[PATCH 2.6.20-rc2] Add a quirk to allow ENE PCI SD card readers to work again

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add a quirk to allow ENE PCI SD card readers to work again

Support for these devices was broken for 2.6.18-rc1 and later by commit
146ad66eac836c0b976c98f428d73e1f6a75270d, which added voltage level support.

This restores the previous behaviour for these devices by ensuring that when
the voltage is changed, only one write to set the voltage is performed.

It may be that both writes are needed if the voltage is being changed between
two non-zero values or that it's safe to ensure that only one write is done
if the hardware only supports one voltage; I don't know whether either is the
case nor can I test since I have only the one SD reader (1524:0550), and it
supports just the one voltage.

Signed-off-by: Darren Salt <[email protected]>

diff -ur linux-2.6.20-rc2.orig/drivers/mmc/sdhci.c linux-2.6.20-rc2/drivers/mmc/sdhci.c
--- linux-2.6.20-rc2.orig/drivers/mmc/sdhci.c	2006-12-30 15:34:11.000000000 +0000
+++ linux-2.6.20-rc2/drivers/mmc/sdhci.c	2006-12-31 16:43:50.000000000 +0000
@@ -37,6 +37,7 @@
 #define SDHCI_QUIRK_FORCE_DMA				(1<<1)
 /* Controller doesn't like some resets when there is no card inserted. */
 #define SDHCI_QUIRK_NO_CARD_NO_RESET			(1<<2)
+#define SDHCI_QUIRK_SINGLE_POWER_WRITE			(1<<3)
 
 static const struct pci_device_id pci_ids[] __devinitdata = {
 	{
@@ -65,6 +66,16 @@
 		.driver_data	= SDHCI_QUIRK_FORCE_DMA,
 	},
 
+	{
+		.class		= PCI_CLASS_SYSTEM_SDHCI << 8,
+		.class_mask	= 0xFFFF00,
+		.vendor		= PCI_VENDOR_ID_ENE,
+		.device		= PCI_ANY_ID,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.driver_data	= SDHCI_QUIRK_SINGLE_POWER_WRITE,
+	},
+
 	{	/* Generic SD host controller */
 		PCI_DEVICE_CLASS((PCI_CLASS_SYSTEM_SDHCI << 8), 0xFFFF00)
 	},
@@ -669,16 +680,17 @@
 
 static void sdhci_set_power(struct sdhci_host *host, unsigned short power)
 {
-	u8 pwr;
+	u8 pwr = 0;
 
 	if (host->power == power)
 		return;
 
-	writeb(0, host->ioaddr + SDHCI_POWER_CONTROL);
-
 	if (power == (unsigned short)-1)
 		goto out;
 
+	if ((host->chip->quirks & SDHCI_QUIRK_SINGLE_POWER_WRITE) == 0)
+		writeb(0, host->ioaddr + SDHCI_POWER_CONTROL);
+
 	pwr = SDHCI_POWER_ON;
 
 	switch (power) {

-- 
| Darren Salt    | linux or ds at              | nr. Ashington, | Toon
| RISC OS, Linux | youmustbejoking,demon,co,uk | Northumberland | Army
|   Kill all extremists!

Confucius say: Many pages make thick book.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux