Remove Kconfig entries (and some documentation) for apparently
"dead" config variables.
Signed-off-by: Robert P. J. Day <[email protected]>
---
A script I threw together identified the following as apparently
useless config variables. By "useless," I mean that they:
1) aren't consulted by any Makefile
2) aren't checked by any source or header file
3) don't further select any Kconfig settings
etc. In short, they don't seem to be able to affect the build in any
way.
The variables that are being removed:
USB_SERIAL_SAFE_PADDED
AEDSP16_MPU401
X86_XADD
PARIDE_PARPORT
AIC7XXX_PROBE_EISA_VL
AIC79XX_ENABLE_RD_STRM
SCSI_NCR53C8XX_PROFILE
53C700_IO_MAPPED
ZISOFS_FS
DLCI_COUNT
MOUSE_ATIXL
LCD_DEVICE
The removal was compile tested based on "make allyesconfig". If any
of these variables are still being used in some way, they are keeping
it very well hidden.
Documentation/scsi/ncr53c8xx.txt | 5 -----
arch/arm/configs/pnx4008_defconfig | 1 -
arch/i386/Kconfig.cpu | 5 -----
arch/um/config.release | 1 -
drivers/block/paride/Kconfig | 8 +-------
drivers/input/mouse/Kconfig | 6 ------
drivers/net/wan/Kconfig | 11 -----------
drivers/scsi/Kconfig | 16 ----------------
drivers/scsi/aic7xxx/Kconfig.aic79xx | 12 ------------
drivers/scsi/aic7xxx/Kconfig.aic7xxx | 10 ----------
drivers/usb/serial/Kconfig | 4 ----
drivers/video/backlight/Kconfig | 5 -----
fs/Kconfig | 6 ------
sound/oss/Kconfig | 12 ------------
14 files changed, 1 insertion(+), 101 deletions(-)
diff --git a/Documentation/scsi/ncr53c8xx.txt b/Documentation/scsi/ncr53c8xx.txt
index caf10b1..88ef88b 100644
--- a/Documentation/scsi/ncr53c8xx.txt
+++ b/Documentation/scsi/ncr53c8xx.txt
@@ -562,11 +562,6 @@ if only one has a flaw for some SCSI feature, you can disable the
support by the driver of this feature at linux start-up and enable
this feature after boot-up only for devices that support it safely.
-CONFIG_SCSI_NCR53C8XX_PROFILE_SUPPORT (default answer: n)
- This option must be set for profiling information to be gathered
- and printed out through the proc file system. This features may
- impact performances.
-
CONFIG_SCSI_NCR53C8XX_IOMAPPED (default answer: n)
Answer "y" if you suspect your mother board to not allow memory mapped I/O.
May slow down performance a little. This option is required by
diff --git a/arch/arm/configs/pnx4008_defconfig b/arch/arm/configs/pnx4008_defconfig
index b5e11aa..268b292 100644
--- a/arch/arm/configs/pnx4008_defconfig
+++ b/arch/arm/configs/pnx4008_defconfig
@@ -1395,7 +1395,6 @@ CONFIG_AUTOFS4_FS=m
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
diff --git a/arch/i386/Kconfig.cpu b/arch/i386/Kconfig.cpu
index 2aecfba..b99c0e2 100644
--- a/arch/i386/Kconfig.cpu
+++ b/arch/i386/Kconfig.cpu
@@ -226,11 +226,6 @@ config X86_CMPXCHG
depends on !M386
default y
-config X86_XADD
- bool
- depends on !M386
- default y
-
config X86_L1_CACHE_SHIFT
int
default "7" if MPENTIUM4 || X86_GENERIC
diff --git a/arch/um/config.release b/arch/um/config.release
index fc68bcb..861b59b 100644
--- a/arch/um/config.release
+++ b/arch/um/config.release
@@ -253,7 +253,6 @@ CONFIG_LOCKD_V4=y
# CONFIG_NCPFS_SMALLDOS is not set
# CONFIG_NCPFS_NLS is not set
# CONFIG_NCPFS_EXTRAS is not set
-# CONFIG_ZISOFS_FS is not set
CONFIG_ZLIB_FS_INFLATE=m
#
diff --git a/drivers/block/paride/Kconfig b/drivers/block/paride/Kconfig
index c0d2854..28cf308 100644
--- a/drivers/block/paride/Kconfig
+++ b/drivers/block/paride/Kconfig
@@ -2,14 +2,8 @@
# PARIDE configuration
#
# PARIDE doesn't need PARPORT, but if PARPORT is configured as a module,
-# PARIDE must also be a module. The bogus CONFIG_PARIDE_PARPORT option
-# controls the choices given to the user ...
