I did a build with a lightly modified defconfig, and installed. On first boot test the system looped complaining about the nbd and listing manyerrors I couldn't capture regarding nbd5-nbd0. Hardware description is in the lshw file.
I took out nbd for the moment, and reinstalled. That gave warnings about
fd0 sector 0 errors, but eventually booted. That kernel seems to run
reasonably well, dmesg also attached, with the config file from /proc.
I downloaded kvm-10 and built that. It did not correctly handle
"../linux-2.6.20-rc4" as the kernel tree, it seemed to strip the leading
".." from the name. I reconfigured and installed using a full tree path.
On trying to install a test of Win98SE, qemu got to the surface scan
(last item of the install) and ended with:
exception 13 (0)
Aborted
I used no-acpi and tried with and without win2k-hack option. Since the
kernel has recent KVM patches I didn't build the module (used
--with-patched-kernel). I later tried building the kvm module, but that
doesn't load with this kernel.
System is historically stable, and I ran memtest for 12hr about a week ago, so I have no reason to suspect a memory problem. Memory and CPU arenot overclocked, CPU and case temps are good, I doubt this is hardware, VMware with WinXP was tested by someone else on this system.
Attached: config, cpuinfo, dmesg, hardware scan, and a copy of the error. Two problems: - kvm will not run anything in VM, probably some config or FC6 issue. I did try with selinux in advisory mode, but I don't want to run with it off. - system with nbd configured will not boot (and doesn't write log file) I could belive that's lightly tested. -- Bill Davidsen He was a full-time professional cat, not some moonlighting ferret or weasel. He knew about these things.
Attachment:
config.gz
Description: GNU Zip compressed data
processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping : 6 cpu MHz : 1596.000 cache size : 4096 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr lahf_lm bogomips : 4789.81 clflush size : 64 processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping : 6 cpu MHz : 1596.000 cache size : 4096 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr lahf_lm bogomips : 4787.22 clflush size : 64
Linux version 2.6.20-rc4-git1 ([email protected]) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Fri Jan 12 11:52:28 EST 2007 BIOS-provided physical RAM map: sanitize start sanitize end copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2 copy_e820_map() start: 00000000000e4000 size: 000000000001c000 end: 0000000000100000 type: 2 copy_e820_map() start: 0000000000100000 size: 000000007f6a0000 end: 000000007f7a0000 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000007f7a0000 size: 000000000000e000 end: 000000007f7ae000 type: 3 copy_e820_map() start: 000000007f7ae000 size: 0000000000032000 end: 000000007f7e0000 type: 4 copy_e820_map() start: 000000007f7e0000 size: 0000000000020000 end: 000000007f800000 type: 2 copy_e820_map() start: 00000000ffb80000 size: 0000000000480000 end: 0000000100000000 type: 2 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007f7a0000 (usable) BIOS-e820: 000000007f7a0000 - 000000007f7ae000 (ACPI data) BIOS-e820: 000000007f7ae000 - 000000007f7e0000 (ACPI NVS) BIOS-e820: 000000007f7e0000 - 000000007f800000 (reserved) BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) 1143MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000ff780 Entering add_active_range(0, 0, 522144) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 522144 early_node_map[1] active PFN ranges 0: 0 -> 522144 On node 0 totalpages: 522144 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 2287 pages used for memmap HighMem zone: 290481 pages, LIFO batch:31 DMI 2.4 present. ACPI: RSDP (v002 ACPIAM ) @ 0x000fa5d0 ACPI: XSDT (v001 A M I OEMXSDT 0x10000627 MSFT 0x00000097) @ 0x7f7a0100 ACPI: FADT (v003 A M I OEMFACP 0x10000627 MSFT 0x00000097) @ 0x7f7a0290 ACPI: MADT (v001 A M I OEMAPIC 0x10000627 MSFT 0x00000097) @ 0x7f7a0390 ACPI: OEMB (v001 A M I AMI_OEM 0x10000627 MSFT 0x00000097) @ 0x7f7ae040 ACPI: MCFG (v001 A M I OEMMCFG 0x10000627 MSFT 0x00000097) @ 0x7f7a4f00 ACPI: DSDT (v001 A0281 A0281074 0x00000074 INTL 0x02002026) @ 0x00000000 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 6:15 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 6:15 APIC version 20 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 80000000 (gap: 7f800000:80380000) Detected 2394.110 MHz processor. Built 1 zonelists. Total pages: 518065 Kernel command line: ro root=/dev/VG01/Root32 rhgb mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 2061264k/2088576k available (4112k kernel code, 26120k reserved, 1852k data, 324k init, 1171072k highmem) virtual kernel memory layout: fixmap : 0xffe17000 - 0xfffff000 (1952 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc06db000 - 0xc072c000 ( 324 kB) .data : 0xc05040f5 - 0xc06d332c (1852 kB) .text : 0xc0100000 - 0xc05040f5 (4112 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 4789.81 BogoMIPS (lpj=2394906) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 monitor/mwait feature present. using mwait in idle threads. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Checking 'hlt' instruction... OK. Freeing SMP alternatives: 18k freed ACPI: Core revision 20060707 tbxface-0107 [01] load_tables : ACPI Tables successfully acquired Parsing all Control Methods: Table [DSDT](id 0005) - 691 Objects with 54 Devices 195 Methods 25 Regions ACPI Namespace successfully loaded at root c078c590 evxfevnt-0089 [02] enable : Transition to ACPI mode successful CPU0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06 Booting processor 1/1 eip 2000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4787.22 BogoMIPS (lpj=2393612) CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 monitor/mwait feature present. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06 Total of 2 processors activated (9577.03 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs migration_cost=110 Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=3 PCI: Using configuration type 1 Setting up standard PCI resources evgpeblk-0951 [04] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9 evgpeblk-1048 [03] ev_initialize_gpe_bloc: Found 11 Wake, Enabled 0 Runtime GPEs in this block Completing Region/Field/Buffer/Package initialization:.................................................................................................................... Initialized 24/25 Regions 23/23 Fields 36/36 Buffers 33/34 Packages (700 nodes) Initializing Device/Processor/Thermal objects by executing _INI methods:. Executed 1 _INI methods requiring 0 _STA executions (examined 60 objects) ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:00:02.0 PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 0480-04bf claimed by ICH6 GPIO PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. intel_rng: FWH not detected SCSI subsystem initialized libata version 2.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 PCI: Bridge: 0000:00:1c.0 IO window: e000-efff MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.1 IO window: d000-dfff MEM window: cff00000-cfffffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: b000-cfff MEM window: cfe00000-cfefffff PREFETCH window: 80000000-800fffff ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.1 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 1939k freed IA-32 Microcode Update Driver: v1.14a <[email protected]> audit: initializing netlink socket (disabled) audit(1168621038.096:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 Installing knfsd (copyright (C) 1996 [email protected]). NTFS driver 2.1.27 [Flags: R/O]. SELinux: Registering netfilter hooks io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered vga16fb: initializing vga16fb: mapped to 0xc00a0000 fb0: VGA16 VGA frame buffer device input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input1 ACPI: Power Button (CM) [PWRB] Parsing all Control Methods: Table [SSDT](id 00C5) - 10 Objects with 0 Devices 4 Methods 0 Regions ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ AMI] OemTableId [ CPU1PM] [20060707] ACPI: Processor [CPU1] (supports 8 throttling states) Parsing all Control Methods: Table [SSDT](id 00C7) - 10 Objects with 0 Devices 4 Methods 0 Regions ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ AMI] OemTableId [ CPU2PM] [20060707] ACPI: Processor [CPU2] (supports 8 throttling states) ACPI: Getting cpuindex for acpiid 0x3 ACPI: Getting cpuindex for acpiid 0x4 Real Time Clock Driver v1.12ac Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 945G Chipset. agpgart: Detected 7932K stolen memory. agpgart: AGP aperture is 256M @ 0xd0000000 [drm] Initialized drm 1.1.0 20060810 ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 [drm] Initialized i915 1.6.0 20060119 on minor 0 Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). Hangcheck: Using get_cycles(). intelfb: intelfb_init intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets intelfb: Version 0.9.4 intelfb: intelfb_setup intelfb: no options intelfb: intelfb_pci_register intelfb: fb aperture: 0xd0000000/0x10000000, MMIO region: 0xcfd00000/0x80000 intelfb: 00:02.0: Intel(R) 945G, aperture size 256MB, stolen memory 7932kB