.117810] input: AT Translated Set 2 keyboard as /class/input/input0
[ 26.152373] TCP bic registered
[ 26.152479] Initializing XFRM netlink socket
[ 26.152616] NET: Registered protocol family 1
[ 26.152731] NET: Registered protocol family 17
[ 26.152856] Using IPI Shortcut mode
[ 26.153070] ACPI: (supports S0 S1 S3 S4 S5)
[ 26.153551] *****************************************************************************
[ 26.153720] * *
[ 26.153889] * REMINDER, the following debugging options are turned on in your .config: *
[ 26.154056] * *
[ 26.154222] * CONFIG_CRITICAL_PREEMPT_TIMING *
[ 26.154389] * CONFIG_CRITICAL_IRQSOFF_TIMING *
[ 26.154556] * CONFIG_FUNCTION_TRACE *
[ 26.154750] * CONFIG_LOCKDEP *
[ 26.154917] * *
[ 26.155084] * they may increase runtime overhead and latencies. *
[ 26.155253] * *
[ 26.155423] *****************************************************************************
[ 26.155736] Freeing unused kernel memory: 200k freed
[ 26.155912] Write protecting the kernel read-only data: 766k
[ 26.156215] Time: tsc clocksource has been installed.
[ 26.302780] logips2pp: Detected unknown logitech mouse model 62
[ 26.430080] USB Universal Host Controller Interface driver v3.0
[ 26.430306] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 17
[ 26.430531] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 26.430870] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 26.431231] uhci_hcd 0000:00:10.0: irq 17, io base 0x0000dc00
[ 26.431686] usb usb1: configuration #1 chosen from 1 choice
[ 26.431965] hub 1-0:1.0: USB hub found
[ 26.432100] hub 1-0:1.0: 2 ports detected
[ 26.535831] ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 17
[ 26.536050] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 26.536243] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[ 26.536429] uhci_hcd 0000:00:10.1: irq 17, io base 0x0000e000
[ 26.536755] usb usb2: configuration #1 chosen from 1 choice
[ 26.536928] hub 2-0:1.0: USB hub found
[ 26.537047] hub 2-0:1.0: 2 ports detected
[ 26.639490] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 17
[ 26.639711] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 26.639900] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[ 26.640086] uhci_hcd 0000:00:10.2: irq 17, io base 0x0000e400
[ 26.640432] usb usb3: configuration #1 chosen from 1 choice
[ 26.640626] hub 3-0:1.0: USB hub found
[ 26.640743] hub 3-0:1.0: 2 ports detected
[ 26.655296] Switched to high resolution mode on CPU 0
[ 26.743156] ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 17
[ 26.743379] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 26.743547] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[ 26.743735] uhci_hcd 0000:00:10.3: irq 17, io base 0x0000e800
[ 26.744088] usb usb4: configuration #1 chosen from 1 choice
[ 26.744283] hub 4-0:1.0: USB hub found
[ 26.744400] hub 4-0:1.0: 2 ports detected
[ 26.813898] input: ImExPS/2 Logitech Explorer Mouse as /class/input/input1
[ 26.848563] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 17
[ 26.848791] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 26.848981] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
[ 26.849197] ehci_hcd 0000:00:10.4: irq 17, io mem 0xcffffd00
[ 26.849314] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 26.849665] usb usb5: configuration #1 chosen from 1 choice
[ 26.849827] hub 5-0:1.0: USB hub found
[ 26.849997] hub 5-0:1.0: 8 ports detected
[ 27.158838] kjournald starting. Commit interval 5 seconds
[ 27.158996] EXT3-fs: mounted filesystem with ordered data mode.
[ 35.835033] hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 35.835051] Uniform CD-ROM driver Revision: 3.20
[ 35.861074] r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
[ 35.861104] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 16 (level, low) -> IRQ 18
[ 35.861291] eth0: RTL8169s/8110s at 0xf8806f00, 00:11:09:d9:97:b2, IRQ 18
[ 35.890001] parport: PnPBIOS parport detected.
[ 35.890219] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 36.157882] nvidia: module license 'NVIDIA' taints kernel.
[ 36.409188] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 18
[ 36.409420] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-9631 Thu Nov 9 17:38:10 PST 2006
[ 36.467844] input: PC Speaker as /class/input/input2
[ 36.985986] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 19
[ 36.986172] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 41.535760] floppy0: no floppy controllers found
[ 41.562057] lp0: using parport0 (interrupt-driven).