+# PARIDE must also be a module.
# PARIDE only supports PC style parports. Tough for USB or other parports...
-config PARIDE_PARPORT
- tristate
- depends on PARIDE!=n
- default m if PARPORT_PC=m
- default y if PARPORT_PC!=m
comment "Parallel IDE high-level drivers"
depends on PARIDE
diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig
index 35d998c..0befb49 100644
--- a/drivers/input/mouse/Kconfig
+++ b/drivers/input/mouse/Kconfig
@@ -60,12 +60,6 @@ config MOUSE_INPORT
To compile this driver as a module, choose M here: the
module will be called inport.
-config MOUSE_ATIXL
- bool "ATI XL variant"
- depends on MOUSE_INPORT
- help
- Say Y here if your mouse is of the ATI XL variety.
-
config MOUSE_LOGIBM
tristate "Logitech busmouse"
depends on ISA
diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
index 21f76f5..b550b51 100644
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -344,17 +344,6 @@ config DLCI
To compile this driver as a module, choose M here: the
module will be called dlci.
-config DLCI_COUNT
- int "Max open DLCI"
- depends on DLCI
- default "24"
- help
- Maximal number of logical point-to-point frame relay connections
- (the identifiers of which are called DCLIs) that the driver can
- handle.
-
- The default is probably fine.
-
config DLCI_MAX
int "Max DLCI per device"
depends on DLCI
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 60f5827..043a4af 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -1184,17 +1184,6 @@ config SCSI_NCR53C8XX_SYNC
There is no safe option other than using good cabling, right
terminations and SCSI conformant devices.
-config SCSI_NCR53C8XX_PROFILE
- bool "enable profiling"
- depends on SCSI_ZALON || SCSI_NCR_Q720
- help
- This option allows you to enable profiling information gathering.
- These statistics are not very accurate due to the low frequency
- of the kernel clock (100 Hz on i386) and have performance impact
- on systems that use very fast devices.
-
- The normal answer therefore is N.
-
config SCSI_NCR53C8XX_NO_DISCONNECT
bool "not allow targets to disconnect"
depends on (SCSI_ZALON || SCSI_NCR_Q720) && SCSI_NCR53C8XX_DEFAULT_TAGS=0
@@ -1324,11 +1313,6 @@ config SCSI_SIM710
It currently supports Compaq EISA cards and NCR MCA cards
-config 53C700_IO_MAPPED
- bool
- depends on SCSI_SIM710
- default y
-
config SCSI_SYM53C416
tristate "Symbios 53c416 SCSI support"
depends on ISA && SCSI
diff --git a/drivers/scsi/aic7xxx/Kconfig.aic79xx b/drivers/scsi/aic7xxx/Kconfig.aic79xx
index 911ea17..5e6620f 100644
--- a/drivers/scsi/aic7xxx/Kconfig.aic79xx
+++ b/drivers/scsi/aic7xxx/Kconfig.aic79xx
@@ -57,18 +57,6 @@ config AIC79XX_BUILD_FIRMWARE
or modify the assembler Makefile or the files it includes if your
build environment is different than that of the author.
-config AIC79XX_ENABLE_RD_STRM
- bool "Enable Read Streaming for All Targets"
- depends on SCSI_AIC79XX
- default n
- help
- Read Streaming is a U320 protocol option that should enhance
- performance. Early U320 drive firmware actually performs slower
- with read streaming enabled so it is disabled by default. Read
- Streaming can be configured in much the same way as tagged queueing
- using the "rd_strm" command line option. See
- drivers/scsi/aic7xxx/README.aic79xx for details.