intelfb: fb: 0xd0000000(+ 0x0)/0x7bf000 (0xf8a00000) intelfb: MMIO: 0xcfd00000/0x80000 (0xfc200000) intelfb: ring buffer: 0xd3001000/0x10000 (0xfba01000) intelfb: HW cursor: 0x0/0x0 (0x00000000) (offset 0x0) (phys 0x0) intelfb: options: vram = 4, accel = 1, hwcursor = 0, fixed = 0, noinit = 0 intelfb: options: mode = "" intelfb: intelfb_set_fbinfo intelfb: intelfb_init_var intelfb: intelfb_check_var: accel_flags is 0 intelfb: Mode is interlaced. intelfb: intelfb_check_var: accel_flags is 0 intelfb: intelfb_var_to_depth: bpp: 32, green.length is 0 intelfb: intelfb_check_var: accel_flags is 0 intelfb: intelfb_var_to_depth: bpp: 32, green.length is 8 intelfb: Initial video mode is 1024x768-32@70. intelfb: Initial video mode is from 1. intelfb: update_dinfo intelfb: intelfb_var_to_depth: bpp: 32, green.length is 8 intelfb: I2C bus CRTDDC_A registered. intelfb: I2C bus SDVOCTRL_E registered. intelfb: intelfbhw_print_hw_state hw state dump start VGA0_DIVISOR: 0x00031108 VGA1_DIVISOR: 0x00031406 VGAPD: 0x00020002 VGA0: (m1, m2, n, p1, p2) = (17, 8, 3, 2, 0) VGA0: clock is 100800 VGA1: (m1, m2, n, p1, p2) = (20, 6, 3, 2, 0) VGA1: clock is 113280 DPLL_A: 0x84800003 DPLL_B: 0x84800003 FPA0: 0x00031108 FPA1: 0x00031108 FPB0: 0x00031108 FPB1: 0x00031108 PLLA0: (m1, m2, n, p1, p2) = (17, 8, 3, 8, 0) PLLA0: clock is 25200 PLLA1: (m1, m2, n, p1, p2) = (17, 8, 3, 8, 0) PLLA1: clock is 25200 HTOTAL_A: 0x031f027f HBLANK_A: 0x03170287 HSYNC_A: 0x02ef028f VTOTAL_A: 0x020c01df VBLANK_A: 0x020401e7 VSYNC_A: 0x01eb01e9 SRC_SIZE_A: 0x027f01df BCLRPAT_A: 0x00000000 HTOTAL_B: 0x031f027f HBLANK_B: 0x03170287 HSYNC_B: 0x02ef028f VTOTAL_B: 0x020c01df VBLANK_B: 0x020401e7 VSYNC_B: 0x01eb01e9 SRC_SIZE_B: 0x027f01df BCLRPAT_B: 0x00000000 ADPA: 0x80008000 DVOA: 0x00000000 DVOB: 0x00480000 DVOC: 0x00480000 DVOA_SRCDIM: 0x00000000 DVOB_SRCDIM: 0x00000000 DVOC_SRCDIM: 0x00000000 LVDS: 0x00000000 PIPEACONF: 0x80000000 PIPEBCONF: 0x80000000 DISPARB: 0x00001d9c CURSOR_A_CONTROL: 0x00000000 CURSOR_B_CONTROL: 0x00000000 CURSOR_A_BASEADDR: 0x00000000 CURSOR_B_BASEADDR: 0x00000000 CURSOR_A_PALETTE: 0x00000000, 0x00000000, 0x00000000, 0x00000000 CURSOR_B_PALETTE: 0x00000000, 0x00000000, 0x00000000, 0x00000000 CURSOR_SIZE: 0x00000000 DSPACNTR: 0x48000000 DSPBCNTR: 0x01000000 DSPABASE: 0x00000000 DSPBBASE: 0x00000000 DSPASTRIDE: 0x00000280 DSPBSTRIDE: 0x00000000 VGACNTRL: 0x0000008e ADD_ID: 0x00000000 SWF00 0x00000000 SWF01 0x00000000 SWF02 0x00000000 SWF03 0x00000000 SWF04 0x00000000 SWF05 0x00000000 SWF06 0x00000000 SWF10 0x00000001 SWF11 0x00000000 SWF12 0x00000000 SWF13 0x03030000 SWF14 0xc0000000 SWF15 0x00000041 SWF16 0x00000000 SWF30 0x00000000 SWF31 0x00000000 SWF32 0x00000000 FENCE0 0x00000000 FENCE1 0x00000000 FENCE2 0x00000000 FENCE3 0x00000000 FENCE4 0x00000000 FENCE5 0x00000000 FENCE6 0x00000000 FENCE7 0x00000000 INSTPM 0x00000000 MEM_MODE 0x00000000 FW_BLC_0 0x03060106 FW_BLC_1 0x00000306 HWSTAM 0xffff IER 0x0000 IIR 0x0000 IMR 0xffff hw state dump end Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) Intel(R) PRO/1000 Network Driver - version 7.3.15-k2 Copyright (c) 1999-2006 Intel Corporation. ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:02:00.0 to 64 e1000: 0000:02:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:17:31:5c:57:c0 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI e100: Copyright(c) 1999-2006 Intel Corporation forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.59. tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky <[email protected]> netconsole: not configured, aborting Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH7: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 ICH7: chipset revision 1 ICH7: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... hda: DVDRW DRW-3S163, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... Probing IDE interface ide1... hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 3ware Storage Controller device driver for Linux v1.26.02.001. ata_piix 0000:00:1f.2: version 2.00ac7 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0xA800 ctl 0xA402 bmdma 0x9400 irq 17 ata2: SATA max UDMA/133 cmd 0xA000 ctl 0x9802 bmdma 0x9408 irq 17 scsi0 : ata_piix ata1.00: ATA-7, max UDMA/133, 625142448 sectors: LBA48 NCQ (depth 0/32) ata1.00: ata1: dev 0 multi count 16 ata1.01: ATA-7, max UDMA/133, 625142448 sectors: LBA48 NCQ (depth 0/32) ata1.01: ata1: dev 1 multi count 16 ata1.00: configured for UDMA/133 ata1.01: configured for UDMA/133 scsi1 : ata_piix ata2.00: ATA-7, max UDMA/133, 625142448 sectors: LBA48 NCQ (depth 0/32) ata2.00: ata2: dev 0 multi count 16 ata2.