[ 41.828480] input: Power Button (FF) as /class/input/input3
[ 41.841452] ACPI: Power Button (FF) [PWRF]
[ 41.852224] input: Power Button (CM) as /class/input/input4
[ 41.865199] ACPI: Power Button (CM) [PWRB]
[ 41.875937] input: Sleep Button (CM) as /class/input/input5
[ 41.888682] ACPI: Sleep Button (CM) [SLPB]
[ 41.901162] No dock devices found.
[ 41.912664] ibm_acpi: ec object not found
[ 42.520611] EXT3 FS on hda3, internal journal
[ 42.644071] kjournald starting. Commit interval 5 seconds
[ 42.644272] EXT3 FS on hda5, internal journal
[ 42.644280] EXT3-fs: mounted filesystem with ordered data mode.
[ 42.647271] kjournald starting. Commit interval 5 seconds
[ 42.647418] EXT3 FS on hda2, internal journal
[ 42.647425] EXT3-fs: mounted filesystem with ordered data mode.
[ 43.274376] Adding 1464836k swap on /dev/hda6. Priority:-1 extents:1 across:1464836k
[ 43.686588] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ processors (version 2.00.00)
[ 43.690186] powernow-k8: 0 : fid 0x2 (1000 MHz), vid 0x12
[ 43.690190] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x8
[ 43.690195] powernow-k8: 2 : fid 0xc (2000 MHz), vid 0x6
[ 89.323447] Time: acpi_pm clocksource has been installed.
[ 89.822999] Clocksource tsc unstable (delta = -250051675 ns)
[ 107.147024] Stopping tasks ... done.
[ 107.217374] Shrinking memory... -done (0 pages freed)
[ 107.240775] Freed 0 kbytes in 0.02 seconds (0.00 MB/s)
[ 107.240783] Suspending console(s)
[ 108.145319] pnp: Device 00:02 disabled.
[ 108.145818] pnp: Device 00:01 disabled.
[ 108.146724] ACPI: PCI interrupt for device 0000:00:11.5 disabled
[ 108.160786] ACPI: PCI interrupt for device 0000:00:10.4 disabled
[ 108.176729] ACPI: PCI interrupt for device 0000:00:10.3 disabled
[ 108.192712] ACPI: PCI interrupt for device 0000:00:10.2 disabled
[ 108.208696] ACPI: PCI interrupt for device 0000:00:10.1 disabled
[ 108.224680] ACPI: PCI interrupt for device 0000:00:10.0 disabled
[ 108.241268] lapic suspend on CPU#0
[ 108.241274] [<c01040fa>] show_trace_log_lvl+0x35/0x54
[ 108.241289] [<c010477c>] show_trace+0x2c/0x2e
[ 108.241299] [<c0104843>] dump_stack+0x29/0x2b
[ 108.241309] [<c011015b>] lapic_suspend+0xcf/0xf8
[ 108.241319] [<c026cf0d>] sysdev_suspend+0xad/0x216
[ 108.241331] [<c0271563>] device_power_down+0xb5/0xe2
[ 108.241340] [<c0142e5a>] swsusp_suspend+0x1e/0x6e
[ 108.241351] [<c014354a>] pm_suspend_disk+0x97/0x14d
[ 108.241361] [<c01422c8>] enter_state+0x58/0x161
[ 108.241371] [<c0142461>] state_store+0x90/0xa5
[ 108.241380] [<c01b3891>] subsys_attr_store+0x33/0x35
[ 108.241392] [<c01b3b74>] sysfs_write_file+0xba/0xdb
[ 108.241402] [<c01761b4>] vfs_write+0xce/0x1a6
[ 108.241412] [<c0176815>] sys_write+0x4c/0x70
[ 108.241421] [<c01030d7>] sysenter_past_esp+0x6c/0xad
[ 108.241430] =======================
[ 108.241446] swsusp: critical section:
[ 108.264597] swsusp: Need to copy 16708 pages
[ 57.589976] Intel machine check architecture supported.
[ 57.589989] Intel machine check reporting enabled on CPU#0.