-
config AIC79XX_DEBUG_ENABLE
bool "Compile in Debugging Code"
depends on SCSI_AIC79XX
diff --git a/drivers/scsi/aic7xxx/Kconfig.aic7xxx b/drivers/scsi/aic7xxx/Kconfig.aic7xxx
index cd93f9a..88da670 100644
--- a/drivers/scsi/aic7xxx/Kconfig.aic7xxx
+++ b/drivers/scsi/aic7xxx/Kconfig.aic7xxx
@@ -50,16 +50,6 @@ config AIC7XXX_RESET_DELAY_MS
Default: 5000 (5 seconds)
-config AIC7XXX_PROBE_EISA_VL
- bool "Probe for EISA and VL AIC7XXX Adapters"
- depends on SCSI_AIC7XXX && EISA
- help
- Probe for EISA and VLB Aic7xxx controllers. In many newer systems,
- the invasive probes necessary to detect these controllers can cause
- other devices to fail. For this reason, the non-PCI probe code is
- disabled by default. The current value of this option can be "toggled"
- via the no_probe kernel command line option.
-
config AIC7XXX_BUILD_FIRMWARE
bool "Build Adapter Firmware with Kernel Build"
depends on SCSI_AIC7XXX && !PREVENT_FIRMWARE_BUILD
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index 2f4d303..76b2d7b 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -477,10 +477,6 @@ config USB_SERIAL_SAFE
tristate "USB Safe Serial (Encapsulated) Driver (EXPERIMENTAL)"
depends on USB_SERIAL && EXPERIMENTAL
-config USB_SERIAL_SAFE_PADDED
- bool "USB Secure Encapsulated Driver - Padded"
- depends on USB_SERIAL_SAFE
-
config USB_SERIAL_SIERRAWIRELESS
tristate "USB Sierra Wireless Driver"
depends on USB_SERIAL
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index 02f1529..c406f58 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -37,11 +37,6 @@ config LCD_CLASS_DEVICE
To have support for your specific LCD panel you will have to
select the proper drivers which depend on this option.
-config LCD_DEVICE
- bool
- depends on LCD_CLASS_DEVICE
- default y
-
config BACKLIGHT_CORGI
tristate "Sharp Corgi Backlight Driver (SL Series)"
depends on BACKLIGHT_DEVICE && PXA_SHARPSL
diff --git a/fs/Kconfig b/fs/Kconfig
index 8cd2417..5fb82af 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -675,12 +675,6 @@ config ZISOFS
necessary to create such a filesystem. Say Y here if you want to be
able to read such compressed CD-ROMs.
-config ZISOFS_FS
-# for fs/nls/Config.in
- tristate
- depends on ZISOFS
- default ISO9660_FS
-
config UDF_FS
tristate "UDF file system support"
help
diff --git a/sound/oss/Kconfig b/sound/oss/Kconfig
index a0588c2..18ef936 100644
--- a/sound/oss/Kconfig
+++ b/sound/oss/Kconfig
@@ -705,18 +705,6 @@ config AEDSP16_SBPRO
endchoice
-config AEDSP16_MPU401
- bool "Audio Excel DSP 16 (MPU401 emulation)"
- depends on SOUND_AEDSP16 && SOUND_MPU401
- help
- Answer Y if you want your audio card to emulate the MPU-401 midi
- interface. You should then also say Y to "MPU-401 support".
-
- Note that the I/O base for MPU-401 support of aedsp16 is the same
- you have selected for "MPU-401 support". If you are using this
- driver as a module you have to specify the MPU I/O base address with
- the parameter 'mpu_base=0xNNN'.
-
config SOUND_VIDC
tristate "VIDC 16-bit sound"
depends on ARM && (ARCH_ACORN || ARCH_CLPS7500) && SOUND_OSS
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