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > sd 0:0:0:0: Attached scsi disk sda sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 0:0:1:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 > sd 0:0:1:0: Attached scsi disk sdb sd 0:0:1:0: Attached scsi generic sg1 type 0 scsi 1:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 SCSI device sdc: 625142448 512-byte hdwr sectors (320073 MB) sdc: Write Protect is off sdc: Mode Sense: 00 3a 00 00 SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sdc: 625142448 512-byte hdwr sectors (320073 MB) sdc: Write Protect is off sdc: Mode Sense: 00 3a 00 00 SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 sdc6 sdc7 > sd 1:0:0:0: Attached scsi disk sdc sd 1:0:0:0: Attached scsi generic sg2 type 0 Fusion MPT base driver 3.04.02 Copyright (c) 1999-2005 LSI Logic Corporation Fusion MPT SPI Host driver 3.04.02 ieee1394: raw1394: /dev/raw1394 device initialized usbmon: debugfs is not available ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 19, io base 0x00008000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 17, io base 0x00008400 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00008800 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 20, io base 0x00009000 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usbcore: registered new interface driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input2 i2c /dev entries driver md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid10 personality registered for level 10 raid6: int32x1 898 MB/s raid6: int32x2 945 MB/s raid6: int32x4 757 MB/s raid6: int32x8 824 MB/s raid6: mmxx1 3027 MB/s raid6: mmxx2 3472 MB/s raid6: sse1x1 1816 MB/s raid6: sse1x2 2617 MB/s raid6: sse2x1 3523 MB/s raid6: sse2x2 4078 MB/s raid6: using algorithm sse2x2 (4078 MB/s) md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 raid5: automatically using best checksumming function: pIII_sse pIII_sse : 8640.000 MB/sec raid5: using function: pIII_sse (8640.000 MB/sec) device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: [email protected] logips2pp: Detected unknown logitech mouse model 11 Intel 810 + AC97 Audio, version 1.01, 11:47:05 Jan 12 2007 Advanced Linux Sound Architecture Driver Version 1.0.14rc1 (Wed Dec 20 08:11:48 2006 UTC). ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 19 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1b.0 to 64 hda_codec: Unknown model for ALC882, trying auto-probe from BIOS... ALSA device list: #0: HDA Intel at 0xcfdfc000 irq 20 TCP cubic registered TCP highspeed registered NET: Registered protocol family 1 NET: Registered protocol family 17 acpi_processor-0740 [00] processor_preregister_: Error while parsing _PSD domain information. Assuming no coordination acpi_processor-0740 [00] processor_preregister_: Error while parsing _PSD domain information. Assuming no coordination Starting balanced_irq Using IPI Shortcut mode drivers/rtc/hctosys.c: unable to open rtc device (rtc0) Freeing unused kernel memory: 324k freed Time: tsc clocksource has been installed. md: Autodetecting RAID arrays. md: invalid raid superblock magic on sda7 md: sda7 has invalid sb, not importing! input: PS/2 Logitech Mouse as /class/input/input3 md: invalid raid superblock magic on sdb7 md: sdb7 has invalid sb, not importing! md: invalid raid superblock magic on sdc7 md: sdc7 has invalid sb, not importing! md: autorun ... md: considering sdc6 ... md: adding sdc6 ... md: sdc5 has different UUID to sdc6 md: sdc3 has different UUID to sdc6 md: sdc2 has different UUID to sdc6 md: sdc1 has different UUID to sdc6 md: adding sdb6 ... md: sdb5 has different UUID to sdc6 md: sdb3 has different UUID to sdc6 md: sdb2 has different UUID to sdc6 md: sdb1 has different UUID to sdc6 md: adding sda6 ... md: sda5 has different UUID to sdc6 md: sda3 has different UUID to sdc6 md: sda2 has different UUID to sdc6 md: sda1 has different UUID to sdc6 md: created md4 md: bind<sda6> md: bind<sdb6> md: bind<sdc6> md: running: <sdc6><sdb6><sda6> raid1: raid set md4 active with 3 out of 3 mirrors md: considering sdc5 ... md: adding sdc5 ... md: sdc3 has different UUID to sdc5 md: sdc2 has different UUID to sdc5 md: sdc1 has different UUID to sdc5 md: adding sdb5 ... md: sdb3 has different UUID to sdc5 md: sdb2 has different UUID to sdc5 md: sdb1 has different UUID to sdc5 md: adding sda5 ... md: sda3 has different UUID to sdc5 md: sda2 has different UUID to sdc5 md: sda1 has different UUID to sdc5 md: created md3 md: bind<sda5> md: bind<sdb5> md: bind<sdc5> md: running: <sdc5><sdb5><sda5> raid5: device sdc5 operational as raid disk 2 raid5: device sdb5 operational as raid disk 1 raid5: device sda5 operational as raid disk 0 raid5: allocated 3157kB for md3 raid5: raid level 5 set md3 active with 3 out of 3 devices, algorithm 2 RAID5 conf printout: --- rd:3 wd:3 disk 0, o:1, dev:sda5 disk 1, o:1, dev:sdb5 disk 2, o:1, dev:sdc5 md: considering sdc3 ... md: adding sdc3 ... md: sdc2 has different UUID to sdc3 md: sdc1 has different UUID to sdc3 md: adding sdb3 ... md: sdb2 has different UUID to sdc3 md: sdb1 has different UUID to sdc3 md: adding sda3 ... md: sda2 has different UUID to sdc3 md: sda1 has different UUID to sdc3 md: created md2 md: bind<sda3> md: bind<sdb3> md: bind<sdc3> md: running: <sdc3><sdb3><sda3> raid5: device sdc3 operational as raid disk 2 raid5: device sdb3 operational as raid disk 1 raid5: device sda3 operational as raid disk 0 raid5: allocated 3157kB for md2 raid5: raid level 5 set md2 active with 3 out of 3 devices, algorithm 2 RAID5 conf printout: --- rd:3 wd:3 disk 0, o:1, dev:sda3 disk 1, o:1, dev:sdb3 disk 2, o:1, dev:sdc3 md: considering sdc2 ... md: adding sdc2 ... md: sdc1 has different UUID to sdc2 md: adding sdb2 ... md: sdb1 has different UUID to sdc2 md: adding sda2 ... md: sda1 has different UUID to sdc2 md: created md1 md: bind<sda2> md: bind<sdb2> md: bind<sdc2> md: running: <sdc2><sdb2><sda2> raid5: device sdc2 operational as raid disk 2 raid5: device sdb2 operational as raid disk 1 raid5: device sda2 operational as raid disk 0 raid5: allocated 3157kB for md1 raid5: raid level 5 set md1 active with 3 out of 3 devices, algorithm 2 RAID5 conf printout: --- rd:3 wd:3 disk 0, o:1, dev:sda2 disk 1, o:1, dev:sdb2 disk 2, o:1, dev:sdc2 md: considering sdc1 ... md: adding sdc1 ... md: adding sdb1 ... md: adding sda1 ... md: created md0 md: bind<sda1> md: bind<sdb1> md: bind<sdc1> md: running: <sdc1><sdb1><sda1> raid1: raid set md0 active with 3 out of 3 mirrors md: ... autorun DONE. md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. audit(1168621043.111:2): enforcing=1 old_enforcing=0 auid=4294967295 security: 3 users, 6 roles, 1583 types, 172 bools, 1 sens, 1024 cats security: 59 classes, 49551 rules security: class dccp_socket not defined in policy security: permission dccp_recv in class node not defined in policy security: permission dccp_send in class node not defined in policy security: permission dccp_recv in class netif not defined in policy security: permission dccp_send in class netif not defined in policy SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev dm-0, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts audit(1168621043.425:3): policy loaded auid=4294967295 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts NET: Registered protocol family 10 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on md0, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev md0, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs kjournald starting. Commit interval 5 seconds EXT3 FS on dm-1, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev dm-1, type ext3), uses xattr Adding 2039800k swap on /dev/md1. Priority:-1 extents:1 across:2039800k ip_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (8192 buckets, 65536 max) process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.base_reachable_time; Use net.ipv6.neigh.lo.base_reachable_time_ms instead. ADDRCONF(NETDEV_UP): eth0: link is not ready e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts eth0: no IPv6 routers present audit(1168621567.083:4): enforcing=0 old_enforcing=1 auid=4294967295 audit(1168621567.084:5): user pid=4083 uid=0 auid=4294967295 subj=root:system_r:unconfined_t:s0-s0:c0.c1023 msg='avc: received setenforce notice (enforcing=0) : exe="/bin/dbus-daemon" (sauid=0, hostname=?, addr=?, terminal=?)' kvm: msrs: 2 audit(1168621749.964:6): enforcing=1 old_enforcing=0 auid=4294967295 audit(1168621749.969:7): user pid=4083 uid=0 auid=4294967295 subj=root:system_r:unconfined_t:s0-s0:c0.c1023 msg='avc: received setenforce notice (enforcing=1) : exe="/bin/dbus-daemon" (sauid=0, hostname=?, addr=?, terminal=?)'
posidon:root> Q -soundhw sb16 -m 384 -no-acpi -win2k-hack \ > -hda ~davidsen/Virtual_Machines/Images.kvm/Win98SE-1.kvm \ > -cdrom ~davidsen/Virtual_Machines/CDs/Win98SE.iso \ > -boot d exception 13 (0) Aborted posidon:root>
posidon.tmr.com
description: Desktop Computer
product: System Product Name
vendor: System manufacturer
version: System Version
serial: System Serial Number
width: 32 bits
capabilities: smbios-2.4 dmi-2.4
configuration: boot=normal chassis=desktop uuid=D4B6237F-74FE-D511-9994-646FB03921C6
*-core
description: Motherboard
product: P5LD2-VM
vendor: ASUSTeK Computer INC.
physical id: 0
version: Rev 1.xx
serial: MB-1234567890
slot: To Be Filled By O.E.M.
*-firmware
description: BIOS
vendor: American Megatrends Inc.
physical id: 0
version: 1102 (10/27/2006)
size: 64KB
capacity: 448KB
capabilities: isa pci pnp apm upgrade shadowing escd cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot zipboot biosbootspecification
*-cpu
description: CPU
product: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz
vendor: Intel Corp.
physical id: 4
bus info: cpu@0
version: 6.15.6
serial: 0000-06F6-0000-0000-0000-0000
slot: LGA 775
size: 1596MHz
capacity: 3800MHz
width: 64 bits
clock: 266MHz
capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx x86-64 constant_tsc pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr lahf_lm cpufreq
configuration: id=0
*-cache:0
description: L1 cache
physical id: 5
slot: L1-Cache
size: 32KB
capacity: 32KB
capabilities: pipeline-burst internal varies data
*-cache:1
description: L2 cache
physical id: 6
slot: L2-Cache
size: 4MB
capacity: 4MB
capabilities: pipeline-burst internal varies instruction
*-cache:2 DISABLED
description: L3 cache
physical id: 7
slot: L3-Cache
capabilities: internal
*-logicalcpu:0
description: Logical CPU
physical id: 0.1
width: 64 bits
capabilities: logical
*-logicalcpu:1
description: Logical CPU
physical id: 0.2
width: 64 bits
capabilities: logical
*-memory
description: System Memory
physical id: 35
slot: System board or motherboard
size: 2GB
*-bank:0
description: DIMM SDRAM Synchronous
product: PartNum0
vendor: Manufacturer0
physical id: 0
serial: SerNum0
slot: DIMM0
size: 1GB
width: 64 bits
*-bank:1
description: DIMM [empty]
product: PartNum1
vendor: Manufacturer1
physical id: 1
serial: SerNum1
slot: DIMM1
*-bank:2
description: DIMM SDRAM Synchronous
product: PartNum2
vendor: Manufacturer2
physical id: 2
serial: SerNum2
slot: DIMM2
size: 1GB
width: 64 bits
*-bank:3
description: DIMM [empty]
product: PartNum3
vendor: Manufacturer3
physical id: 3
serial: SerNum3
slot: DIMM3
*-pci
description: Host bridge
product: 82945G/GZ/P/PL Memory Controller Hub
vendor: Intel Corporation
physical id: 100
bus info: pci@00:00.0
version: 02
width: 32 bits
clock: 33MHz
*-display
description: VGA compatible controller
product: 82945G/GZ Integrated Graphics Controller
vendor: Intel Corporation
physical id: 2
bus info: pci@00:02.0
logical name: /dev/fb1
version: 02
size: 256MB
width: 32 bits
clock: 33MHz
capabilities: vga bus_master cap_list fb accelerated
configuration: depth=32 driver=intelfb frequency=70.07Hz latency=0 mode=1024x768 visual=truecolor xres=1024 yres=768
resources: iomemory:cfd00000-cfd7ffff ioport:7800-7807 iomemory:d0000000-dfffffff iomemory:cfd80000-cfdbffff irq:16
*-multimedia
description: Audio device
product: 82801G (ICH7 Family) High Definition Audio Controller
vendor: Intel Corporation
physical id: 1b
bus info: pci@00:1b.0
version: 01
width: 64 bits
clock: 33MHz
capabilities: bus_master cap_list
configuration: driver=HDA Intel latency=0
resources: iomemory:cfdfc000-cfdfffff irq:20
*-pci:0
description: PCI bridge
product: 82801G (ICH7 Family) PCI Express Port 1
vendor: Intel Corporation
physical id: 1c
bus info: pci@00:1c.0
version: 01
width: 32 bits
clock: 33MHz
capabilities: pci normal_decode bus_master cap_list
*-pci:1
description: PCI bridge
product: 82801G (ICH7 Family) PCI Express Port 2
vendor: Intel Corporation
physical id: 1c.1
bus info: pci@00:1c.1
version: 01
width: 32 bits
clock: 33MHz
capabilities: pci normal_decode bus_master cap_list
*-network
description: Ethernet interface
product: 82573L Gigabit Ethernet Controller
vendor: Intel Corporation
physical id: 0
bus info: pci@02:00.0
logical name: eth0
version: 00
serial: 00:17:31:5c:57:c0
size: 100MB/s
capacity: 1GB/s
width: 32 bits
clock: 33MHz
capabilities: bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=e1000 driverversion=7.3.15-k2 duplex=full firmware=0.5-7 ip=192.168.1.47 latency=0 link=yes multicast=yes port=twisted pair speed=100MB/s
resources: iomemory:cffe0000-cfffffff ioport:d800-d81f irq:223
*-usb:0
description: USB Controller
product: 82801G (ICH7 Family) USB UHCI #1
vendor: Intel Corporation
physical id: 1d
bus info: pci@00:1d.0
version: 01
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master
configuration: driver=uhci_hcd latency=0
resources: ioport:8000-801f irq:19
*-usbhost
product: UHCI Host Controller