[ 28.767086] lapic resume on CPU#0
[ 28.767089] [<c01040fa>] show_trace_log_lvl+0x35/0x54
[ 28.767097] [<c010477c>] show_trace+0x2c/0x2e
[ 28.767102] [<c0104843>] dump_stack+0x29/0x2b
[ 28.767107] [<c01101b8>] lapic_resume+0x34/0x1af
[ 28.767113] [<c026ca46>] __sysdev_resume+0x20/0x66
[ 28.767119] [<c026d098>] sysdev_resume+0x22/0x5e
[ 28.767124] [<c027187b>] device_power_up+0xd/0x14
[ 28.767129] [<c0142e9d>] swsusp_suspend+0x61/0x6e
[ 28.767134] [<c014354a>] pm_suspend_disk+0x97/0x14d
[ 28.767140] [<c01422c8>] enter_state+0x58/0x161
[ 28.767144] [<c0142461>] state_store+0x90/0xa5
[ 28.767149] [<c01b3891>] subsys_attr_store+0x33/0x35
[ 28.767155] [<c01b3b74>] sysfs_write_file+0xba/0xdb
[ 28.767161] [<c01761b4>] vfs_write+0xce/0x1a6
[ 28.767166] [<c0176815>] sys_write+0x4c/0x70
[ 28.767170] [<c01030d7>] sysenter_past_esp+0x6c/0xad
[ 28.767175] =======================
[ 96.970169] pci 0000:00:00.0: EARLY resume
[ 96.970173] pci 0000:00:00.1: EARLY resume
[ 96.970176] pci 0000:00:00.2: EARLY resume
[ 96.970180] pci 0000:00:00.3: EARLY resume
[ 96.970183] pci 0000:00:00.4: EARLY resume
[ 96.970186] pci 0000:00:00.7: EARLY resume
[ 96.970189] pci 0000:00:01.0: EARLY resume
[ 96.970192] r8169 0000:00:0b.0: EARLY resume
[ 96.970196] VIA_IDE 0000:00:0f.0: EARLY resume
[ 96.970199] uhci_hcd 0000:00:10.0: EARLY resume
[ 96.970203] uhci_hcd 0000:00:10.1: EARLY resume
[ 96.970206] uhci_hcd 0000:00:10.2: EARLY resume
[ 96.970209] uhci_hcd 0000:00:10.3: EARLY resume
[ 96.970213] ehci_hcd 0000:00:10.4: EARLY resume
[ 96.970216] pci 0000:00:11.0: EARLY resume
[ 96.970222] PCI: MSI-K8T-Neo2Fir, attempting to turn soundcard ON
[ 96.970228] PCI: MSI-K8T-Neo2Fir, soundcard on
[ 96.970233] VIA 82xx Audio 0000:00:11.5: EARLY resume
[ 96.970236] pci 0000:00:18.0: EARLY resume
[ 96.970240] pci 0000:00:18.1: EARLY resume
[ 96.970243] pci 0000:00:18.2: EARLY resume
[ 96.970246] k8temp 0000:00:18.3: EARLY resume
[ 96.970250] nvidia 0000:01:00.0: EARLY resume
[ 96.970254] pcspkr pcspkr: EARLY resume
[ 96.970257] platform vesafb.0: EARLY resume
[ 96.970264] serial8250 serial8250: EARLY resume
[ 96.970268] i8042 i8042: EARLY resume
[ 96.978026] acpi acpi: resuming
[ 96.978035] pci 0000:00:00.0: resuming
[ 96.978081] pci 0000:00:00.1: resuming
[ 96.978104] pci 0000:00:00.2: resuming
[ 96.978126] pci 0000:00:00.3: resuming
[ 96.978149] pci 0000:00:00.4: resuming
[ 96.978171] pci 0000:00:00.7: resuming
[ 96.978194] pci 0000:00:01.0: resuming
[ 96.978237] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 96.978242] r8169 0000:00:0b.0: resuming
[ 96.978246] VIA_IDE 0000:00:0f.0: resuming
[ 96.978293] ACPI: PCI Interrupt 0000:00:0f.0[A] -> GSI 20 (level, low) -> IRQ 16
[ 96.978300] uhci_hcd 0000:00:10.0: resuming
[ 96.989807] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 17
[ 96.989862] usb usb1: root hub lost power or was reset
[ 96.989875] uhci_hcd 0000:00:10.1: resuming
[ 97.005774] ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 17
[ 97.005827] usb usb2: root hub lost power or was reset
[ 97.005839] uhci_hcd 0000:00:10.2: resuming
[ 97.021742] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 17
[ 97.021795] usb usb3: root hub lost power or was reset
[ 97.021807] uhci_hcd 0000:00:10.3: resuming
[ 97.037710] ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 17
[ 97.037763] usb usb4: root hub lost power or was reset
[ 97.037776] ehci_hcd 0000:00:10.4: resuming
[ 97.053679] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 17
[ 97.053719] usb usb5: root hub lost power or was reset
[ 97.053735] pci 0000:00:11.0: resuming
[ 97.053770] VIA 82xx Audio 0000:00:11.5: resuming
[ 97.069678] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 19
[ 97.069687] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 97.072809] pci 0000:00:18.0: resuming
[ 97.072825] pci 0000:00:18.1: resuming
[ 97.072837] pci 0000:00:18.2: resuming
[ 97.072850] k8temp 0000:00:18.3: resuming
[ 97.072863] nvidia 0000:01:00.0: resuming
[ 97.073007] pnp 00:00: resuming
[ 97.073014] serial 00:01: resuming
[ 97.074378] pnp: Device 00:01 activated.
