Re: Running Linux on FPGA

["Kevin D. Kissell" <kevink@mips.com>]

> > The overhead of timer interrupts at this low clockrate is significant
> > so I recommend to minimize the timer interrupt rate as far as possible.
> > This is really a tradeoff between latency and overhead and matters
> > much less on hardcores which run at hundreds of MHz.  For power sensitive
> > applications lowering the interrupt rate can also help.  And that's alredy
> > pretty much what you need to know, that is a 10ms  timer is fine.
> >
> 
> I have worked with FPGA Linux system which is reconfigurable
> on-the-fly by the 200Mhz ARM9 CPU running Debian Linux, Altera Cyclone
> II FPGA is included on my TS-7300 board. Advantage is, Altera FPGA and
> a dedicated high-speed bus between the CPU and FPGA provides a good
> design scope to provide many solutions.

What's your point here?  A 200MHz hard ore won't see the issues 
under discussion.  We're talking about systems where the CPU itself
is "soft" and implemented in an FPGA.

            Regards,

            Kevin K.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/