On 1/7/07, Bartlomiej Zolnierkiewicz <[email protected]> wrote:
On 1/6/07, Conke Hu <[email protected]> wrote:
> A previous patch to atiixp.c was removed but some code has not been
This one?
http://kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=ab17443a3df35abe4b7529e83511a591aa7384f3
Doesn't it break existing setups without giving ANY warning?
theoretical (I don't have hardware in question) scenario:
- user uses atiixp and has modular libata/ahci (or no libata/ahci et all)
- user does kernel upgrade
- boot fails
- ...
If this is true please add something like
printk(KERN_WARNING "PCI: setting SB600 SATA to AHCI mode"
" (please use ahci driver instead of atiixp)\n");
to quirk_sb600_sata() so people will at least know what is wrong...
> cleaned. Now we remove these code sine they are no use any longer.
Acked-by: Bartlomiej Zolnierkiewicz <[email protected]>
[ but the patch is line wrapped and unfortunately doesn't apply ]
PS: please always cc: [email protected] on PATA/SATA patches
Thanks,
Bart
Hi Bart,
I've tried to access the following link to make sure which it is,
but failed. The internet here is almost broken.
http://kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=ab17443a3df35abe4b7529e83511a591aa7384f3
I sent out 2 patches for the same SB600 legacy IDE issue. the later
(sb600 pci qurik) is better so we should clean the previous patch
which was applied to atiixp.c. -- that is what this patch does.
BTW, I re-create and re-send the patch (see below) based on
2.6.20-rc4, in last patch I fogot to rename atiixp.c.1 to atiixp.c
which may lead to patch fail, nothing else different.
And maybe no need to re-ACK if last one is accepted:)
Thanks!
--------------------
--- linux-2.6.20-rc4/drivers/ide/pci/atiixp.c.1 2007-01-09
15:19:05.000000000 +0800
+++ linux-2.6.20-rc4/drivers/ide/pci/atiixp.c 2007-01-09
15:17:54.000000000 +0800
@@ -320,20 +320,6 @@ static void __devinit init_hwif_atiixp(i
hwif->drives[0].autodma = hwif->autodma;
}
-static void __devinit init_hwif_sb600_legacy(ide_hwif_t *hwif)
-{
-
- hwif->atapi_dma = 1;
- hwif->ultra_mask = 0x7f;
- hwif->mwdma_mask = 0x07;
- hwif->swdma_mask = 0x07;
-
- if (!noautodma)
- hwif->autodma = 1;
- hwif->drives[0].autodma = hwif->autodma;
- hwif->drives[1].autodma = hwif->autodma;
-}
-
static ide_pci_device_t atiixp_pci_info[] __devinitdata = {
{ /* 0 */
.name = "ATIIXP",
@@ -342,13 +328,7 @@ static ide_pci_device_t atiixp_pci_info[
.autodma = AUTODMA,
.enablebits = {{0x48,0x01,0x00}, {0x48,0x08,0x00}},
.bootable = ON_BOARD,
- },{ /* 1 */
- .name = "ATI SB600 SATA Legacy IDE",
- .init_hwif = init_hwif_sb600_legacy,
- .channels = 2,
- .autodma = AUTODMA,
- .bootable = ON_BOARD,
- }
+ },
};
/**
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]