[ 97.074384] parport_pc 00:02: resuming
[ 97.076025] pnp: Device 00:02 activated.
[ 97.076029] system 00:03: resuming
[ 97.076032] pnp 00:04: resuming
[ 97.076034] pnp 00:05: resuming
[ 97.076037] pnp 00:06: resuming
[ 97.076040] pnp 00:07: resuming
[ 97.076043] i8042 aux 00:08: resuming
[ 97.076181] pnp: Failed to activate device 00:08.
[ 97.076185] i8042 kbd 00:09: resuming
[ 97.076199] pnp: Failed to activate device 00:09.
[ 97.076208] pcspkr pcspkr: resuming
[ 97.076212] platform vesafb.0: resuming
[ 97.076250] serial8250 serial8250: resuming
[ 97.076257] ide-disk 0.0: resuming
[ 97.129427] ide-cdrom 1.0: resuming
[ 97.131585] i8042 i8042: resuming
[ 97.131618] atkbd serio0: resuming
[ 97.164790] psmouse serio1: resuming
[ 97.345198] logips2pp: Detected unknown logitech mouse model 62
[ 97.848637] usb usb1: resuming
[ 97.888028] hub 1-0:1.0: resuming
[ 97.888032] usb usb2: resuming
[ 196.047736] hub 2-0:1.0: resuming
[ 196.047743] usb usb3: resuming
[ 196.087517] hub 3-0:1.0: resuming
[ 196.087524] usb usb4: resuming
[ 196.127477] hub 4-0:1.0: resuming
[ 196.127484] usb usb5: resuming
[ 196.159445] hub 5-0:1.0: resuming
[ 196.159464] ac97 0-0:ALC850: resuming
[ 196.159515] Restarting tasks ... done.
[ 286.477196] dbs_check_cpu: t310 < i311
[ 368.901522] uhci_hcd 0000:00:10.3: remove, state 1
[ 368.901534] usb usb4: USB disconnect, address 1
[ 368.905100] uhci_hcd 0000:00:10.3: USB bus 4 deregistered
[ 368.906081] ACPI: PCI interrupt for device 0000:00:10.3 disabled
[ 368.906109] uhci_hcd 0000:00:10.2: remove, state 1
[ 368.906119] usb usb3: USB disconnect, address 1
[ 368.909638] uhci_hcd 0000:00:10.2: USB bus 3 deregistered
[ 368.910592] ACPI: PCI interrupt for device 0000:00:10.2 disabled
[ 368.910620] uhci_hcd 0000:00:10.1: remove, state 1
[ 368.910629] usb usb2: USB disconnect, address 1
[ 368.914235] uhci_hcd 0000:00:10.1: USB bus 2 deregistered
[ 368.914334] ACPI: PCI interrupt for device 0000:00:10.1 disabled
[ 368.914361] uhci_hcd 0000:00:10.0: remove, state 1
[ 368.914369] usb usb1: USB disconnect, address 1
[ 368.915250] uhci_hcd 0000:00:10.0: USB bus 1 deregistered
[ 368.915333] ACPI: PCI interrupt for device 0000:00:10.0 disabled
[ 416.880815] r8169: eth0: link up
[ 227.932433] Stopping tasks ... done.
[ 227.933330] Shrinking memory... -done (0 pages freed)
[ 227.949058] Freed 0 kbytes in 0.01 seconds (0.00 MB/s)
[ 227.949063] Suspending console(s)
[ 228.840372] pnp: Device 00:02 disabled.
[ 228.840626] pnp: Device 00:01 disabled.