vendor: Linux 2.6.20-rc4-git1 uhci_hcd
physical id: 1
bus info: usb@1
logical name: usb1
version: 2.06
capabilities: usb-1.10
configuration: driver=hub maxpower=0mA slots=2 speed=12.0MB/s
*-usb:1
description: USB Controller
product: 82801G (ICH7 Family) USB UHCI #2
vendor: Intel Corporation
physical id: 1d.1
bus info: pci@00:1d.1
version: 01
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master
configuration: driver=uhci_hcd latency=0
resources: ioport:8400-841f irq:17
*-usbhost
product: UHCI Host Controller
vendor: Linux 2.6.20-rc4-git1 uhci_hcd
physical id: 1
bus info: usb@2
logical name: usb2
version: 2.06
capabilities: usb-1.10
configuration: driver=hub maxpower=0mA slots=2 speed=12.0MB/s
*-usb:2
description: USB Controller
product: 82801G (ICH7 Family) USB UHCI #3
vendor: Intel Corporation
physical id: 1d.2
bus info: pci@00:1d.2
version: 01
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master
configuration: driver=uhci_hcd latency=0
resources: ioport:8800-881f irq:18
*-usbhost
product: UHCI Host Controller
vendor: Linux 2.6.20-rc4-git1 uhci_hcd
physical id: 1
bus info: usb@3
logical name: usb3
version: 2.06
capabilities: usb-1.10
configuration: driver=hub maxpower=0mA slots=2 speed=12.0MB/s
*-usb:3
description: USB Controller
product: 82801G (ICH7 Family) USB UHCI #4
vendor: Intel Corporation
physical id: 1d.3
bus info: pci@00:1d.3
version: 01
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master
configuration: driver=uhci_hcd latency=0
resources: ioport:9000-901f irq:20
*-usbhost
product: UHCI Host Controller
vendor: Linux 2.6.20-rc4-git1 uhci_hcd
physical id: 1
bus info: usb@4
logical name: usb4
version: 2.06
capabilities: usb-1.10
configuration: driver=hub maxpower=0mA slots=2 speed=12.0MB/s
*-pci:2
description: PCI bridge
product: 82801 PCI Bridge
vendor: Intel Corporation
physical id: 1e
bus info: pci@00:1e.0
version: e1
width: 32 bits
clock: 33MHz
capabilities: pci subtractive_decode bus_master cap_list
*-storage UNCLAIMED
description: Mass storage controller
product: ITE 8211F Single Channel UDMA 133 (ASUS 8211 (ITE IT8212 ATA RAID Controller))
vendor: Integrated Technology Express, Inc.
physical id: 4
bus info: pci@01:04.0
version: 11
width: 32 bits
clock: 66MHz
capabilities: storage bus_master cap_list
configuration: latency=0 maxlatency=8 mingnt=8
resources: ioport:c800-c807 ioport:c400-c403 ioport:c000-c007 ioport:b800-b803 ioport:b400-b40f irq:5
*-isa
description: ISA bridge
product: 82801GB/GR (ICH7 Family) LPC Interface Bridge
vendor: Intel Corporation
physical id: 1f
bus info: pci@00:1f.0
version: 01
width: 32 bits
clock: 33MHz
capabilities: isa bus_master cap_list
configuration: latency=0
*-ide:0
description: IDE interface
product: 82801G (ICH7 Family) IDE Controller
vendor: Intel Corporation
physical id: 1f.1
bus info: pci@00:1f.1
version: 01
width: 32 bits
clock: 33MHz
capabilities: ide bus_master
configuration: driver=PIIX_IDE latency=0
resources: ioport:1f0-1f7 ioport:3f4-3f3 ioport:170-177 ioport:374-373 ioport:ffa0-ffaf irq:18
*-ide
description: IDE Channel 0
physical id: 0
bus info: ide@0
logical name: ide0
clock: 33MHz
*-cdrom
description: DVD writer
product: DVDRW DRW-3S163
physical id: 0
bus info: [email protected]
logical name: /dev/hda
version: BSG2
capabilities: packet atapi cdrom removable nonmagnetic dma lba iordy audio cd-r cd-rw dvd dvd-r
configuration: mode=udma2
*-disc
physical id: 0
logical name: /dev/hda
*-ide:1
description: IDE interface
product: 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller IDE
vendor: Intel Corporation
physical id: 1f.2
bus info: pci@00:1f.2
logical name: scsi0
logical name: scsi1
version: 01
width: 32 bits
clock: 66MHz
capabilities: ide bus_master cap_list emulated
configuration: driver=ata_piix latency=0
resources: ioport:a800-a807 ioport:a400-a403 ioport:a000-a007 ioport:9800-9803 ioport:9400-940f irq:17
*-disk:0
description: SCSI Disk
product: ST3320620AS
vendor: ATA
physical id: 0
bus info: scsi@0:0.0.0
logical name: /dev/sda
version: 3.AA
serial: 3QF06XHP
size: 298GB
capabilities: partitioned partitioned:dos
configuration: ansiversion=5
*-volume:0
description: Linux raid autodetect partition
physical id: 1
bus info: scsi@0:0.0.0,1
logical name: /dev/sda1
capacity: 101MB
