Hi! > >Stop spreading fud. Take powersave + suspend from > >suse10.2, and see > >if you can break it. > > > >sata_nv seems to have problem, that's it. and it > >triggered problem in > >reiserfs. Use ext3 if you care about your data, and yes > >your drivers > >need to support suspend/resume. > > > My Compaq laptop, a Presario 2200, has video lockups > using suspend to disk and a dead system everytime I use > it. I don't Try with vga=1 (no framebuffer) and minimum number of modules. > think its fud. I also conceed its not Linux's fault most > of the time. These vendors put Windows specific hardware suspend to ram is usually video bios problem; suspend to disk tends to be linux problem. Pavel -- Thanks for all the (sleeping) penguins. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
- References:
- ReiserFS corruption with 2.6.19 (Was 2.6.19 is not stable with SATA and should not be used by any meansis not stable with SATA and should not be used by any means)
- From: "Andrew Robinson" <[email protected]>
- Re: ReiserFS corruption with 2.6.19 (Was 2.6.19 is not stable with SATA and should not be used by any meansis not stable with SATA and should not be used by any means)
- From: Olivier Galibert <[email protected]>
- Re: ReiserFS corruption with 2.6.19 (Was 2.6.19 is not stable with SATA and should not be used by any meansis not stable with SATA and should not be used by any means)
- From: Pavel Machek <[email protected]>
- Re: ReiserFS corruption with 2.6.19 (Was 2.6.19 is not stable with SATA and should not be used by any meansis not stable with SATA and should not be used by any means)
- From: "Jeffrey V. Merkey" <[email protected]>
- ReiserFS corruption with 2.6.19 (Was 2.6.19 is not stable with SATA and should not be used by any meansis not stable with SATA and should not be used by any means)
- Prev by Date: Re: Changes to sysfs PM layer break userspace
- Next by Date: Re: Network drivers that don't suspend on interface down
- Previous by thread: Re: ReiserFS corruption with 2.6.19 (Was 2.6.19 is not stable with SATA and should not be used by any meansis not stable with SATA and should not be used by any means)
- Next by thread: Re: ReiserFS corruption with 2.6.19 (Was 2.6.19 is not stable with SATA and should not be used by any meansis not stable with SATA and should not be used by any means)
- Index(es):
 |