[ 228.841385] ACPI: PCI interrupt for device 0000:00:11.5 disabled
[ 228.854045] ACPI: PCI interrupt for device 0000:00:10.4 disabled
[ 228.886441] lapic suspend on CPU#0
[ 228.886445] [<c01040fa>] show_trace_log_lvl+0x35/0x54
[ 228.886453] [<c010477c>] show_trace+0x2c/0x2e
[ 228.886458] [<c0104843>] dump_stack+0x29/0x2b
[ 228.886463] [<c011015b>] lapic_suspend+0xcf/0xf8
[ 228.886469] [<c026cf0d>] sysdev_suspend+0xad/0x216
[ 228.886474] [<c0271563>] device_power_down+0xb5/0xe2
[ 228.886480] [<c0142e5a>] swsusp_suspend+0x1e/0x6e
[ 228.886485] [<c014354a>] pm_suspend_disk+0x97/0x14d
[ 228.886490] [<c01422c8>] enter_state+0x58/0x161
[ 228.886495] [<c0142461>] state_store+0x90/0xa5
[ 228.886499] [<c01b3891>] subsys_attr_store+0x33/0x35
[ 228.886505] [<c01b3b74>] sysfs_write_file+0xba/0xdb
[ 228.886511] [<c01761b4>] vfs_write+0xce/0x1a6
[ 228.886516] [<c0176815>] sys_write+0x4c/0x70
[ 228.886520] [<c01030d7>] sysenter_past_esp+0x6c/0xad
[ 228.886525] =======================
[ 228.886536] swsusp: critical section:
[ 228.902253] swsusp: Need to copy 19089 pages
[ 28.574318] Intel machine check architecture supported.
[ 28.574325] Intel machine check reporting enabled on CPU#0.
[ 28.574561] lapic resume on CPU#0
[ 28.574565] [<c01040fa>] show_trace_log_lvl+0x35/0x54
[ 28.574573] [<c010477c>] show_trace+0x2c/0x2e
[ 28.574578] [<c0104843>] dump_stack+0x29/0x2b
[ 28.574583] [<c01101b8>] lapic_resume+0x34/0x1af
[ 28.574589] [<c026ca46>] __sysdev_resume+0x20/0x66
[ 28.574595] [<c026d098>] sysdev_resume+0x22/0x5e
[ 28.574600] [<c027187b>] device_power_up+0xd/0x14
[ 28.574605] [<c0142e9d>] swsusp_suspend+0x61/0x6e
[ 28.574610] [<c014354a>] pm_suspend_disk+0x97/0x14d
[ 28.574615] [<c01422c8>] enter_state+0x58/0x161
[ 28.574620] [<c0142461>] state_store+0x90/0xa5
[ 28.574625] [<c01b3891>] subsys_attr_store+0x33/0x35
[ 28.574631] [<c01b3b74>] sysfs_write_file+0xba/0xdb
[ 28.574637] [<c01761b4>] vfs_write+0xce/0x1a6
[ 28.574642] [<c0176815>] sys_write+0x4c/0x70
[ 28.574647] [<c01030d7>] sysenter_past_esp+0x6c/0xad
[ 28.574651] =======================
[ 90.251248] pci 0000:00:00.0: EARLY resume
[ 90.251252] pci 0000:00:00.1: EARLY resume
[ 90.251255] pci 0000:00:00.2: EARLY resume
[ 90.251258] pci 0000:00:00.3: EARLY resume
[ 90.251261] pci 0000:00:00.4: EARLY resume
[ 90.251265] pci 0000:00:00.7: EARLY resume
[ 90.251268] pci 0000:00:01.0: EARLY resume
[ 90.251271] r8169 0000:00:0b.0: EARLY resume
[ 90.251274] VIA_IDE 0000:00:0f.0: EARLY resume
[ 90.251278] pci 0000:00:10.0: EARLY resume
[ 90.251281] pci 0000:00:10.1: EARLY resume
[ 90.251284] pci 0000:00:10.2: EARLY resume
[ 90.251287] pci 0000:00:10.3: EARLY resume
[ 90.251291] ehci_hcd 0000:00:10.4: EARLY resume
[ 90.251294] pci 0000:00:11.0: EARLY resume
[ 90.251300] PCI: MSI-K8T-Neo2Fir, attempting to turn soundcard ON
[ 90.251306] PCI: MSI-K8T-Neo2Fir, soundcard on
[ 90.251311] VIA 82xx Audio 0000:00:11.5: EARLY resume
[ 90.251315] pci 0000:00:18.0: EARLY resume
[ 90.251318] pci 0000:00:18.1: EARLY resume
[ 90.251321] pci 0000:00:18.2: EARLY resume
[ 90.251324] k8temp 0000:00:18.3: EARLY resume
[ 90.251328] nvidia 0000:01:00.0: EARLY resume
[ 90.251332] pcspkr pcspkr: EARLY resume
[ 90.251335] platform vesafb.0: EARLY resume
[ 90.251342] serial8250 serial8250: EARLY resume
[ 90.251346] i8042 i8042: EARLY resume
[ 90.259839] acpi acpi: resuming
[ 90.259848] pci 0000:00:00.0: resuming
[ 90.259899] pci 0000:00:00.1: resuming
[ 90.259922] pci 0000:00:00.2: resuming
[ 90.259944] pci 0000:00:00.3: resuming
[ 90.259967] pci 0000:00:00.4: resuming
[ 90.259989] pci 0000:00:00.7: resuming
[ 90.260012] pci 0000:00:01.0: resuming
[ 90.260054] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 90.260060] r8169 0000:00:0b.0: resuming
[ 90.271012] VIA_IDE 0000:00:0f.0: resuming
[ 90.271061] ACPI: PCI Interrupt 0000:00:0f.0[A] -> GSI 20 (level, low) -> IRQ 16
[ 90.271067] pci 0000:00:10.0: resuming
[ 90.271094] PM: Writing back config space on device 0000:00:10.0 at offset 1 (was 2100017, writing 2100013)
[ 90.271107] pci 0000:00:10.1: resuming
[ 90.271134] PM: Writing back config space on device 0000:00:10.1 at offset 1 (was 2100017, writing 2100013)
[ 90.271147] pci 0000:00:10.2: resuming
[ 90.271173] PM: Writing back config space on device 0000:00:10.2 at offset 1 (was 2100017, writing 2100013)
[ 90.271186] pci 0000:00:10.3: resuming
[ 90.271212] PM: Writing back config space on device 0000:00:10.3 at offset 1 (was 2100017, writing 2100013)
[ 90.271225] ehci_hcd 0000:00:10.4: resuming
[ 90.286985] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 17
[ 90.287026] usb usb5: root hub lost power or was reset
[ 90.287043] pci 0000:00:11.0: resuming
[ 90.287078] VIA 82xx Audio 0000:00:11.5: resuming
[ 90.302943] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 19
[ 90.302953] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 90.306052] pci 0000:00:18.0: resuming
[ 90.306068] pci 0000:00:18.1: resuming
[ 90.306080] pci 0000:00:18.2: resuming
[ 90.306093] k8temp 0000:00:18.3: resuming
[ 90.306106] nvidia 0000:01:00.0: resuming
[ 90.306245] pnp 00:00: resuming
[ 90.306251] serial 00:01: resuming
[ 90.307641] pnp: Device 00:01 activated.
[ 90.307647] parport_pc 00:02: resuming
[ 90.309271] pnp: Device 00:02 activated.
[ 90.309275] system 00:03: resuming
[ 90.309278] pnp 00:04: resuming
[ 90.309281] pnp 00:05: resuming
[ 90.309284] pnp 00:06: resuming
[ 90.309287] pnp 00:07: resuming
[ 90.309290] i8042 aux 00:08: resuming
[ 90.309426] pnp: Failed to activate device 00:08.
[ 90.309430] i8042 kbd 00:09: resuming
[ 90.309445] pnp: Failed to activate device 00:09.
[ 90.309454] pcspkr pcspkr: resuming
[ 90.309457] platform vesafb.0: resuming
[ 90.309496] serial8250 serial8250: resuming
[ 90.309503] ide-disk 0.0: resuming
[ 90.356307] ide-cdrom 1.0: resuming
[ 90.358458] i8042 i8042: resuming
[ 90.358491] atkbd serio0: resuming
[ 90.391693] psmouse serio1: resuming
[ 90.573192] logips2pp: Detected unknown logitech mouse model 62
[ 91.075384] usb usb5: resuming
[ 91.105324] hub 5-0:1.0: resuming
[ 91.105334] ac97 0-0:ALC850: resuming
[ 91.764195] Restarting tasks ... done.
[ 184.374518] input: Power Button (FF) as /class/input/input6
[ 184.380803] ACPI: Power Button (FF) [PWRF]
[ 184.401383] input: Power Button (CM) as /class/input/input7
[ 184.426364] ACPI: Power Button (CM) [PWRB]
[ 184.427403] input: Sleep Button (CM) as /class/input/input8
[ 184.447937] ACPI: Sleep Button (CM) [SLPB]
[ 405.243424] Stopping tasks ... done.