capabilities: primary bootable multi
*-volume:1
description: Linux raid autodetect partition
physical id: 2
bus info: scsi@0:0.0.0,2
logical name: /dev/sda2
capacity: 996MB
capabilities: primary multi
*-volume:2
description: Linux raid autodetect partition
physical id: 3
bus info: scsi@0:0.0.0,3
logical name: /dev/sda3
serial: xSRU1Z-M2up-ALnl-tOqY-zSlf-x2F9-ZKj2mR
size: 390GB
capabilities: primary multi lvm2
*-volume:3
description: Extended partition
physical id: 4
bus info: scsi@0:0.0.0,4
logical name: /dev/sda4
size: 101GB
capacity: 101GB
capabilities: primary extended partitioned partitioned:extended
*-logicalvolume:0
description: Linux raid autodetect partition
physical id: 5
logical name: /dev/sda5
serial: UTXwbr-aVT9-O3ez-1nQV-R2YL-wn21-DGPBwt
size: 58GB
capabilities: multi lvm2
*-logicalvolume:1
description: Linux raid autodetect partition
physical id: 6
logical name: /dev/sda6
capacity: 101MB
capabilities: multi
*-logicalvolume:2
description: Linux raid autodetect partition
physical id: 7
logical name: /dev/sda7
capacity: 3820MB
capabilities: multi
*-disk:1
description: SCSI Disk
product: ST3320620AS
vendor: ATA
physical id: 0.1.0
bus info: scsi@0:0.1.0
logical name: /dev/sdb
version: 3.AA
serial: 3QF070WA
size: 298GB
capabilities: partitioned partitioned:dos
configuration: ansiversion=5
*-volume:0
description: Linux raid autodetect partition
physical id: 1
bus info: scsi@0:0.1.0,1
logical name: /dev/sdb1
capacity: 101MB
capabilities: primary bootable multi
*-volume:1
description: Linux raid autodetect partition
physical id: 2
bus info: scsi@0:0.1.0,2
logical name: /dev/sdb2
capacity: 996MB
capabilities: primary multi
*-volume:2
description: Linux raid autodetect partition
physical id: 3
bus info: scsi@0:0.1.0,3
logical name: /dev/sdb3
capacity: 195GB
capabilities: primary multi
*-volume:3
description: Extended partition
physical id: 4
bus info: scsi@0:0.1.0,4
logical name: /dev/sdb4
size: 101GB
capacity: 101GB
capabilities: primary extended partitioned partitioned:extended
*-logicalvolume:0
description: Linux raid autodetect partition
physical id: 5
logical name: /dev/sdb5
capacity: 29GB
capabilities: multi
*-logicalvolume:1
description: Linux raid autodetect partition
physical id: 6
logical name: /dev/sdb6
capacity: 101MB
capabilities: multi
*-logicalvolume:2
description: Linux raid autodetect partition
physical id: 7
logical name: /dev/sdb7
capacity: 3820MB
capabilities: multi
*-disk:2
description: SCSI Disk
product: ST3320620AS
vendor: ATA
physical id: 1
bus info: scsi@1:0.0.0
logical name: /dev/sdc
version: 3.AA
serial: 3QF05YW7
size: 298GB
capabilities: partitioned partitioned:dos
configuration: ansiversion=5
*-volume:0
description: Linux raid autodetect partition
physical id: 1
bus info: scsi@1:0.0.0,1
logical name: /dev/sdc1
capacity: 101MB
capabilities: primary bootable multi
*-volume:1
description: Linux raid autodetect partition
physical id: 2
bus info: scsi@1:0.0.0,2
logical name: /dev/sdc2
capacity: 996MB
capabilities: primary multi
*-volume:2
description: Linux raid autodetect partition
physical id: 3
bus info: scsi@1:0.0.0,3
logical name: /dev/sdc3
capacity: 195GB
capabilities: primary multi
*-volume:3
description: Extended partition
physical id: 4
bus info: scsi@1:0.0.0,4
logical name: /dev/sdc4
size: 101GB
capacity: 101GB
capabilities: primary extended partitioned partitioned:extended
*-logicalvolume:0
description: Linux raid autodetect partition
physical id: 5
logical name: /dev/sdc5
serial: UTXwbr-aVT9-O3ez-1nQV-R2YL-wn21-DGPBwt
size: 58GB
capabilities: multi lvm2
*-logicalvolume:1
description: Linux raid autodetect partition
physical id: 6
logical name: /dev/sdc6
capacity: 101MB
capabilities: multi
*-logicalvolume:2
description: Linux raid autodetect partition
physical id: 7
logical name: /dev/sdc7
capacity: 3820MB
capabilities: multi
*-serial UNCLAIMED
description: SMBus
product: 82801G (ICH7 Family) SMBus Controller
vendor: Intel Corporation
physical id: 1f.3
bus info: pci@00:1f.3
version: 01
width: 32 bits
clock: 33MHz
configuration: latency=0
resources: ioport:400-41f
- Prev by Date: Re: 2.6.20-rc4-mm1 md problem
- Next by Date: Re: O_DIRECT question
- Previous by thread: [PATCH] qconf: fix showing help info on failed search
- Next by thread: Linux v2.6.20-rc5
- Index(es):
 |