Signed-off-by: Steve Wise <[email protected]>
---
drivers/infiniband/Kconfig | 1 +
drivers/infiniband/Makefile | 1 +
drivers/infiniband/hw/cxgb3/Kconfig | 27 +++++++++++++++++++++++++++
drivers/infiniband/hw/cxgb3/Makefile | 12 ++++++++++++
4 files changed, 41 insertions(+), 0 deletions(-)
diff --git a/drivers/infiniband/Kconfig b/drivers/infiniband/Kconfig
index 59b3932..06453ab 100644
--- a/drivers/infiniband/Kconfig
+++ b/drivers/infiniband/Kconfig
@@ -38,6 +38,7 @@ source "drivers/infiniband/hw/mthca/Kcon
source "drivers/infiniband/hw/ipath/Kconfig"
source "drivers/infiniband/hw/ehca/Kconfig"
source "drivers/infiniband/hw/amso1100/Kconfig"
+source "drivers/infiniband/hw/cxgb3/Kconfig"
source "drivers/infiniband/ulp/ipoib/Kconfig"
diff --git a/drivers/infiniband/Makefile b/drivers/infiniband/Makefile
index 570b30a..69bdd55 100644
--- a/drivers/infiniband/Makefile
+++ b/drivers/infiniband/Makefile
@@ -3,6 +3,7 @@ obj-$(CONFIG_INFINIBAND_MTHCA) += hw/mt
obj-$(CONFIG_INFINIBAND_IPATH) += hw/ipath/
obj-$(CONFIG_INFINIBAND_EHCA) += hw/ehca/
obj-$(CONFIG_INFINIBAND_AMSO1100) += hw/amso1100/
+obj-$(CONFIG_INFINIBAND_CXGB3) += hw/cxgb3/
obj-$(CONFIG_INFINIBAND_IPOIB) += ulp/ipoib/
obj-$(CONFIG_INFINIBAND_SRP) += ulp/srp/
obj-$(CONFIG_INFINIBAND_ISER) += ulp/iser/
diff --git a/drivers/infiniband/hw/cxgb3/Kconfig b/drivers/infiniband/hw/cxgb3/Kconfig
new file mode 100644
index 0000000..d3db264
--- /dev/null
+++ b/drivers/infiniband/hw/cxgb3/Kconfig
@@ -0,0 +1,27 @@
+config INFINIBAND_CXGB3
+ tristate "Chelsio RDMA Driver"
+ depends on CHELSIO_T3 && INFINIBAND
+ select GENERIC_ALLOCATOR
+ ---help---
+ This is an iWARP/RDMA driver for the Chelsio T3 1GbE and
+ 10GbE adapters.
+
+ For general information about Chelsio and our products, visit
+ our website at <http://www.chelsio.com>.
+
+ For customer support, please visit our customer support page at
+ <http://www.chelsio.com/support.htm>.
+
+ Please send feedback to <[email protected]>.
+
+ To compile this driver as a module, choose M here: the module
+ will be called iw_cxgb3.
+
+config INFINIBAND_CXGB3_DEBUG
+ bool "Verbose debugging output"
+ depends on INFINIBAND_CXGB3
+ default n
+ ---help---
+ This option causes the Chelsio RDMA driver to produce copious
+ amounts of debug messages. Select this if you are developing
+ the driver or trying to diagnose a problem.
diff --git a/drivers/infiniband/hw/cxgb3/Makefile b/drivers/infiniband/hw/cxgb3/Makefile
new file mode 100644
index 0000000..7a89f6d
--- /dev/null
+++ b/drivers/infiniband/hw/cxgb3/Makefile
@@ -0,0 +1,12 @@
+EXTRA_CFLAGS += -I$(TOPDIR)/drivers/net/cxgb3 \
+ -I$(TOPDIR)/drivers/infiniband/hw/cxgb3/core
+
+obj-$(CONFIG_INFINIBAND_CXGB3) += iw_cxgb3.o
+
+iw_cxgb3-y := iwch_cm.o iwch_ev.o iwch_cq.o iwch_qp.o iwch_mem.o \
+ iwch_provider.o iwch.o core/cxio_hal.o core/cxio_resource.o
+
+ifdef CONFIG_INFINIBAND_CXGB3_DEBUG
+EXTRA_CFLAGS += -DDEBUG -g
+iw_cxgb3-y += core/cxio_dbg.o
+endif
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