[ 405.244559] Shrinking memory... -done (0 pages freed)
[ 405.267891] Freed 0 kbytes in 0.02 seconds (0.00 MB/s)
[ 405.267899] Suspending console(s)
[ 406.076633] pnp: Device 00:02 disabled.
[ 406.077139] pnp: Device 00:01 disabled.
[ 406.078087] ACPI: PCI interrupt for device 0000:00:11.5 disabled
[ 406.089520] ACPI: PCI interrupt for device 0000:00:10.4 disabled
[ 406.121988] lapic suspend on CPU#0
[ 406.121995] [<c01040fa>] show_trace_log_lvl+0x35/0x54
[ 406.122009] [<c010477c>] show_trace+0x2c/0x2e
[ 406.122019] [<c0104843>] dump_stack+0x29/0x2b
[ 406.122029] [<c011015b>] lapic_suspend+0xcf/0xf8
[ 406.122040] [<c026cf0d>] sysdev_suspend+0xad/0x216
[ 406.122051] [<c0271563>] device_power_down+0xb5/0xe2
[ 406.122060] [<c0142e5a>] swsusp_suspend+0x1e/0x6e
[ 406.122071] [<c014354a>] pm_suspend_disk+0x97/0x14d
[ 406.122081] [<c01422c8>] enter_state+0x58/0x161
[ 406.122090] [<c0142461>] state_store+0x90/0xa5
[ 406.122099] [<c01b3891>] subsys_attr_store+0x33/0x35
[ 406.122111] [<c01b3b74>] sysfs_write_file+0xba/0xdb
[ 406.122121] [<c01761b4>] vfs_write+0xce/0x1a6
[ 406.122131] [<c0176815>] sys_write+0x4c/0x70
[ 406.122140] [<c01030d7>] sysenter_past_esp+0x6c/0xad
[ 406.122149] =======================
[ 406.122164] swsusp: critical section:
[ 406.145294] swsusp: Need to copy 19231 pages
[ 58.244141] Intel machine check architecture supported.
[ 58.244155] Intel machine check reporting enabled on CPU#0.
[ 29.093849] lapic resume on CPU#0
[ 29.093853] [<c01040fa>] show_trace_log_lvl+0x35/0x54
[ 29.093861] [<c010477c>] show_trace+0x2c/0x2e
[ 29.093865] [<c0104843>] dump_stack+0x29/0x2b
[ 29.093870] [<c01101b8>] lapic_resume+0x34/0x1af
[ 29.093876] [<c026ca46>] __sysdev_resume+0x20/0x66
[ 29.093882] [<c026d098>] sysdev_resume+0x22/0x5e
[ 29.093887] [<c027187b>] device_power_up+0xd/0x14
[ 29.093892] [<c0142e9d>] swsusp_suspend+0x61/0x6e
[ 29.093897] [<c014354a>] pm_suspend_disk+0x97/0x14d
[ 29.093902] [<c01422c8>] enter_state+0x58/0x161
[ 29.093907] [<c0142461>] state_store+0x90/0xa5
[ 29.093912] [<c01b3891>] subsys_attr_store+0x33/0x35
[ 29.093918] [<c01b3b74>] sysfs_write_file+0xba/0xdb
[ 29.093923] [<c01761b4>] vfs_write+0xce/0x1a6
[ 29.093928] [<c0176815>] sys_write+0x4c/0x70
[ 29.093933] [<c01030d7>] sysenter_past_esp+0x6c/0xad
[ 29.093937] =======================
[ 65.934039] pci 0000:00:00.0: EARLY resume
[ 65.934044] pci 0000:00:00.1: EARLY resume
[ 65.934047] pci 0000:00:00.2: EARLY resume
[ 65.934050] pci 0000:00:00.3: EARLY resume
[ 65.934053] pci 0000:00:00.4: EARLY resume
[ 65.934056] pci 0000:00:00.7: EARLY resume
[ 65.934059] pci 0000:00:01.0: EARLY resume
[ 65.934063] r8169 0000:00:0b.0: EARLY resume
[ 65.934066] VIA_IDE 0000:00:0f.0: EARLY resume
[ 65.934069] pci 0000:00:10.0: EARLY resume
[ 65.934073] pci 0000:00:10.1: EARLY resume
[ 65.934076] pci 0000:00:10.2: EARLY resume
[ 65.934079] pci 0000:00:10.3: EARLY resume
[ 65.934082] ehci_hcd 0000:00:10.4: EARLY resume
[ 65.934086] pci 0000:00:11.0: EARLY resume
[ 65.934091] PCI: MSI-K8T-Neo2Fir, attempting to turn soundcard ON
[ 65.934097] PCI: MSI-K8T-Neo2Fir, soundcard on
[ 65.934102] VIA 82xx Audio 0000:00:11.5: EARLY resume
[ 65.934106] pci 0000:00:18.0: EARLY resume
[ 65.934109] pci 0000:00:18.1: EARLY resume
[ 65.934112] pci 0000:00:18.2: EARLY resume
[ 65.934115] k8temp 0000:00:18.3: EARLY resume
[ 65.934119] nvidia 0000:01:00.0: EARLY resume
[ 65.934124] pcspkr pcspkr: EARLY resume
[ 65.934127] platform vesafb.0: EARLY resume
[ 65.934134] serial8250 serial8250: EARLY resume
[ 65.934137] i8042 i8042: EARLY resume
[ 65.942628] acpi acpi: resuming
[ 65.942638] pci 0000:00:00.0: resuming
[ 65.942685] pci 0000:00:00.1: resuming
[ 65.942708] pci 0000:00:00.2: resuming
[ 65.942731] pci 0000:00:00.3: resuming
[ 65.942753] pci 0000:00:00.4: resuming
[ 65.942776] pci 0000:00:00.7: resuming
[ 65.942798] pci 0000:00:01.0: resuming
[ 65.942841] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 65.942846] r8169 0000:00:0b.0: resuming
[ 65.952005] VIA_IDE 0000:00:0f.0: resuming
[ 65.952054] ACPI: PCI Interrupt 0000:00:0f.0[A] -> GSI 20 (level, low) -> IRQ 16
[ 65.952060] pci 0000:00:10.0: resuming
[ 65.952087] PM: Writing back config space on device 0000:00:10.0 at offset 1 (was 2100017, writing 2100013)
[ 65.952101] pci 0000:00:10.1: resuming
[ 65.952127] PM: Writing back config space on device 0000:00:10.1 at offset 1 (was 2100017, writing 2100013)
[ 65.952140] pci 0000:00:10.2: resuming
[ 65.952166] PM: Writing back config space on device 0000:00:10.2 at offset 1 (was 2100017, writing 2100013)
[ 65.952179] pci 0000:00:10.3: resuming
[ 65.952206] PM: Writing back config space on device 0000:00:10.3 at offset 1 (was 2100017, writing 2100013)
[ 65.952219] ehci_hcd 0000:00:10.4: resuming
[ 65.967977] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 17
[ 65.968017] usb usb5: root hub lost power or was reset
[ 65.968034] pci 0000:00:11.0: resuming
[ 65.968068] VIA 82xx Audio 0000:00:11.5: resuming
[ 65.983936] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 19
[ 65.983945] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 65.987043] pci 0000:00:18.0: resuming
[ 65.987058] pci 0000:00:18.1: resuming
[ 65.987071] pci 0000:00:18.2: resuming
[ 65.987084] k8temp 0000:00:18.3: resuming
[ 65.987097] nvidia 0000:01:00.0: resuming
[ 65.987237] pnp 00:00: resuming
[ 65.987244] serial 00:01: resuming
[ 65.988604] pnp: Device 00:01 activated.
[ 65.988610] parport_pc 00:02: resuming
[ 65.990224] pnp: Device 00:02 activated.
[ 65.990227] system 00:03: resuming
[ 65.990230] pnp 00:04: resuming
[ 65.990233] pnp 00:05: resuming
[ 65.990236] pnp 00:06: resuming
[ 65.990239] pnp 00:07: resuming
[ 65.990242] i8042 aux 00:08: resuming
[ 65.990379] pnp: Failed to activate device 00:08.
[ 65.990383] i8042 kbd 00:09: resuming
[ 65.990398] pnp: Failed to activate device 00:09.
[ 65.990407] pcspkr pcspkr: resuming
[ 65.990410] platform vesafb.0: resuming
[ 65.990449] serial8250 serial8250: resuming
[ 65.990456] ide-disk 0.0: resuming
[ 66.040883] ide-cdrom 1.0: resuming
[ 66.043032] i8042 i8042: resuming
[ 66.043065] atkbd serio0: resuming
[ 66.075682] psmouse serio1: resuming
[ 66.253841] logips2pp: Detected unknown logitech mouse model 62
[ 133.359431] usb usb5: resuming
[ 133.391673] hub 5-0:1.0: resuming
[ 133.391692] ac97 0-0:ALC850: resuming
[ 133.391739] Restarting tasks ... done.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
